Search Results

Standard

Standard Contaminant for Testing Aerospace Cleaners

2020-07-14

CURRENT

AMS7201

This specification establishes requirements for a standard contaminant that can be used to represent typical soils encountered in aerospace cleaning. This standard contaminant consists of materials that are common contaminants found in aircraft maintenance depots and manufacturing facilities.

Standard

Sealing of Integral Fuel Tanks

2016-11-23

HISTORICAL

AIR4069C

This SAE Aerospace Information Report (AIR) presents preferred design, assembly, and repair practices for sealing of aircraft integral fuel tanks, including rework of applied fuel tank seals. It addresses engineering designs for integral fuel tanks as they are currently found in practice; and discusses the most practical and conservative methods for producing a reliable, sealed system. Although this AIR presents practices for sealing of integral fuel tanks, the practices presented within this report are practices that are carried throughout sealing that include both pressure and environmental aircraft sealing. Design preferences for optimum sealing are not within the scope of this document. Such discussions can be found in the United States Air Force (USAF) sponsored report, entitled Aircraft Integral Fuel Tank Design Handbook, AFWAL-TR-87-3078.

Standard

Sealing of Integral Fuel Tanks

2010-01-14

HISTORICAL

AIR4069B

This SAE Aerospace Information Report (AIR) presents preferred practices for sealing of aircraft integral fuel tanks, including rework of applied fuel tank seals. It addresses engineering designs for integral fuel tanks as they are currently found in practice; and discusses the most practical and conservative methods for producing a reliable, sealed system. Although this AIR presents practices for sealing of integral fuel tanks, the practices presented within this report are practices that are carried throughout sealing that include both pressure and environmental aircraft sealing. Design preferences for optimum sealing are not within the scope of this document. Such discussions can be found in the Air Force sponsored report, entitled Aircraft Integral Fuel Tank Design Handbook, AFWAL-TR-87-3078.

Standard

Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose

2008-01-03

HISTORICAL

AMS3278A

This specification covers polyurethane (PUR) in the form of two-component sealing compounds.

Standard

Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose

2016-10-24

HISTORICAL

AMS3278B

This specification covers polyurethane (PUR) in the form of two-component sealing compounds.

Standard

Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant

2010-08-18

HISTORICAL

AMS3255A

This specification establishes the requirements for an expanded polytetrafluoroethylene (EPTFE) in the form of sealing tape, gaskets, or sheets requiring no mixing or curing.

Standard

Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant

2017-07-17

CURRENT

AMS3255B

This specification establishes the requirements for an expanded polytetrafluoroethylene (EPTFE) in the form of sealing tape, gaskets, or sheets requiring no mixing or curing.

Standard

Sealing Tape, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant

2000-08-01

HISTORICAL

AMS3255

This specification establishes the requirements for an expanded polytetrafluoroethylene (EPTFE) in the form of sealing tape requiring no curing.

Standard

Sealing Compound, Topcoat, Fuel Tank, Buna-N Type

2021-06-29

CURRENT

ARD50102

This specification covers one type of one-component, air-drying protective coating which cures at room temperature.

Standard

Sealing Compound, Topcoat, Fuel Tank, Buna-N Type

2021-06-29

CURRENT

AMSS4383C

This specification covers one type of one-component, air-drying protective coating which cures at room temperature.

Standard

Sealing Compound, Topcoat, Fuel Tank Buna-N Type

2015-07-08

HISTORICAL

AMSS4383B

This specification covers one type of one-component, air drying protective coating which cures at room temperature. The topcoat compound covered by this specification shall be formulated from butadiene acrylonitrile copolymer and shall be colored red by the use of an oil soluble dye.

Standard

Sealing Compound, Topcoat, Fuel Tank Buna-N Type

2010-07-13

HISTORICAL

AMSS4383A

This specification covers one type of one-component, air drying protective coating which cures at room temperature. The topcoat compound covered by this specification shall be formulated from butadiene acrylonitrile copolymer and shall be colored red by the use of an oil soluble dye.

Standard

Sealing Compound, Thread and Gasket, Fuel, Oil, and Water Resistant

2001-05-01

HISTORICAL

AMSS7916A

This specification establishes the requirements for sealing compounds used on threads and gaskets.

Standard

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

2022-11-02

CURRENT

AMS3266B

This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.

Standard

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

2017-02-23

HISTORICAL

AMS3266A

This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.

Standard

Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels

2018-07-23

HISTORICAL

AMS3379

This specification establishes the requirements for a polysulfide sealing compound in putty consistency to be used for form-in-place sealing of removable doors, skins, and panels.

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)

2008-03-26

HISTORICAL

AMS3281D

This specification covers three types and three classes of fuel-resistant polysulfide (T) sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)

2010-12-02

HISTORICAL

AMS3281E

This specification covers three types and three classes of fuel-resistant polysulfide (T) sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)

2016-03-08

HISTORICAL

AMS3281F

This specification covers three types and three classes of fuel-resistant polysulfide sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)

2022-06-13

CURRENT

AMS3281G

This specification covers three types and three classes of fuel-resistant polysulfide sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.