Search Results

United States construction equipment manufacturers are subject to a maze of product-oriented regulations in marketing their U.S.-built products in foreign countries. These same obstacles face their foreign-built products. In the past, these foreign regulations were more apt to be trade barriers to protect domestic markets than bonafide regulations to protect the users. These trade barriers are gradually being lifted because manufacturers in virtually all countries have now expanded beyond their domestic markets. Thus, the same manufacturers that formerly encouraged trade barriers must now cope with them. This expansion of markets now encourages the elimination of trade barriers and the harmonization of regulations. For the future, regulations will be retained and expanded. They will, however, be harmonized with international voluntary standards rather than having different regulations for each country.

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.

The paper discusses general winterization requirements for construction equipment used in the arctic at temperatures down to -55° Fahrenheit. The information is presented in a practical sense and was obtained from on-site experience around the North Slope of Alaska and Prudhoe Bay.

The development trend in construction machinery has been to produce equipment having a high level of reliability. The dollar loss that occurs when a major piece of equipment breaks down on the job is sufficiently great to justify the cost of providing reliable operation. In the development of the North the need for increased reliability is greater than ever. In extreme low temperature conditions as found on the NORTH SLOPE operation in Alaska, the harshness of the environment places additional stress both on the equipment and the operators. The development of winterization kits for construction and heavy engineering equipment to date has been slow, probably because of a comparatively small market and because the work could be postponed or accomplished by protecting the equipment and operator by temporary means to meet the purpose. The results have not been economical or as efficient as desired but efficient enough to be acceptable.

SINCE 1954 the CIMTC Subcommittee has been engaged in a program to meet military requirements through industry's production of construction equipment which can give satisfactory cold weather performance down to temperatures of −65 F. Individual contracts for three crawler tractors and one motor grader were negotiated by ERDL for these projects, and their performance is discussed. Industry participation was subsequently expanded to include engineering tests in the cold weather conditions of the Mesabi Iron Range. This joint report of the Winterization Sub-committee of the CIMTC and ERDL Winterization Section consists of separate papers by various members and consultants of this Sub-committee and ERDL personnel.

To investigate the feasibility of various test procedures to determine aerodynamic performance for the Phase 2 Greenhouse Gas (GHG) Regulations for Heavy-Duty Vehicles in the United States, the US Environmental Protection Agency commissioned, through Southwest Research Institute, constant-speed torque tests of several heavy-duty tractors matched to a conventional 53-foot dry-van trailer. Torque was measured at the transmission output shaft and, for most tests, also on each of the drive wheels. Air speed was measured onboard the vehicle, and wind conditions were measured using a weather station placed along the road side. Tests were performed on a rural road in Texas. Measuring wind-averaged drag from on-road tests has historically been a challenge. By collecting data in various wind conditions at multiple speeds over multiple days, a regression-based method was developed to estimate wind-averaged drag with a low precision error for multiple tractor-trailer combinations.

A 1:10-scale wind tunnel development program was undertaken by the National Research Council of Canada and Airshield Inc. in 1994 to develop trailer side skirts that would reduce the aerodynamic drag of single and tandem trailers. Additionally, a second wind tunnel program was performed by the NRC to evaluate the fuel-saving performance of boat-tail panels when used in conjunction with the skirt-equipped single and tandem trailers. Side skirts on tandem, 8.2-m-long trailers (all model dimensions converted to full scale) were found to reduce the wind-averaged drag coefficient at 105 km/h (65 mi/h) by 0.0758. The front pair of skirts alone produced 75% of the total drag reduction from both sets of skirts and the rear pair alone produced 40% of that from both pairs. The sum of the drag reductions from front and rear skirts separately was 115% of that when both sets were fitted, suggesting an interaction between both.

A wind tunnel experiment has been conducted to determine the changes in drag and side force due to the presence and position of cab extenders on a model of a commercial tractor-trailer truck. The geometric variables investigated are the cab extenders angle of incidence, the tractor-trailer spacing and the yaw angle of the vehicle. Three cab extender angles were tested-0°, 15° (out) and -15° (in) with respect to the side of the tractor. The cab and trailer models have the same width and height. The minimum drag coefficient was found for the tractor and trailer combination when the cab extenders were set to 0° angle of incidence with respect to the headwind. This result holds for all yaw angles with moderate gap spacing between the tractor and trailer. This study suggests that commercial tractor-trailer trucks can benefit from adjustable cab extender settings; 0° when using a trailer and -15° when no trailer is used.

The use of devices to reduce aerodynamic drag on large trailers and save fuel in long-haul, over-the-road freight operations has spurred innovation and prompted some trucking fleets to use them in combinations to achieve even greater gains in fuel-efficiency. This paper examines aerodynamic performance and potential drag reduction benefits of using trailer aerodynamic components in combinations based upon wind tunnel test data. Representations of SmartWay-verified trailer aerodynamic components were tested on a one-eighth scale model of a class 8 sleeper tractor and a fifty three foot, van trailer model. The open-jet wind tunnel employed a rolling floor to reduce floor boundary layer interference. The drag impacts of aerodynamic packages are evaluated for both van and refrigerated trailers. Additionally, the interactions between individual aerodynamic devices is investigated.

The trucking industry is being encouraged by environmental and cost factors to improve fuel efficiency. One factor that affects fuel efficiency is the aerodynamic design of the vehicles; that is, the vehicles with lower aerodynamic drag will get better mileage, reducing carbon emissions and reducing costs through lower fuel usage. A significant tool towards developing vehicles with lower drag is the wind tunnel. The automobile industry has made great improvements in fuel efficiency by using wind tunnels to determine the best designs to achieve lower drag. Those wind tunnels are not optimum for testing the larger, longer heavy trucks since the wind tunnels are smaller than needed. The estimated costs for a heavy truck wind tunnel based on automotive wind tunnel technology are quite high. A potential nozzle concept to reduce wind tunnel cost and several other new possible approaches to lower wind tunnel costs are presented.

This paper discusses the relationship between users of construction equipment and the manufacturers and dealers of the equipment The people involved in this relationship are the deciding factors in whether all participants are satisfied, as the people are responsible ultimately for the product The paper points out that the major qualities necessary in the considerations behind a user's satisfaction with a manufacturer's product are those belonging to people, ingenuity, improvement, and integrity. Examples are shown from the user's point of view of the need for these qualities, of which integrity is the most important.

Weight reduction in construction equipment is sought to achieve energy conservation and also to comply with the vehicle safety and compliance regulations, managing the weight distribution across the rear and the front end of the equipment to achieve the optimum balancing. Of late the thrust on product weight has increased along with reduced time to market, leading to increased usage of structural optimization methods. This has been further supported by the availability of high performance computing at relatively low cost. VOC and CTQ tools provided the motivation and initial screening of the design variables. The structural optimization software provides an integrated platform for analysis as well as optimization of components. In this work, an optimization tool has been used for size and shape optimization of a construction equipment assembly and a commercial FEA package was used for verification and validation of the results.

The environmental impact from herbicide utilization has been well documented in recent years. The reduction in weed control with out a viable alternative will likely result in decreased per acre production and thus higher unit production cost. The potential for selective herbicide application to reduce herbicide usage and yet maintain adequate weed control has generated significant interest in different forms of remote sensing of agricultural crops. This research evaluated the color co-occurrence texture analysis technique to determine its potential for utilization in crop groundcover identification. A program termed GCVIS (Ground Cover VISion) was developed to control an ATT TARGA 24 frame grabber; and generate HSI color features from the RGB format pixel data, HSI CCM matrices and the co-occurrence texture feature data.

This SAE Standard specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of walk-along self-propelled work machines with a mass greater than 115 kg. Service and parking brake systems are covered by this document.

This SAE Standard specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of walk-along self-propelled work machines with a mass greater than 115 kg. Service and parking brake systems are covered by this document.

This SAE Standard specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of walk-along self-propelled work machines with a mass greater than 115 kg. Service and parking brake systems are covered by this document.

This SAE Standard describes a procedure for the evaluation of operator seats which may be fitted to agricultural wheeled tractors per SAE J1150 and/or earthmoving machines per SAE J1057. This procedure evaluates only the vertical vibration performance and should not be considered a comprehensive seat evaluation procedure.

This paper discusses the off-road performance prediction of military application mini UGVs using terramechanics work deals with the development of performance simulation model for mini UGV in the Matlab/Simulink Software. Transient forward vehicle propulsion model and soil terrain interaction model have been built in the Simulink® software. It is a semi-empirical mobility model which predicts mini UGV performance on given terrain. The interaction between vehicle and the terrain causes resistances to vehicle propulsion. The model calculates these resistances, compares them to both the power limitations of the vehicle and the tractive limitations of the soil/terrain, to determine if the vehicle is immobilized. If not, then the vehicle speed is calculated based on available drawbar pull. The terrain is defined in terms of the soil parameters measured by the Bevameter. Semi-empirical equations suggested by Bekker have been used to model the soil terrain interaction.

This SAE Standard is intended to provide uniform requirements for the visibility and durability of vehicle identification numbers on snowmobiles.

The design complexity of today's vehicles places tougher demands on the electrical interconnection system, particularly within the engine compartment. This paper outlines three areas of product development specifically aimed at improving the performance of such systems. These are: ENVIRONMENTAL SEALING AND PROTECTION of multiple wire splices, wire bundles, and connectors. VEHICLE WIRING, with particular regard to high temperature resistance on critical components such as ABS systems. ELECTROMAGNETIC INTERFERENCE (EMI) PROTECTION via the use of shielded cables, and simple and reliable shield termination/splicing techniques. Together, these new materials and products combine to provide tougher, smaller, higher temperature resistance and environmentally sealed electrical interconnection systems.