Refine Your Search

Topic

Author

Search Results

Standard

Windshield Wiper Systems--Trucks, Buses, and Multipurpose Vehicles

2003-07-29
HISTORICAL
J198_200307
This SAE Recommended Practice establishes for trucks, buses, and multipurpose passenger vehicles with GVW of 4500 kg (10 000 lb) or greater: Minimum performance requirements for windshield wiping systems. Uniform test procedures that include those tests that can be conducted on uniform test equipment by commercially available laboratory facilities. Uniform terminology of windshield wiper system characteristics and phenomena consistent with those found in guides for the use of engineering layout studies to evaluate system performance. Guides for the design and location of components of the systems for function, servicing of the system, etc. The test procedures and minimum performance requirements, outlined in this document, are based on currently available engineering data. It is the intent that all portions of the document will be periodically reviewed and revised as additional data regarding windshield wiping system performance are developed.
Standard

Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles

2013-11-18
WIP
J198
This SAE Recommended Practice establishes for left-hand steer on-road trucks, buses, and multipurpose passenger vehicles with GVW of 4500 kg (10 000 lb) or greater: a. Minimum performance requirements for windshield wiping systems. b. Uniform test procedures that include those tests that can be conducted on uniform test equipment by commercially available laboratory facilities. c. Uniform terminology of windshield wiper system characteristics and phenomena consistent with those found in guides for the use of engineering layout studies to evaluate system performance. d. Guides for the design and location of components of the systems for function, servicing of the system, etc. The test procedures and minimum performance requirements, outlined in this document, are based on currently available engineering data. It is the intent that all portions of the document will be periodically reviewed and revised as additional data regarding windshield wiping system performance are developed.
Standard

Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles

1991-06-01
HISTORICAL
J198_199106
This SAE Recommended Practice establishes for left-hand steer on-road trucks, buses, and multipurpose passenger vehicles with GVW of 4500 kg (10 000 lb) or greater: a. Minimum performance requirements for windshield wiping systems. b. Uniform test procedures that include those tests that can be conducted on uniform test equipment by commercially available laboratory facilities. c. Uniform terminology of windshield wiper system characteristics and phenomena consistent with those found in guides for the use of engineering layout studies to evaluate system performance. d. Guides for the design and location of components of the systems for function, servicing of the system, etc. The test procedures and minimum performance requirements, outlined in this document, are based on currently available engineering data. It is the intent that all portions of the document will be periodically reviewed and revised as additional data regarding windshield wiping system performance are developed.
Standard

Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles

1971-01-01
HISTORICAL
J198_197101
This SAE Recommended Practice establishes for left-hand steer on-road trucks, buses, and multipurpose passenger vehicles with GVW of 4500 kg (10 000 lb) or greater: a. Minimum performance requirements for windshield wiping systems. b. Uniform test procedures that include those tests that can be conducted on uniform test equipment by commercially available laboratory facilities. c. Uniform terminology of windshield wiper system characteristics and phenomena consistent with those found in guides for the use of engineering layout studies to evaluate system performance. d. Guides for the design and location of components of the systems for function, servicing of the system, etc. The test procedures and minimum performance requirements, outlined in this document, are based on currently available engineering data. It is the intent that all portions of the document will be periodically reviewed and revised as additional data regarding windshield wiping system performance are developed.
Standard

Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles

2012-10-11
CURRENT
J198_201210
This SAE Recommended Practice establishes for left-hand steer on-road trucks, buses, and multipurpose passenger vehicles with GVW of 4500 kg (10 000 lb) or greater: a Minimum performance requirements for windshield wiping systems. b Uniform test procedures that include those tests that can be conducted on uniform test equipment by commercially available laboratory facilities. c Uniform terminology of windshield wiper system characteristics and phenomena consistent with those found in guides for the use of engineering layout studies to evaluate system performance. d Guides for the design and location of components of the systems for function, servicing of the system, etc. The test procedures and minimum performance requirements, outlined in this document, are based on currently available engineering data. It is the intent that all portions of the document will be periodically reviewed and revised as additional data regarding windshield wiping system performance are developed.
Standard

Windshield Defrosting Systems Test Procedure and Performance Requirements--Trucks,Buses, and Multipurpose Vehicles

2000-09-29
HISTORICAL
J381_200009
This SAE Recommended Practice establishes uniform test procedures and performance requirements for the defrosting system of enclosed cab trucks, buses, and multipurpose vehicles. It is limited to a test that can be conducted on uniform test equipment in commercially available laboratory facilities. Current engineering practice prescribes that for laboratory evaluation of defroster systems, an ice coating of known thickness be applied to the windshield and left- and right-hand side windows to provide more uniform and repeatable test results, even though under actual conditions such a coating would necessarily be scraped off before driving. The test condition, therefore, represents a more severe condition than the actual condition, where the defroster system must merely be capable of maintaining a cleared viewing area.
Standard

Truck and Bus Multipurpose Vehicle Windshield Washer System

2000-09-15
HISTORICAL
J1944_200009
This SAE Recommended Practice provides the following for the windshield washer system for trucks, buses, and multipurpose vehicles with GVW of 4500 kg (10 000 lb) or greater: a. Minimum performance requirement b. Uniform test procedures. The test procedures are limited to those tests that can be conducted with uniform test equipment by commercially available laboratory facilities. c. Uniform terminology of windshield washer system characteristics and phenomena. The minimum performance requirements and test procedures, outlined in this document, are based on currently available engineering data. It is intended that all portions of the document will be periodically reviewed and revised as additional data on windshield washer system performance are developed.
Standard

Truck and Bus Lane Departure Warning Systems Test Procedure and Minimum Performance Requirements

2018-08-28
CURRENT
J3045_201808
This SAE Recommended Practice establishes a uniform, powered vehicle test procedure and minimum performance requirement for lane departure warning systems used in highway trucks and buses greater than 4546 kg (10000 pounds) GVW. Systems similar in function but different in scope and complexity, including Lane Keeping/Lane Assist and Merge Assist, are not included in this document. This document does not apply to trailers, dollies, etc. This document does not intend to exclude any particular system or sensor technology. The specification will test the functionality of the LDWS (e.g., ability to detect lane presence, and ability to detect an unintended lane departure), its ability to indicate LDWS engagement, its ability to indicate LDWS disengagement, and determine the point at which the LDWS notifies the Human Machine Interface (HMI) or vehicle control system that a lane departure event is detected.
Standard

Truck and Bus Lane Departure Warning Systems Test Procedure

2015-07-30
HISTORICAL
J3045_201507
This SAE recommended practice establishes a uniform, powered vehicle T.P. for lane departure warning systems used in highway trucks and buses greater than 4,546 kg (10,000 lb) GVW. Systems similar in function but different in scope and complexity, including Lane Keeping/Lane Assist and Merge Assist, are not included in this T.P. This T.P. does not apply to trailers, dollies, etc. This T.P. does not intend to exclude any particular system or sensor technology. The specification will test the functionality of the LDWS (e.g., ability to detect lane presence, and ability to detect an unintended lane departure), its ability to indicate LDWS engagement, its ability to indicate LDWS disengagement, and determine the point at which the LDWS notifies the Human Machine Interface (HMI) or vehicle control system that a lane departure event is detected. The HMI is not addressed herein, but is considered in SAE Standard J2808.
Standard

Trailer Grade Parking Performance Test Procedure

2018-11-12
CURRENT
J1452_201811
This SAE Recommended Practice establishes methods to determine grade parking performance with respect to: a Ability of the parking brake system to lock the braked wheels. b The trailer holding or sliding on the grade, fully loaded, or unloaded. c Applied manual effort. d Unburnished or burnished brake lining friction conditions. e Down and upgrade directions.
Standard

Trailer Axle Alignment

2011-06-13
CURRENT
J875_201106
The scope of this SAE Recommended Practice, trailer axle alignment, is to identify the dimensional limits of, and a method to, establish a perpendicular relationship between the king pin centerline and the axle centerline at its midpoint. Various types of equipment are commercially available which can be used for this measurement which provides varying degrees of accuracy, but none can be endorsed by SAE. The most fundamental methods of measurement will be described here, but other equipment is available if a greater degree of accuracy is desired.
Standard

Tire Chain Clearance - Trucks, Buses (Except Suburban, Intercity, and Transit Buses), and Combinations of Vehicles

2011-05-17
CURRENT
J683_201105
The purpose of this SAE Information Report is to set up a guide as to body, frame, and wheel housing clearance to accommodate tire chains, and also the minimum bogie spacing to permit using chains on both axles. These dimensions apply to trucks, buses, and combinations of vehicles 10 001 lb (4535.06 kg) GVW and over, and are based upon recommendations of the Tire and Rim Association and of the National Association of Chain Manufacturers. The diagram shows clearance for chains over the tire ONLY and allowance must be made for spring deflections in determining fender clearance. See Figure 1 and Table 1.
Standard

Three-Point Hitch, Implement Quick-Attaching Coupler, Agricultural Tractors

1996-07-01
CURRENT
J909_199607
This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers. It is intended to establish those dimensions which are necessary to assure adequate clearance between components and to assure proper functioning of the tractor-implement combination when the implement is attached to the tractor by means of quick-attaching coupler. Design of the latching mechanism and individual components of the coupler not restricted by this document are left to the discretion of the manufacturer.
Standard

Tests for Snowmobile Switching Devices and Components

2004-02-24
HISTORICAL
J68_200402
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
X