Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

Yield Mapping with Digital Aerial Color Infrared (CIR) Images

1999-09-14
1999-01-2847
Yield potential was predicted and mapped for three corn fields in Central Illinois, using digital aerial color infrared images. Three methods, namely statistical (regression) modeling, genetic algorithm optimization and artificial neural networks, were used for developing yield models. Two image resolutions of 3 and 6 m/pixel were used for modeling. All the models were trained using July 31 image and tested using images from July 2 and August 31, all from 1998. Among the three models, artificial neural networks gave best performance, with a prediction error less than 30%. The statistical model resulted in prediction errors in the range of 23 to 54%. The lower resolution images resulted in better prediction accuracy compared to resolutions higher than or equal to the yield resolution. Images after pollination resulted in better accuracy compared to images before pollination.
SAE MOBILUS Subscription

Wiley SAE MOBILUS® eBook Package

2018-03-23
Committed to being the primary source for aerospace and ground vehicle engineering resources, SAE International has added the full compilation of our Wiley eBook collections to the SAE MOBILUS® technical resource platform. Purchasable as an annual subscription and containing the titles from the Wiley Aerospace Collection, the Wiley Automotive Collection, the Wiley Computer Systems Collection, and the Wiley Cyber Security Collection.
SAE MOBILUS Subscription

Wiley Automotive Collection

2018-03-23
Purchasable as an annual subscription, the Wiley Automotive Collection contains 20 eBook titles and focuses on a wide range of categories, including engines, transmission, chassis, body, electrical, safety, and manufacturing. Titles covering new and emerging topics such as battery technology and electric and hybrid vehicles are included as well, making the series an essential addition to any institution’s automotive resources.
Technical Paper

Why Not 125 BMEP in an L-Head Truck Engine?

1939-01-01
390130
HIGH output per cubic inch of piston displacement is desirable not alone for the purpose of being able to transport more payload faster, but more particularly for the invariably associated byproduct of lower specific fuel consumption, and especially at road-load requirements. The only way of accomplishing this purpose is through the use of higher compression ratios, and the limiting factors for this objective are fuel distribution and the operating temperatures of the component parts. A manifold is proposed which not only definitely improves distribution at both full and road loads, but has the inherent additional advantage of reducing the formation of condensate, thus still further facilitating a reduction in road-load specific fuel consumption. Hydraulic valve lifters, obviation of mechanical and thermal distortion, and controlled water flow are the essentials in improved cooling.
Technical Paper

Whole Body Vibration Levels: A Realistic Baseline for Standards

1976-02-01
760415
Statistical measures of whole-body vibration from ambulation are shown to be higher than those from operation of earthmoving machinery and significantly higher than published guidelines for human exposure to whole-body vibration. The inconsistency of human response to low level vibration of technological origin as compared to human imperceptiveness to high level vibration from ambulation is discussed.
Journal Article

Wheel Chock Key Design Elements and Geometrical Profile for Truck Vehicle Restraint

2018-06-06
Abstract Wheel chocks are rather simple compliant mechanisms for stabilizing vehicles at rest. However, chocks must be carefully designed given the complex interaction between the chock and the tire/suspension system. Despite their importance for safety, literature is surprisingly limited in terms of what makes a wheel chock efficient. Using simple but reliable quasi-static mechanical models, this study identifies mechanical requirements that help to avoid a number of failure modes associated with many existing wheel chocks. Given that chock grounding is not always possible, a chock’s maximum restraining capacity is only obtained when the wheel is completely supported by the chock. A generic chock profile is proposed to achieve this objective while mitigating undesirable failure modes. The profile is based on fundamental mechanical principles and no assumption is made on the load interaction between the chock and the wheel.
Technical Paper

What SPC Can Do for You

1986-09-01
861219
Quality improvement, widely accepted as the key to survival in today's global marketplace, can only be achieved through a disciplined approach to problem solving based on proven statistical process control (SPC) techniques. Improving quality also improves productivity, and SPC applications are generating substantial savings for both product and service organizations throughout industry.
Technical Paper

What Every Engineer Should Know About Finite Element Analysis Methods

1986-09-08
861294
The scope of Finite Element Analysis in the Product Development Cycle is given. A brief review of the development process is given. A brief description of the analysis method is presented. A description of how it works, how is it implemented, and where do I use it are included. The entire range of questions are answered through, how do I train for it, how do I manage it, along with what are the limitations and what are the benefits of this analysis method.
Technical Paper

Weld Durability Analysis by Equilibrium-Equivalent Structural Stress Approach

2006-10-31
2006-01-3576
Welding has been used extensively in automotive components design due to its flexibility to be applied in manufacturing, high structural strength and low cost. To improve fuel economy and reduce material cost, weight reduction by optimized structural design has been a high priority in auto industry. In the majority of heavy duty vehicle's chassis components design, the ability to predict the mechanical performance of welded joints is the key to success of structural optimization. FEA (finite element analysis) has been used in the industry to analyze welded parts. However, mesh sensitivity and material properties have been major issues due to geometry irregularity, metallurgical degradation of the base material, and inherent residual stress associated with welded joints. An approach, equilibrium-equivalent structural stress method, led by Battelle and through several joint industrial projects (JIP), has been developed.
Training / Education

Weibull-Log Normal Analysis Workshop

2019-12-09
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
Technical Paper

Wear Generation in Hydraulic Pumps

1990-09-01
901679
This paper is concerned with the synergistic effects of pump wear modes. The objective is to investigate the wear produced by cavitation, adhesion, abrasion, and corrosion and to verify a proposed model of the synergistic pump wear process. The approach followed includes identification of the combined effects of different wear modes (synergisms) in a pump and the development of a synergistic wear model that includes pump operating and environmental conditions as trigger factors of wear modes. An experimental program was designed to evaluate the cavitation, adhesion, and corrosion wear effects in conjunction with the abrasive wear produced in a pump by measuring wear debris, particle size and gravimetric levels of fluid. The generation of wear was traced to different pump locations. The results obtained here suggest that improved pump design and longer pump service life can be obtained when synergisms between failure modes are properly understood.
Technical Paper

Ways to Meet Future Emission Regulations for Agricultural Tractor Engines

2001-01-10
2001-26-0007
After a review of current and future emission legislation for non-road engines (India, Europe, USA), the various options available to reduce the emissions of diesel tractor engines are discussed. Special emphasis is put on naturally aspirated engines in the 37 - 50 kW power range. AVL has recently designed and developed several naturally aspirated heavy-duty diesel tractor engines to comply with current exhaust emissions standards for the Indian domestic and the US markets (EPA Tier 2). In doing so, different levels of technologies were applied. Their impact on mean effective pressure, specific fuel consumption and emissions will be shown. The future non-road engine exhaust emissions legislation in different markets will be addressed (India, Europe and USA). Compliance with the new emission standards will require the introduction of more advanced technology.
Journal Article

Waste Heat Recovery: The Next Challenge for Commercial Vehicle Thermomanagement

2012-04-16
2012-01-1205
A significant driver for the development of future commercial vehicles is likely to be the introduction of fuel consumption related legislation in various regions around the world. The application of a waste heat recovery system to the powertrain of such vehicles is seen as a possible step, amongst many, to help them achieve the required fuel economy. In particular, the Rankine Cycle (a closed steam cycle) is often proposed as a potential means for deriving work from the engine exhaust heat. Rankine Cycle systems are already in use in off-highway applications, such as stationary engines or marine power-packs. However, the technical and commercial viability of these systems for on-highway, principally long haul truck application is as yet unproven. Aspects such as the in-use economy benefits, the system performance density, the component robustness and all interactions with the other vehicle systems have to be evaluated.
Technical Paper

Waste Heat Recovery on a Diesel-Electric Hybrid Bus Using a Turbogenerator

2012-09-24
2012-01-1945
An increase in global oil consumption, coupled with a peak in oil production, has seen the price of fuel escalate in recent years, and consequently the transport sector must take measures to reduce fuel consumption in vehicles. Similarly, ever-tightening emissions legislation is forcing automotive manufacturers to invest in technology to reduce toxic emissions. In response to these concerns, this project aims to address one of the fundamental issues with the Internal Combustion Engine - approximately one third of the fuel energy supplied to the engine is lost as heat through the exhaust system. The specific aim of this project is to reduce the fuel consumption of a diesel-electric hybrid bus by recovering some of this waste heat and converting it to useful power. This report details how turbocompounding can be applied to the engine, via the inclusion of a turbogenerator, and assesses its waste heat recovery performance.
Journal Article

Waste Heat Recovery for Light-Duty Truck Application Using ThermoAcoustic Converter Technology

2017-03-28
2017-01-0153
Nearly a third of the fuel energy is wasted through the exhaust of a vehicle. An efficient waste heat recovery process will undoubtedly lead to improved fuel efficiency and reduced greenhouse gas (GHG) emissions. Currently, there are multiple waste heat recovery technologies that are being investigated in the auto industry. One innovative waste heat recovery approach uses Thermoacoustic Converter (TAC) technology. Thermoacoustics is the field of physics related to the interaction of acoustic waves (sonic power) with heat flows. As in a heat engine, the TAC produces electric power where a temperature differential exists, which can be generated with engine exhaust (hot side) and coolant (cold side). Essentially, the TAC converts exhaust waste heat into electricity in two steps: 1) the exhaust waste heat is converted to acoustic energy (mechanical) and 2) the acoustic energy is converted to electrical energy.
Technical Paper

Virtual Validation of Truck Chassis Using Wheel Force Transducer Data

2019-01-09
2019-26-0332
Lot of CAE (Computer Aided Engineering) based evaluation methods and DVPs (Design Verification Process) are available which are derived from acceleration data, strain data acquired on vehicle over proving ground. Using peak load summary from acceleration inputs generic gravity loads get derived. Use of these loads for CAE analysis are having certain advantages like faster concept level evaluation, broader perspective and confidence on concept design. But there are few limitations of using these methods like it gives only broader perspective of concept design and not able to capture many failure modes and locations as per RWUP (Real World Usage Pattern). This paper explains the advantages of using WFT (Wheel Force Transducer) data for getting more reliable, realistic and co-relating more failure modes on the vehicle. WFT data acquired on all four wheel-ends at wheel center. Each wheel end transducer records 3 translational and 3 rotational forces.
Technical Paper

Virtual Test of Manufacturing Process Effect on Injector Design

2015-09-29
2015-01-2794
Diesel exhaust after treatment solutions using injection, such as urea-based SCR and lean NOx trap systems, effectively reduce the emission NOx level in various light vehicles, commercial vehicles, and industrial applications. The performance of the injector is crucial for successfully utilizing this type of technology, and a simulation tool plays an important role in the virtual design, that the performance of the injector is evaluated to reach the optimized design. The virtual test methodology using CFD to capture the fluid dynamics of the injector internal flow has been previously developed and validated for quantifying the dosing rate of the test injector. In this study, the capability of the virtual test methodology was extended to determine the spray angle of the test injector, and the effect of the manufacturing process on the injector internal nozzle flow characteristics was investigated using the enhanced virtual test methodology.
Technical Paper

Virtual Test of Injector Design Using CFD

2014-09-30
2014-01-2351
Diesel exhaust aftertreatment solutions using injection, such as urea-based SCR and lean NOx trap systems, effectively reduce the emission NOx level in various light vehicles, commercial vehicles, and industrial applications. The performance of the injector plays an important role in successfully utilizing this type of technology, and the CFD tool provides not only a time and cost-saving, but also a reliable solution for extensively design iterations for optimizing the injector internal nozzle flow design. Inspired by this fact, a virtual test methodology on injector dosing rate utilizing CFD was proposed for the design process of injector internal nozzle flows.
Technical Paper

Virtual Durability Analysis of Heavy Commercial Truck Cabin for Proving Ground Inputs

2013-11-27
2013-01-2788
The objective of this work is to find cumulative fatigue damage of the truck cabin caused by proving ground data. Stresses in the cabin are derived by finite element analysis using inertia relief method. Multi body simulation software ADAMS was used to obtain the load history at cabin attachment points using measured proving ground data as input. The fatigue damage of the truck cabin was estimated by linear super position method with static results and load history. The calculated numerical fatigue damage results were compared with physical test results and correlated.
Journal Article

Virtual Cylinder Pressure Sensor for Transient Operation in Heavy-Duty Engines

2015-04-14
2015-01-0872
Cylinder pressure-based combustion control is widely introduced for passenger cars. Benefits include enhanced emission robustness to fuel quality variation, reduced fuel consumption due to more accurate (multi-pulse) fuel injection, and minimized after treatment size. In addition, it enables the introduction of advanced, high-efficient combustion concepts. The application in truck engines is foreseen, but challenges need to be overcome related to durability, increased system costs, and impact on the cylinder head. In this paper, a new single cylinder pressure sensor concept for heavy-duty Diesel engines is presented. Compared to previous studies, this work focuses on heavy-duty Diesel powertrains, which are characterized by a relatively flexible crank shaft in contrast to the existing passenger car applications.
X