Refine Your Search

Date

Date

Topic

Topic

Metallurgy Magnesium alloys Screws Powder metallurgy Commercial Vehicle Standard

Search Results

Viewing 1 to 20 of 76
123Next >Last >>
Sort by title
Standard

Structural Testing of Passenger Car and Truck Disc Brakes
2014-11-15
CURRENT
J1713_201411
This SAE Recommended Practices specifies a procedure for determining structural strength and fatigue life of disc-brake caliper assemblies which are satisfactory for vehicle usage. It is applicable to new caliper assemblies which are employed in passenger car and truck brake systems utilizing hydraulic brake fluids. Brake design and vehicle performance requirements are not included. Specification limits are left to the discretion of the responsible manufacturer. This procedure was developed for base brake operation and does not consider some unusual effects of ABS (Anti-Lock-Brake System) or Traction Control systems which may have a significant effect on the caliper. Careful analysis of the particular type ABS and/or Traction Control should be made and additional tests may be required which are not included in this document.
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)
2008-04-14
HISTORICAL
J1119_200804
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)
2002-09-20
HISTORICAL
J1119_200209
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

Snowmobile Headlamps
2011-03-12
HISTORICAL
J280_201103
This standard provides test methods and requirements for snowmobile headlamps.
Standard

Snowmobile Headlamps
2021-05-13
HISTORICAL
J280_202105
This SAE Standard provides test methods, performance requirements, installation requirements, and guidelines for snowmobile headlamps.
Standard

Ship Systems and Equipment—Part Standard for Studs—Continuous and Double End (Metric)
2004-06-21
HISTORICAL
J2271M_200406
This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile).
Standard

Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric)
2015-08-27
CURRENT
J2271M_201508
This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile).
Standard

Ship Systems and Equipment - Fasteners - Selection and Identification Guidance
2021-12-01
CURRENT
J2280_202112
This SAE Standard provides a comprehensive list of guidelines for the selection, identification, and control of metric- and inch-sized fasteners for use in shipboard applications for both shipbuilder installed joints and for use in shipboard components. This guidance includes the following: a Fastener material selection. b Fastener thread form and fit selection. c Selection of fastener finish, when needed. d Selection of locking devices and elements, when needed. e Selection of screw thread fastener inserts, when needed. f Use of fastener part or identifying numbers. g Identification marking requirements.
Standard

Self-Propelled Sweepers Sweep-Ability Performance
2007-11-05
HISTORICAL
J1702_200711
This SAE Standard establishes a method of disclosing the sweep-ability performance of self-propelled sweepers that use broom means for sweeping and collection, together with either a mechanical- or pneumatic-conveyance system for the transfer of “sweepings” into a collection hopper.
Standard

Sealing Compound, Polythioether Rubber, Light-Cured, for Integral Fuel Tanks and General Purpose, Intermittent use to 360 °F (182 °C)
2022-04-25
CURRENT
AMS1389
This specification covers polythioether rubber fuel resistant sealing compounds, supplied as a two-component system, which cure rapidly when exposed to a cure on demand (CoD) light source used to initiate a reaction that generates crosslinking of sealant polymers. Type 2 compounds also cure at ambient conditions, without light exposure.
Standard

STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
1980-04-01
HISTORICAL
J1119_198004
The purpose of this information report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
1976-09-01
HISTORICAL
J1119_197609
The compositions and mechanical properties are only suggested to ensure good weldability and good formability in conjunction with control of mechanical properties. The particular design must be considered to ensure that the materials selected are compatible with the design. The indicated properties are intended to assure that the ROPS or FOPS will have meaningful resistance to brittle fracture. The impact toughness requirement is the conventional Charpy V Notch evaluation: it is primarily a quality control check and the indicated temperature does not directly relate to operating conditions. Three steel product categories are covered: hollow structural members, plates, bars and shapes, and castings.
Standard

SHIP SYSTEMS AND EQUIPMENT—THREADED FASTENERS—INSPECTION, TEST, AND INSTALLATION REQUIREMENTS
1996-01-01
HISTORICAL
J2270_199601
This SAE Standard covers both quality assurance and installation requirements for fasteners. This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity. This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.
Standard

SHIP SYSTEMS AND EQUIPMENT—FASTENERS—PART NUMBERS
1996-08-01
HISTORICAL
J2295_199608
This SAE Standard provides part numbers for the identification of fasteners for ship systems and equipment. This document lists some of the more common industry standards that have associated part numbering systems. In addition, this document provides part numbers for screws and nuts to American Society for Testing and Materials (ASTM) fastener standards covering materials most often used in ship systems and equipment.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION, INDUSTRIAL, AND FOREST MACHINERY
1987-05-01
HISTORICAL
J598_198705
This recommended practice applies to floodlamp, headlamp and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2) and forestry machines (4), as noted on SAE J1116. Construction and Industrial Machinery is normally operated off highways, therefore, this SAE Recommended Practice is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
123Next >Last >>
X