Search Results

This specification covers a zinc alloy in the form of die castings.

(From Standards Proposal No. 2358, formulated under the cognizance of the EIA Quality and Reliability Engineering (QRE) Committee.)

Conventional attribute sampling plans based upon nonzero acceptance numbers are no longer desirable. In addition, emphasis is now placed on the quality level that is received by the customer. This relates directly to the Lot Tolerance Percent Defective (LTPD) value or the Limiting Quality Protection of MIL-STD-105. Measuring quality levels in percent nonconforming, although not incorrect, has been replaced with quality levels measured in parts per million (PPM). As a result, this standard addresses the need for sampling plans that can augment MIL-STD-105, are based upon a zero acceptance number, and address quality (nonconformance) levels in the parts per million range. This document does not address minor nonconformances, which are defined as nonconformances that are not likely to reduce materially the usability of the unit of product for its intended purpose.

This specification covers a zinc alloy in the form of die castings.

This specification covers one type of bronze in the form of round wire 0.500 inch (12.70 mm) and under in nominal diameter (see 8.5).

AS81044 covers single conductor electric wires made as specified in the applicable detail specification with tin-coated, silver-coated, or nickel-coated copper or copper alloy conductors insulated with crosslinked polyalkene, crosslinked alkane-imide polymer, or polyarylene. The crosslinked polyalkene, crosslinked alkane-imide polymer, or polyarylene may be used alone or in combination with other insulation materials as specified in the detail specification.

This paper discusses the importance of enroute wind conditions and the need for a wind measurement system which provides accurate and timely observations of wind and temperature conditions aloft. Recent advances in remote measurement of winds, temperature, and humidity such as the Stratospheric-Tropospheric radars and profilers developed at the National Oceanic and Atmospheric Administration’s Environmental Research Lab form the basis of such a system. A domestic system could and should be established using these devices together with a near real time winds aloft data dissemination network. Estimates of the saving in aircraft fuel consumption benefits range from 1 to 3 percent per year, or from $ 100 to $ 300 million for U.S. aviation system users at current prices and consumption.

This paper is concerned with the development of statistical models for the gust field in the lowest 300 ft of the atmosphere. It presents some of the highlights of the underlying physics principles, what is known about gusts, and how gusts affect aircraft. The difficulties of developing gust models are accounted for by the lack of data in particular areas and thus direct attention to the work required to provide the needed information.

This paper was prepared to support supersession of MIL-S-8879C with Screw Thread Conformity Task Force selected industry standard AS8879C, published by the Society of Automotive Engineers (SAE). Other documentation changes will be covered by separate papers. Separate papers are anticipated for thread gaging issues, and thread gage calibration procedures. The STC-TF decided that the thread design standard needed to be completed before thread gage definition could be addressed. Thread gage definition has to be known before calibration procedures can be addressed.

This document recommends supplementary design criteria to enhance endurance and reliability of transport aircraft wheels and brakes.

This document recommends supplementary design criteria to enhance endurance and reliability of transport aircraft wheels and brakes.

This document recommends supplementary design criteria to enhance endurance and reliability of transport aircraft wheels and brakes.

On the whole, strategic sourcing and supplier rationalization have been successful Original Equipment Manufacturer (OEM) strategies. Often ignored however, are some of the longer-term ramifications of strategic sourcing and supplier rationalization that are less favorable, particularly if, in the process of embarking upon these strategies, an OEM looses visibility into and/or relinquishes control over, the finished part bill of material (BOM). Finished part BOM is defined as all of the material “inputs” that go into a manufactured part materials such as bar, sheet, tube, wire, fasteners, etc. This negative consequence of outsourcing, the loss of BOM visibility and control, can dilute and even undermine the very strategy that spawned it.

Unmanned Aerial Vehicles (UAV) are being deployed in military, law enforcement, search & rescue, scientific research, environmental & climate studies, reconnaissance and other commercial and non-commercial applications on a large scale. A design and development of landing gear system has been taken up for a UAV. This paper presents the design optimization of structural components of Wheel-Brake & Fork assembly pertaining to the Main Landing Gear (MLG) for a UAV. The wheel, fork, axle and brake unit constitute the wheel assembly. The wheel-brake assembly is assembled with the strut assembly and forms the Landing gear system. The Fork is the connecting member between the shock strut and the axle containing the wheel-brake assembly. As the fork and axle are subjected to shock loads while landing, the strength of these components are very much essential to withstand the dynamic loads.

Premature wearout of augmentor hydraulic fuel pumps was being experienced in service on a fighter aircraft engine. The removal times ranged from 150 to 800 engine operating hours. Considerable effort had gone into the understanding of the physics of failure and overcoming this problem in a modified pump. However, there still remained the question of how best to proof test the new pump. The challenge was to demonstrate that the redesigned pump was significantly better than the old pump. The problems faced during design verification will be discussed in this case study. For example, does an accelerated test duplicate the service failure mode? When has an accelerated test run long enough to prove the redesign is in fact better than the old product? This paper illustrates the application of new technology to solve these research and development program problems through the use of Weibull and Weibayes Analysis.

RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.

This document establishes the minimum requirements for an environmental test chamber, and test procedures to carry out anti-icing performance tests according to the current materials specification for aircraft deicing/anti-icing fluids. The primary purpose for such a test method is to determine the anti-icing endurance under controlled laboratory conditions of AMS1424 Type I and AMS1428 Type II, III, and IV.

This procurement specification covers plain helical lock washers fabricated from heat treated carbon steel.