Search Results

This document presents criteria for flight deck controls and displays for Airborne Collision Avoidance Systems.

This Aerospace Standard (AS), establishes minimum performance standards for those sensors, computers, transponders, and airplane flight deck controls/displays which together comprise a Takeoff Performance Monitor (TOPM) System. This standard also defines functional capabilities, design requirements, and test procedures. A TOPM system is intended to monitor the progress of the takeoff and to provide advisory information which the crew may use in conjunction with other available cues to decide to continue or abort the takeoff. See Appendix A for supplementary information relating to NTSB, CAA, and ad hoc committee concerns and background information.

This document recommends general specifications for the location, accessibility and restraint for those items of survival, emergency, and miscellaneous equipment which are intended to be used by the flight crew, and which are stowed on or near the flight deck.

This document recommends general specifications for the location, accessibility and restraint for those items of survival, emergency, and miscellaneous equipment which are intended to be used by the flight crew, and which are stowed on or near the flight deck.

This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will mminimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.

This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will minimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.

This document recommends criteria to assure adequate visibility from the flight deck. The flight deck windshield must provide sufficient external vision to permit the pilot to perform any maneuvers within the operating limits of the aircraft safely and at the same time afford and unobstructed view of the flight instruments and other critical components and displays from the same eye position.

This document recommends criteria for the flight deck display of an On Board Weight and Balance System. The system may have the capability of a primary operational device or be a secondary advisory source of information of weight and center of gravity position. The recommendations apply to transport aircraft and describe the operational and functional requirements for the display of an On Board Weight and Balance System.

This document recommends criteria for the flight deck display of an On Board Weight and Balance System. The system may have the capability of a primary operational device or be a secondary advisory source of information of weight and center of gravity position. The recommendations apply to transport aircraft and describe the operational and functional requirements for the display of an On Board Weight and Balance System.

This Standard is intended to establish preferred abbreviations for use on panels, controls, instruments, displays, placards and markings. The recommendations apply to terms used in the flight deck of transport aircraft. The abbreviations, symbols and codes do not supersede those used in airworthiness regulations or aeronautical charts and documents. Where conflict is possible the operational context must be such as to resolve any ambiguity. If doubt exists, an alternative abbreviation or less truncated abbreviation should be used.

This document is intended to establish preferred abbreviations for use on panels, controls, instruments, displays, placards and markings. The recommendations apply to terms used in the flight deck of transport aircraft. The abbreviations, symbols and codes do not supersede those used in airworthiness regulations or aeronautical charts and documents. Where conflict is possible, the operational context must be such as to resolve any ambiguity. If doubt exists, an alternative abbreviation or less truncated abbreviation should be used.

pilots, air traffic controllers, dispatchers, aviation meteorologists

This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This document recommends criteria and requirements for a flight management system (FMS) for transport aircraft. The FMS shall provide the functions of lateral navigation, vertical navigation, and performance management and may include time of arrival control. The FMS design shall take human factors considerations into account to produce a fault tolerant system.

This document recommends criteria and requirements for a Flight Management System (FMS) for transport aircraft. The FMS shall provide the functions of Lateral Navigation, Vertical Navigation, and Performance Management and may include Time of Arrival Control. The FMS design shall take Human Factors considerations into account to produce a fault tolerant system.

This document recommends criteria for the design, installation and operation of panels, controls, and displays on the flight deck of transport aircraft.

This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.