Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

When fuel cells fly Emerging hydrogen and fuel-cell-based technologies are being developed for the future replacement of onboard electrical systems in more-electric or all-electric aircraft. Motor controls spin forward Improved power handling and software advances make electrified powertrains more competitive. Multiple controllers adds to EV complexity Model-based design has revolutionized the way products are developed, with design shifting from parts to the whole.

The row about rare earths Rare-earth elements are key to applications as varied as traction motors, catalytic converters, and wind turbines, but high prices and supply shortages have the auto industry grappling with design changes and other alternatives.

'Infernal' combustion no more Continuous improvements to the 130-year-old ICE aim to keep conventional engines ahead of electric drive. Alternative fuels tested at altitude Federal government researchers in Canada tested certain alternative fuels at simulated altitudes and found that they do offer some benefit.

Alternative fuels heat up This is a rich time for combustion researchers. The need for better fuel efficiency and improved emissions has never been greater. New software model to help engine makers meet diesel soot standards Simulation enables engineers to predict particulate formation early in the design process.

Integration opens the door Semiconductor suppliers are integrating many functions into power devices while also cutting power consumption in an environment, automotive doors, where 8-bit microcontrollers still hold sway.

Solving the carbon problem Promoting a sustainable future for the transportation industry will benefit the welfare of humankind. My Baja SAE journey Every day, I realize how much Baja SAE has taught me-both in life and in engineering. Honda unveils next-gen motorcycle powertrains New engines designed for low-speed torque, fuel efficiency, and riding 'character' are coupled with new DCT and CVT transmissions. Three rules of career management for 2012 Do you have a career management plan to ensure your career growth in times of corporate chaos?

Inductive approach An engineering professor from Ryerson uses MapleSim to introduce more exploratory methods of teaching. Monash University scores fourth Formula SAE-A win The Monash University Formula SAE-A team demonstrated its dominance by winning its fourth consecutive Australasian event in Melbourne last December. Audi Urban Intelligent Assist The three-year joint effort between Audi AG, the Volkswagen Group Electronics Research Laboratory (ERL) in Belmont, CA, the University of Southern California, the University of California at Berkeley, and the University of California at San Diego aimed at improving drivers' information and decision-making capabilities. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher-quality point-to-point air transport.

SAE Supermileage champ achieves 2158 mpg Teams of collegiate engineering students show pathways to amazing vehicle fuel efficiency inthe 32nd annual competition, making the top 10 meant beating 500 mpg! Engineer employment study reveals positive hiring trends A recent study from SAE analysts suggests that the future may be looking up for mobility engineers on the job hunt. Oklahoma's active Aero attack Students at the University of Oklahoma have spurred new ideas for aerodynamics development in Formula SAE with their newest wing package. SJSU grad, GM engineer receives Rumbaugh Award Rumbaugh Award recipient Randy Floresca says being involved with SAE was key to securing his current job. Electronics take the lead in the motorcycle race Bike-industry engineers are integrating electronic and electrical technologies in the quest for higher performance, more features-and zero emissions.

Engineering a turnaround After months of financial turmoil and a scarcity of jobs, new engineers may finally be finding some relief about life after college. Do you have what it takes? When the stress of a school project becomes too much to handle, passion and determination can take you a long way. Bloodhound on the land speed record trail One thousand miles per hour is the ambitious target for Project Bloodhound SSC (super sonic car). A record run is planned for August 2011 at the Hakskeen Pan, in Northern Cape province, South Africa. Where the rubber meets the road and grease meets the fingernails Participants in SAE International's Collegiate Design Series (CDS) generally lack in one significant area: sleep.

Teaming to win Oregon State University and Duale Hochschule Baden-Wurttemberg-Ravensburg announce global formula racing collaboration. Exploring Michigan's solar continuum A look back at the winning car's solar energy management strategy reveals the crucial role of software tools in the success. Engineering is art At Audi, design and engineering work together to create vehicles that meld aesthetics with physical necessity.

Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.

Oil debris monitoring in aero engines In a gas turbine engine, small particles or "chips" are generated at the point of wear, serving as an advanced warning that catastrophic failure will occur if the wear is not addressed. Health monitoring systems, such as oil debris monitoring, are used to find these small particles so that the wear can be resolved before it's too late. Indigenous powertrain development Customer needs and expectations on drivability, fuel economy, and safety has pushed Indian and multinational OEMs to think about the development of powertrains and gearboxes for local needs with global standards. The next wave of crash simulation As computing speed has improved and software itself has made significant speed and performance gains with each release, modeling tools are now quick enough to build high-quality, large, high-detail vehicle models in a very efficient manner.

Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.

Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.

Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.

Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality

Touch-less control coming to cars Use of proximity and gesture-recognition systems in auto cockpits could rise fifty-fold within a decade. Forming a strong bond Multi-material vehicles are becoming more prevalent as automakers attempt to reduce vehicle weight and boost fuel efficiency. Selecting the proper adhesive is critical when bonding dissimilar materials. SAE 2014 World Congress preview special section: 'Creating New Possibilities' Host company Hyundai and Tier 1 Strategic Partner, Delphi, established "Creating New Possibilities" as the theme for this year's premier engineering event taking place April 8-10 in Detroit's Cobo Center. This special Congress preview section uncovers some of those possibilities, featuring insights from the event's executive leadership; details of a Delphi/Hyundai advanced engine program; highlights from the technical program in the areas of powertrain, materials, testing and simulation, electronics, interiors, and body/chassis; and more.

Into the DEAP The Distributed Electrical Aerospace Propulsion project looks toward a future optimized integrated propulsion system that will allow cleaner, quieter, and more efficient performance to be incorporated into a radically innovative airframe that will feature enclosed electrically powered fans. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products. To maintain efficiency while continuously improving the quality of products, it is necessary to be able to manage this data in an efficient manner.