Search Results

The hazardous bulk chemical liquid cargo transportation is usually made through highways, using special automotive devices, named semitrailer tank, a kind of mobile tank specially developed to perform this task, manufactured with many types of steel, selected according to the chemical characteristics of the product to be transported. Equipment sizing is made based on specific standards which include specified formulas, loading, and safety factors representing the design criteria of this type of device. Despite of the detailed design criteria for semitrailer tank, it has been observed failure of some pieces of equipment during operation, in a shorter effective life than that one considered in the design phase itself. Considering a detailed study of the stress distribution in this type of equipment, this paper shows a verification of the possibility of yielding failure in the semitrailer tank structure.

This paper will discuss Concurrent Engineering as an emerging product development methodology. Specific emphasis will be placed on some of the key tools and considerations necessary for the success of Concurrent Engineering. In particular, the paper will discuss strategic product planning driven by customer requirements and how the product development effort will support the strategic product plan.

Work solenoids are widely used in household appliances. The environment and design of this type application does not lead to solenoids for the earthmoving industry. This paper presents the environmental effects to be considered when designing a solenoid for the earthmoving industry. It further explains the need for, and type of, test necessary to validate the design. Finally a review of production quality procedures, necessary to insure reliable production parts is discussed.

The development trend in construction machinery has been to produce equipment having a high level of reliability. The dollar loss that occurs when a major piece of equipment breaks down on the job is sufficiently great to justify the cost of providing reliable operation. In the development of the North the need for increased reliability is greater than ever. In extreme low temperature conditions as found on the NORTH SLOPE operation in Alaska, the harshness of the environment places additional stress both on the equipment and the operators. The development of winterization kits for construction and heavy engineering equipment to date has been slow, probably because of a comparatively small market and because the work could be postponed or accomplished by protecting the equipment and operator by temporary means to meet the purpose. The results have not been economical or as efficient as desired but efficient enough to be acceptable.

Abstract Windshield glare at night is a safety concern for all drivers. Public transit bus drivers also face another concern about glare caused by interior lighting sources originally designed for passenger safety. The extent to which interior light reflections contribute to glare is unknown. Unique methods for measuring discomfort and disability glare during bus driving were developed. An initial simulation study measured windshield luminance inside of a New Flyer D40LF diesel bus parked in a controlled, artificial, totally darkened test environment. Findings indicated significant disability glare (from elevated luminance) in the drivers’ primary field of view due to interior reflections. Any reduction in contrast would result in less prominent glare if actual driving conditions differ. To assess this, levels of windshield glare were also measured with the bus parked on the roadside under the “background glow” of the urban environment.

As an annual subscription, the Wiley Cyber Security Collection Add-On is available for purchase along with one or both of the following: Wiley Aerospace Collection Wiley Automotive Collection The titles from the Wiley Cyber Security Collection are included in the SAE MOBILUS® eBook Package. Titles: Network Forensics Penetration Testing Essentials Security in Fixed and Wireless Networks, 2nd Edition The Network Security Test Lab: A Step-by-Step Guide Risk Centric Threat Modeling: Process for Attack Simulation and Threat Analysis Applied Cryptography: Protocols, Algorithms and Source Code in C, 20th Anniversary Edition Computer Security Handbook, Set, 6th Edition Threat Modeling: Designing for Security Other available Wiley collections: Wiley SAE MOBILUS eBook Package Wiley Aerospace Collection Wiley Automotive Collection Wiley Computer Systems Collection Add-On (purchasable with the Wiley Aerospace Collection and/or the Wiley Automotive Collection)

Find out why you should attend the 2025 Noise and Vibration Conference and Exhibition.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.

Abstract Wheel chocks are rather simple compliant mechanisms for stabilizing vehicles at rest. However, chocks must be carefully designed given the complex interaction between the chock and the tire/suspension system. Despite their importance for safety, literature is surprisingly limited in terms of what makes a wheel chock efficient. Using simple but reliable quasi-static mechanical models, this study identifies mechanical requirements that help to avoid a number of failure modes associated with many existing wheel chocks. Given that chock grounding is not always possible, a chock’s maximum restraining capacity is only obtained when the wheel is completely supported by the chock. A generic chock profile is proposed to achieve this objective while mitigating undesirable failure modes. The profile is based on fundamental mechanical principles and no assumption is made on the load interaction between the chock and the wheel.

Explore what’s next in the world of mobility by discovering the latest standards, technical advancements, professional development and networking opportunities here

Welding has been used extensively in automotive components design due to its flexibility to be applied in manufacturing, high structural strength and low cost. To improve fuel economy and reduce material cost, weight reduction by optimized structural design has been a high priority in auto industry. In the majority of heavy duty vehicle's chassis components design, the ability to predict the mechanical performance of welded joints is the key to success of structural optimization. FEA (finite element analysis) has been used in the industry to analyze welded parts. However, mesh sensitivity and material properties have been major issues due to geometry irregularity, metallurgical degradation of the base material, and inherent residual stress associated with welded joints. An approach, equilibrium-equivalent structural stress method, led by Battelle and through several joint industrial projects (JIP), has been developed.

Front under run protection device (FUPD) is a regulatory requirement for passive safety of N2 & N3 category vehicle. This device gives effective protection for small vehicles (M1 or N1 category) against under running of big vehicles (N2 & N3 category) in the event of a frontal collision. FUPD generally consists of the front under run protector (FUP) and its mounting structure. As the compliance load target for N3 category is high, the FUP required achieving regulation target need to have high rigidity. This increases its size and hence the weight, Increase in weight has impact on payload and cost. To curtail the weight of FUP, in general Aluminum with higher strength is in use, but use of Aluminum increases the cost. So the main challenge in FUPD design is to achieve the design with optimal system weight & cost.

Nowadays, developing web (World Wide Web) engineering is considered to be a top priority task in many companies. A corporate web information center with broad coverage to support a company's worldwide engineering activities can make the product development and customer support more efficient. First, the archived, readily available product information, knowledge database, and user friendly engineering tools can ease up the more ever demanding engineering jobs. Second, the convenient information storage, retrieval systems and hyperlinks on the web should ensure effective communications among engineers, customers, and suppliers. However, without in-depth planning, the full benefits of web engineering cannot be realized. To be effective, other companion engineering programs must also be instated. This paper reviews the experience we have gained in utilizing web engineering for product development and customer support.

Wear characteristics of four bearing materials have been investigated under different sliding conditions. The bearing materials used were CDA 954, CDA 863, CDA 932, and CDA 938. Using a Taber Wear Tester, a cylinder on a flat geometry was used as a tribo contact pair. All bearing materials in the form of a thick cylindrical disk were subjected to combined sliding-rolling motion against a rotating flat disk. The flat disk was either an abrasive disk, or a very soft steel disk, or a hardened steel disk with and without lubrication. Wear was measured as weight loss after several thousand cycles of rotation. Maximum wear of the bearing materials occurred when the counter body was a very soft steel disk. These results together with the wear rate of each bearing material sliding against four different counter bodies are presented. These results are found to be of practical importance in the design and application of journal bearings made of materials used in this investigation.

This paper covers the development and features of a unique narrow aisle gas fork lift truck. It shows how three individually selective types of hydraulic circuits are utilized for a hydrostatic drive to power a rotatable front end - load assembly in a vehicle which is a new approach to narrow aisle stacking. The result is a lift truck which uses narrow aisles for storing material and retains the speed, utility, and endurance of conventional equipment.

Viziblezone Ltd.’s vehicle-to-pedestrian (V2P) solution to autonomous vehicles or “self-driving cars” is now capable of detecting pedestrians at distances of up to 150 meters (nearly 500 feet) – even when those pedestrians are standing behind objects that block line-of-sight.

Simulation of real time situations is a time tested software validation methodology in the automotive industry and array of simulation technologies have been in use for decades and is widely accepted and been part & parcel of software development cycle. While software that is being developed needs detailed plan, architecture and detailed design, it also matters during its development that, it is built in the right way from the very beginning and is fine tuned constantly. Especially for Software-In-Loop simulation (SIL), plenty of practices/tools/techniques/data are being used for simulation of system/software behavior. When it comes to choosing the right simulation technique and tools to be adopted, often there are discussions revolve around cost, feasibility, effectiveness, man-power, scalability, reusability etc.

The existing instrumentation of a soil bin was retrofitted with virtual instrumentation techniques to achieve improved repeatability and more precise measurements. Current-loop sensors were added to the prime mover for improved speed control. Soil preparation operations were instrumented to determine penetrometer forces as a function of soil penetration depth, soil surface smoothness, compaction force, and soil surface elevation. Test hitch-points for agricultural implements were instrumented with wheatstone bridge force transducers. Implement depth was found with ratiometric linear transducers. Distance and speed determinations utilized an optical encoder with a resolution of 3.0 × 10-4 m. Temperature measurements were also recorded with solid state current transducers.

In an accident reconstruction, vehicle speeds and positions are always of interest. When provided with scene photographs or fixed-location video surveillance footage of the crash itself, close-range photogrammetry methods can be useful in locating physical evidence and determining vehicle speeds and locations. Available 3D modeling software can be used to virtually match photographs or fixed-location video surveillance footage. Dash- or vehicle-mounted camera systems are increasingly being used in light vehicles, commercial vehicles and locomotives. Suppose video footage from a dash camera mounted to one of the vehicles involved in the accident is provided for an accident reconstruction but EDR data is unavailable for either of the vehicles involved. The literature to date describes using still photos to locate fixed objects, using video taken from stationary camera locations to determine the speed of moving objects or using video taken from a moving vehicle to locate fixed objects.