Search Results

Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

2010-05-11

HISTORICAL

J1614_201005

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

2012-09-13

HISTORICAL

J1614_201209

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

2018-11-21

CURRENT

J1614_201811

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

Standard

Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines

2008-01-15

HISTORICAL

J1614_200801

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on construction, agricultural, and general purpose industrial categories of off-road self-propelled work machines as defined in SAE J1116.

Standard

Power Cable Terminals

2007-11-16

HISTORICAL

J1811_200711

This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies.

Standard

Power Cable Terminals

2002-10-31

HISTORICAL

J1811_200210

This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies.

Standard

Heavy-Duty Electrical Connector Performance Standard

2007-05-07

HISTORICAL

J2030_200705

This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.

Standard

Heavy-Duty Electrical Connector Performance Standard

2002-12-13

HISTORICAL

J2030_200212

This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.

Standard

Electrical Propulsion Control—Off-Road Dumpers

2003-09-09

HISTORICAL

J1299_200309

This SAE Information Report applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in J/ISO 6165. The document does not apply to auxiliary equipment control systems such as: a Battery charging systems b Engine wiring and control c Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system d Lighting e Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).

Standard

Electrical Propulsion Control - Off-Road Dumpers

2013-02-21

CURRENT

J1299_201302

This SAE Information Report applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in J/ISO 6165. The document does not apply to auxiliary equipment control systems such as: a Battery charging systems b Engine wiring and control c Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system d Lighting e Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).

Standard

Electrical Indicating System Specification

2015-10-08

CURRENT

J1810_201510

This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116 and agricultural tractors as defined in ASAE S390. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.

Standard

Electrical Indicating System Specification

2010-05-11

HISTORICAL

J1810_201005

This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116 and agricultural tractors as defined in ASAE S390. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.

Standard

Electrical Indicating System Specification

2002-04-02

HISTORICAL

J1810_200204

This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.

Standard

Electrical Grounding Practice

2002-10-31

HISTORICAL

J1908_200210

This SAE Standard outlines general procedures for the grounding of electrical components in 12- and 24-V systems, intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116.

Standard

Electrical Grounding Practice

2007-11-16

HISTORICAL

J1908_200711

This SAE Standard outlines general procedures for the grounding of electrical components in 12- and 24-V systems, intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116.

Standard

Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery

2000-07-19

HISTORICAL

J1283_200007

This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding.

Standard

Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery

2008-05-30

HISTORICAL

J1283_200805

This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding.

Standard

Electrical Charging Systems for Off Highway Work Machines

2002-01-31

HISTORICAL

J180_200201

This SAE document describes alternator physical, performance and application requirements for heavy-duty electrical charging systems for on and off road applications including those defined in SAE J1116.

Standard

ELECTRICAL WIRING SYSTEMS FOR CONSTRUCTION, AGRICULTURAL AND OFF-ROAD MACHINES

1985-05-01

HISTORICAL

J821_198505

This recommended practice applies to off-road, self-propelled work machines defined in SAE J1116 JUN81.

Standard

ELECTRICAL PROPULSION CONTROL - OFF-ROAD DUMPERS

1982-08-01

HISTORICAL

J1299_198208

This recommended practice applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in SAE J1057. The recommended practice does not apply to auxiliary equipment control systems such as: (a) Battery charging systems (b) Engine wiring and control (c) Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system (d) Lighting (e) Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).