Search Results

Water is of critical importance to space missions due to crew needs and the cost of supply. To control mission costs, it is essential to recycle water from all available wastes - both solids and liquids. Water recovery from liquid water wastes has already been accomplished on space missions. For instance, a Water Recycling System (WRS) is currently operational on the International Space Station (ISS). It recovers water from urine and humidity condensate and processes it to potable water specifications. However, there is more recoverable water in solid wastes such as uneaten food, wet trash, feces, paper and packaging material, and brine. Previous studies have established the feasibility of obtaining a considerable amount of water and oxygen from these wastes (Pisharody et al, 2002; Fisher et al, 2008; Wignarajah et al, 2008).

Since the mid 1980s, NASA has developed advanced waste management technologies that collect and process waste. These technologies include incineration, hydrothermal oxidation, pyrolysis, electrochemical oxidation, activated carbon production, brine dewatering, slurry bioreactor oxidation, composting, NOx control, compaction, and waste collection. Some of these technologies recover resources such as water, oxygen, nitrogen, carbon dioxide, carbon, fuels, and nutrients. Other technologies such as the Waste Collection System (WCS - the commode) collect waste for storage or processing. The need for waste processing varies greatly depending upon the mission scenario. This paper reviews the waste management technology development activities conducted by NASA since the mid 1980s and explores the drivers that determine the application of these technologies to future missions.

Over the last three years, the University of Utah (UofU), NASA Ames Research Center (ARC), and Reaction Engineering International (REI) have been developing an incineration system for the regeneration of components in waste materials for long-term life support systems. The system includes a fluidized bed combustor and a catalytic flue gas clean up system. An experimental version of the incinerator was built at the UofU. The incinerator was tested and modified at ARC and then operated during the Phase III human testing at NASA Johnson Space Center (JSC) during 1997. This paper presents the results of the work at the three locations: the design and testing at UofU, the testing and modification at ARC, and the integration and operation during the Phase III tests at JSC.

Equivalent System Mass (ESM) is used by the Advanced Life Support (ALS) community to quantify mission costs of technologies for space applications (Drysdale et al, 1999, Levri et al, 2000). Mass is used as a cost measure because the mass of an object determines propulsion (acceleration) cost (i.e. amount of fuel needed), and costs relating to propulsion dominate mission cost. Mission location drives mission cost because acceleration is typically required to initiate and complete a change in location. Total mission costs may be reduced by minimizing the mass of materials that must be propelled to each distinct location. In order to minimize fuel requirements for missions beyond low-Earth orbit (LEO), the hardware and astronauts may not all go to the same location. For example, on a Lunar or Mars mission, some of the hardware or astronauts may stay in orbit while the rest of the hardware and astronauts descend to the planetary surface.

In “Theory and Application of the Equivalent System Mass Metric,” Levri, Vaccari, and Drysdale computed the Equivalent System Mass (ESM) of crew time. ESM is a cost-type metric based on allocated mass that is often used in life support systems. The previous paper suggested that the cost per hour of crew time should be equal to the ESM of the life support system, divided by the number of available crew work hours. We suggest here that the mass cost for additional crew time may be as large as the total mission mass or as small as the added mass of consumables, depending on how much more crew time is needed. If the increased mission work load requires flying additional crewmembers, the total mass and cost of the mission increases roughly proportionally to crew size. But if the needed work can be done merely by extending the mission duration, the required additional mass is only that of the food and supplies to be consumed during the time extension.

Handling and processing human feces in space habitats is a major concern and needs to be addressed for the Crew Exploration Vehicle (CEV) as well as for future exploration activities. In order to ensure crew health and safety, feces should either be isolated in a dried form to prevent microbial activity, or be processed to yield a non-biohazardous product using a reliable technology. During laboratory testing of new feces processing technologies, use of “real” feces can impede progress due to practical issues such as safety and handling thereby limiting experimental investigations. The availability of a non-hazardous simulant or analogue of feces can overcome this limitation. Use of a simulant can speed up research and ensure a safe laboratory environment. At Ames Research Center, we have undertaken the task of developing human fecal simulants. In field investigations, human feces show wide variations in their chemical/physical composition.

A workshop entitled the “Life Support & Habitation and Planetary Protection Workshop” was held in Houston, TX in April, 2005. The main objective of the workshop was to initiate communication, understanding, and a working relationship between the Life Support and Habitation1 (LSH) and Planetary Protection (PP) communities regarding the effect of the implementation of Mars human exploration PP policies on the Advanced Life Support2 (ALS), Advanced Extravehicular Activity (AEVA), and Advanced Environmental Monitoring and Control (AEMC) programs. This paper presents an overall summary of the workshop that includes workshop organization, objectives, starting assumptions, findings and recommendations. Specific result topics include the identification of knowledge and technology gaps, research and technology development (R&TD) needs, potential forward and back contaminants and pathways, mitigation alternatives, and PP requirements definition needs.

Long duration missions pose substantial new challenges for solid waste management in Advanced Life Support (ALS) systems. These possibly include storing large volumes of waste material in a safe manner, rendering wastes stable or sterilized for extended periods of time, and/or processing wastes for recovery of vital resources. This is further complicated because future missions remain ill-defined with respect to waste stream quantity, composition and generation schedule. Without definitive knowledge of this information, development of mission requirements is hampered. Additionally, even if waste streams were well characterized, other operational and processing needs require clarification (e.g. resource recovery requirements and planetary protection constraints). Therefore, the development of solid waste management (SWM) subsystem requirements for long duration space missions is an inherently uncertain, complex and iterative process.

The INTEGRITY Program will design and operate a test bed facility to help prepare for future beyond-LEO missions. The purpose of INTEGRITY is to enable future missions by developing, testing, and demonstrating advanced human space systems. INTEGRITY will also implement and validate advanced management techniques including risk analysis and mitigation. One important way INTEGRITY will help enable future missions is by reducing their risk. A risk analysis of human space missions is important in defining the steps that INTEGRITY should take to mitigate risk. This paper describes how a Probabilistic Risk Assessment (PRA) of human space missions will help support the planning and development of INTEGRITY to maximize its benefits to future missions. PRA is a systematic methodology to decompose the system into subsystems and components, to quantify the failure risk as a function of the design elements and their corresponding probability of failure.

NASA Ames Research Center and Lawrence Berkeley National lab have completed a three-year joint NRA research project on the use of waste biomass to make a gaseous contaminant removal system. The objective of the research was to produce activated carbon from life support wastes and to use the activated carbon to adsorb and remove incineration flue gas contaminants such as NOx. Inedible biomass waste from food production was the primary waste considered for conversion to activated carbon. Previous research at NASA Ames has demonstrated the adsorption of both NOx and SO2 on activated carbon made from biomass and the subsequent conversion of adsorbed NOx to nitrogen and SO2 to sulfur. This paper presents the results testing the whole process system consisting of making, using, and regenerating activated carbon with relevant feed from an actual incinerator. Factors regarding carbon preparation, adsorption and regeneration are addressed.

This paper presents the results from a joint research initiative between NASA Ames Research Center and Lawrence Berkeley National lab. The objective of the research is to produce activated carbon from life support wastes and to use the activated carbon to adsorb and chemically reduce the NOx and SO2 contained in incinerator flue gas. Inedible biomass waste from food production is the primary waste considered for conversion to activated carbon. Results to date show adsorption of both NOx and SO2 in activated carbon made from biomass. Conversion of adsorbed NOx to nitrogen has also been observed.

The Advanced Integration Matrix (AIM) Project will investigate systems integration and test for the Vision for Space Exploration. The goal of AIM is to reduce the risk of future human missions by identifying those significant risks that Earth-based integration and test can reduce. AIM will focus on the mission requirements that need verification beyond component/subsystem testing, but that can still be tested on Earth. In order to help set priorities for AIM, this paper describes a preliminary Probabilistic Risk Analysis (PRA) framework that was developed based on the Vision for Space Exploration. The PRA provides a decision-making tool to balance mission risk, performance, and cost.

Advanced space life support systems, especially systems that include growing plants to produce food, require the recovery of resources - primarily carbon dioxide and water - from various hydrocarbon wastes. Supercritical water oxidation (SCWO) of wastes is one of several possible techniques for oxidizing waste organics to recover the carbon dioxide and water. Supercritical water oxidation has the advantages of fast kinetics, complete oxidation, and the minimization of undesirable side products. However, the SCWO process requires further development before the process can be implemented in space life systems. One of the SCWO development needs is in the area of destruction of insoluble solids - such as inedible biomass or human wastes. Insoluble solids have to be introduced into a SCWO reactor as particles, and it can be expected that the particle size of the solids will affect the rate of reaction.

For Supercritical Water Oxidation (SCWO), particle size is a key factor effecting requirements for feed preparation, slurry concentration and pumping, rate of reaction, and reactor size. To address these issues, an experimental research program was undertaken to evaluate the effect of particle size on the reaction kinetics in SCWO of solid particulates (wheat straw and cellulose particles in this case). The experiments also included evaluation of the effects of temperature, pressure, and agitation. Some corrosion data were obtained. A two-step reaction mechanism was revealed. Empirically based mathematical relationships were developed that can be used for SCWO system design.

In this paper we have developed a unique approach to providing the elements required for crop production in a steady-state condition, which is essential for Space habitats. The approach takes into consideration human elemental requirements and crop requirements for healthy growth and develops a method for the calculation of the rates of nutrient uptake for the different elements for different crops. The uptake rates can be used to calculate the rate of nutrient supply required in the hydroponic solution. This approach ensures that crops produced will not have excessive levels of elements that may be harmful to humans. It also provides an opportunity to optimize the processes of crop production and waste processing through highly controlled feed rates.

The electrosynthesis of expendable reagents including acids, bases, and oxidants from simple salts or salt mixtures has been demonstrated using a variety of electrochemical cells. A five chambered electrodialytic water splitting (EDWS) cell with bipolar membranes was utilized to efficiently convert sodium sulfate, sodium chloride, potassium nitrate, and potassium chloride to conjugate acids and bases. With the same cell, selective segregation of cations and anions from mixed salt solutions occurred, resulting in relatively pure acids and bases. These results suggest that pure acids and bases can be produced from composite spacecraft brines. Chemical oxidants such as sodium and ammonium persulfate were also synthesized with high current efficiencies by the electrooxidation of salts and acids in a two chambered electrochemical cell.

A Microwave Enhanced Solid Waste Freeze Drying Prototype system has been developed for the treatment of solid waste materials generated during extended manned space missions. The system recovers water initially contained within wastes and stabilizes the residue with respect to microbial growth. Dry waste may then be safely stored or passed on to the next waste treatment process. Operating under vacuum, microwave power provides the energy necessary for sublimation of ice contained within the waste. This water vapor is subsequently collected as relatively pure ice on a Peltier thermoelectric condenser as it travels en route to the vacuum pump. In addition to stabilization via dehydration, microwave enhanced Freeze Drying reduces the microbial population (∼90%) in the waste.

Gradient magnetically assisted fluidized bed (G-MAFB) methods are under development for the decomposition of solid waste materials in microgravity and hypogravity environments. The G-MAFB has been demonstrated in both laboratory and microgravity flight experiments. In this paper we summarize the results of gasification reactions conducted under a variety of conditions, including: combustion, pyrolysis (thermal decomposition), and steam reforming with and without oxygen addition. Wheat straw, representing a typical inedible plant biomass fraction, was chosen for this study because it is significantly more difficult to gasify than many other typical forms of solid waste such as food scraps, feces, and paper. In these experiments, major gasification products were quantified, including: ash, char, tar, carbon monoxide, carbon dioxide, methane, oxygen, and hydrogen.

A variety of techniques, including supercritical water oxidation, fluidized bed combustion, and microwave incineration have been applied to the destruction of solid wastes produced in regenerative life support systems supporting long duration manned missions. Among potential problems which still deserve attention are the need for operation in a variety of gravitational environments, and the requirement for improved methods of presenting concentrated solids to the reactor. Significant improvements in these areas are made possible through employment of the magnetically assisted gasification process. In this paper, magnetic methods are described for manipulating the degree of consolidation or fluidization of granular ferromagnetic media, for application in a gravity independent three step solid waste destruction process.

A microwave powered solid waste stabilization and water recovery prototype was delivered to Ames Research Center through an SBIR Phase II contract awarded to Umpqua Research Company. The system uses a container capable of holding 5.7 dm3 volume of waste. The microwave power can be varied to operate either at full power (130 W) or in a variable mode from 0% and 100%. Experiments were conducted with different types of wastes (wet cloth, simulated feces/diarrheal wastes, wet trash and brine) at different levels of moisture content and dried under varying microwave power supply. This paper presents the experimental data. The results provide valuable insight into the different operation modes under which the prototype can be used to recover water from the wastes in a space environment. Further investigations and testing of the prototype are recommended.