Search Results

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

The buzz about electric aircraft Emissions limits force the aviation industry to study hybrid and battery-electric propulsion systems. Car-to-X marks the secure beamforming spot Intelligent networking of cars and infrastructure promises a future of enhanced active safety and traffic efficiency, though as an open and decentralized system, car-to-X is exposed to various attacks against security and driver's privacy. Talking big A look at factors that should be considered by OEMs when implementing a telematics solution in the heavy-duty on- and off-highway mobile equipment markets.

Why Volt? After 48 months' development, the 2011 Chevrolet Volt has enetered series production. The pioneering "E-REV" is as important to the mobility industry as it is to GM. Creating the heart of Volt GM's battery requirements meant creating new state-of-the-art in-vehicle engery storage - and doing it in less than four years. Top GM and supplier engineers reveal how they did it. Engineering with maniacal focus A dedicated, cohesive team and a conservative engineering approach put this innovative vehicle into production at moon-shot speed. A unique electrified transaxle Hybrid or not? Definitions aside, what really matters is GM wisely leveraged its next-generation Two Mode propulsion technology to give Volt greater overall efficiency. Sweating the body details Extensive wind-tunnel work gave Volt a shape that's slicker than it looks. But engineers aren't happy with the curb weight.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Securing IT in the sky Along with IT systems and communication links comes IT security as a new factor when evaluating and monitoring the operational risk that needs to be managed during the operation of the aircraft. Data collection made easy Heavy vehicle makers, telematics providers strive to add more features while simplifying startup.

On the cusp of connected cars An auto consortium is set to put the wireless V2X safety network to the test with 120 cars in the Frankfurt region. Thinking long and hard about heavy-duty telematics A study of the factors that should be considered by a vehicle OEM when implementing a telematics solution in heavy on- and off-highway mobile equipment markets.

Diesel gets a promotion at SAE Clean Snowmobile Challenge The main rules change for the 2015 season is creation of a new engine category (diesel), the event's organizer notes in providing an overview of the SAE Collegiate Design Series competition. Wisconsin-Stout puts faith in gearbox redesign for Baja Blue Devil Racing Team believes packaging and durability advantages more than offset weight and low-end-torque penalties. Test cell at Kansas University does double duty Single-cylinder engine test cell designed for research into biodiesel also serves as an instruction tool for students. University of Michigan students have hand in Volt battery reliability Technology co-developed by U of M monitors the quality of welds used in the joining of Chevy Volt battery cells.

Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.

When real life and FEA meet Model validation becomes the focus for building the chassis of a BAJA SAE vehicle. One student offers his advice for making smart choices while using FEA. Wait...where is Manitoba? Andrew Smith, Executive Vice Chair for the University of Manitoba's SAE International Chapter faces limited resources and the growth of what was once a small team. High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks.

Inductive approach An engineering professor from Ryerson uses MapleSim to introduce more exploratory methods of teaching. Monash University scores fourth Formula SAE-A win The Monash University Formula SAE-A team demonstrated its dominance by winning its fourth consecutive Australasian event in Melbourne last December. Audi Urban Intelligent Assist The three-year joint effort between Audi AG, the Volkswagen Group Electronics Research Laboratory (ERL) in Belmont, CA, the University of Southern California, the University of California at Berkeley, and the University of California at San Diego aimed at improving drivers' information and decision-making capabilities. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher-quality point-to-point air transport.

ETS Baja parts failure analysis: Geared for success When the ETS Baja team had to withdraw from the Baja Auburn 2012 event due to abnormal gear failure, an extensive analysis was required to ensure that problems of this nature would not surface again. After some serious investigation, the conclusion of almost 30 hours of research was unexpected and proved surprisingly simple. Body and soul rule at 2012 Formula SAE Months before the Formula SAE Michigan competition in May, teams were hashing out product development decisions. The end-game was presenting a racecar that had the right stuff for earning high points in the challenge's vehicle design evaluation as well as the acceleration, skid pad, endurance, and autocross dynamic performance events.

Electrochemical reactions Students from the Department of Automotive Engineering at the NED University of Engineering and Technology build the first onboard fuel-cell vehicle of Pakistan. The Baja balance How to combine heavy homework load with your CDS team responsibilities. Embraer progresses on clean-sheet military program It has been over two years since Embraer announced that it would be developing the KC-390 military airlift and tanker jet under a contract with the Brazilian Air Force (FAB), which established the requirements for the aircraft as it did with other Embraer military programs. Calling all recruiters Lack of response to distributed resumes leaves many wondering, is anyone out there?

Formula SAE-a winners again Monash University took the top spot in the 2010 Formula SAE-Australasia student competition for the second year in a row. Dual-fuel lab engines achieve high efficiencies, low emissions Experiments conducted by researchers at the University of Wisconsin-Madison as well as at Oak Ridge National laboratory demonstrate that partial blending of two fuels in the cylinder can promote a more ideal combustion process. Detroit motor show Small and efficient cars stole the show at the recent North American International auto show. nextgen today and tomorrow The FAA has reached a major milestone on the next generation air transportation system initiative to modernize America's national airspace system.

High-speed education @ formula hybrid event Annual competition provides a hands-on learning experience for undergraduate and graduate engineering students. Body-shaped for supermileage Six different single-occupant vehicles designed and built by teams of collegiate engineering students snared four-digit fuel economy at Eaton Corp.'s Marshall, MI, test track during the 31st annual SAE Supermileage competition in June. Mercedes-AMG goes with the current flow Opening the doors on new technology. First flight approaches for 'disruptive' new UAV engine An earlier iteration of UAS' Nightwind 2 in flight, powered by an off-the-shelf industrial engine. Three resume tips for college grads Employers often hire recent graduates to mold new hires to their own corporate culture and work philosophy, leading some employers to look more for potential than for specific experience.

Giving the blind the freedom to drive A Virginia Tech student team answers a call to action by the National Federation of the Blind's Jernigan Institute. 'Ultimate Youthmobile' of 2030 At the 2009 LA Auto Show, California designers envision the future. BMW's six-cylinder motorcycle Concept points to possible production bike. Modeling and simulation put emphasis on early planning The shift to model-based design and simulation is changing the way aircraft are designed, shifting the focus to the early phases of development. Early planning is critical for success, as is establishing techniques that ensure that files move freely between various work teams.

The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.

The car is the star at Formula SAE 2019 saw more Formula SAE competitions, more cars, more teams…and more victories. Air mission Introduction of autonomous gliders were among the changes implemented for SAE Aero Design 2019. Baja believers The battle for the Baja SAE season championship went down to the wire, as usual. Competition comes to Mcity University of Toronto repeats as winner in the second year of the AutoDrive Challenge.

Universität Suttgart tops the field at Formula SAE Michigan A team from Universidad Politecnica de Valencia in Spain surprised the field by capturing third-place overall and first place in the Endurance event on a course that featured a hairpin turn. AutoDrive Challenge: cultivating a new generation of engineers This newest SAE International Collegiate Design Series competition serves as a proving ground for engineers interested careers related to autonomous driving. RIT brings home the Mike Schmidt Memorial Award for best Baja SAE season RIOT RACING ends Michigan Baja Racing's three-year reign as season champion. Lords of the skies A new rule for SAE Aero Design 2018 required planes in the Micro class to carry PVC piping as payload.

Advanced Class Starship Georgia Tech team right on the mark with glider-deploying RC aircraft at SAE Aero Design competition. 75 points Much more time and energy go into a Formula SAE Presentation Event than one might think. Major redesign A new electronic CVT highlighted a year of major vehicle upgrades for the historically strong Baja SAE team from ETS.

Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.