Search Results

While the request of diesel engine is recently increased due to its excellent fuel economy benefit, the regulation of emission becomes reinforced. The variety of method such as engine technologies and aftertreatment systems have been developed and applied to meet the criteria of regulation so far. One of recognizable technologies utilized in a heavy commercial vehicle is SCR system using urea solution as a reductant, which eliminates NOx. This paper includes the experiment of a diesel engine equipped with Urea SCR system, and its emission characteristic including particle is analyzed and evaluated against its regulation. This evaluation is performed for the diesel engine using ELPI(Electric Low Pressure Impactor) under the condition of constant engine RPM and load, and injecting urea solution to SCR system, particle number distribution of particle range from 7nm to 10μm was estimated.

Electromagnetic valve (EMV) actuation system is a new technology for the improvement of fuel efficiency and the reduction of emissions in SI engines. It can provide more flexibility in valve event control compared to conventional variable valve actuation devices. However, a more powerful and efficient actuator design is needed for this technology to be applied in mass production engines. This paper presents the effects of design and operating parameters on the thermal, static and dynamic performances of the actuator. The finite element method (FEM) and computer simulation models are used in predicting the solenoid forces, dynamic characteristics and thermal characteristics of the actuator. Effect of design parameters and operating environment on the actuator performance were verified before making prototypes using the analytical models. To verify the accuracy of the simulation model, experimental study is also carried out on a prototype actuator.

On-board diagnostics (OBD) of diesel vehicles require various sensors to detect system malfunctions. The Particulate Matter (PM) sensor is one of OBD devices which gather information which could be critical in determining a crack in the diesel particulate filters (DPFs). The PM sensor detects PM which penetrates cracked DPFs and converts the amount of PM into electrical values. The PM sensor control unit (SCU) receives those analog signals and converts them to digital values through hardware and software solutions. A capacitive sensing method would be a stable solution because it detects not raw analog signals but electrical charges or a time constant going through the capacitive load. Therefore, amount of PM would be converted reasonable value of capacitance even though there is a little amount of PM.

In this study a new model is proposed for turbulent premixed combustion in a spark-ignition engine. An independent transport equation is solved for the mean reaction progress variable in a propagation form in KIVA-3V. An expression for turbulent burning velocity was previously given as a product of turbulent diffusivity in unburned gas, laminar flame speed and maximum flame surface density. The model has similarity with the G equation approach, but originates from zone conditionally averaged formulation for unburned gas. A spark kernel grows initially as a laminar flame and becomes a fully developed turbulent flame brush according to a transition criterion in terms of the kernel size and the integral length scale. Simulation of a homogeneous charge pancake chamber engine showed good agreement with measured flame propagation and pressure trace. The model was also applied against experimental data of Hyundai θ-2.0L SI engine.

A study for improving the resistance to fretting corrosion of SCr 420 pinion gear was conducted. Fretting is the damage to contacting surfaces experiencing slight relative reciprocating sliding motion of low amplitude. Fretting corrosion is the fretting damage to unlubricated contacting surfaces accompanied by corrosion, mostly oxidation that occurs if the fretting occurs in air. Two kinds of conventional heat treatment and a newly designed one suggested for improving the resistance to the fretting corrosion of pinion gear were compared each other to find out what is the main factor for generating fretting corrosion phenomenon. Increased carbon potential at both the heating and diffusing zone and reduced time of tempering was found out to be a solution for improving the resistance to fretting corrosion of forged and heat treated gear steel. On the contrary, modified carbo-nitriding using ammonia gas has been getting worse the fretting corrosion problem.

The engine indicated torque is not delivered entirely to the wheels, because it is lowered by losses, such as the pumping, mechanical friction and front auxiliary power consumption. The front auxiliary belt drive system is a big power consumer-fueling and operating the various accessory devices, such as air conditioning compressor, electric alternator, and power steering pump. The standard fuel economy test does not consider the auxiliary driving torque when it is activated during the actual driving condition and it is considered a five-cycle correction factor only. Therefore, research on improving the front end auxiliary drive (FEAD) system is still relevant in the immediate future, particularly regarding the air conditioning compressor and the electric alternator. An exertion to minimize the auxiliary loss is much smaller than the sustained effort required to reduce engine friction loss.

In the view point of driving safety, the crosswind sensitivity of a vehicle becomes more important, as the driving speed in highway gets higher in these days. The sensitivity of a vehicle to crosswind depends on many factors, including the design of the suspension and aerodynamics of the body, etc. However, the knowledge about this phenomenon has still to be improved, in order to develop vehicle with optimum characteristics for crosswind stability. In this research, the physics behind the sensitivity of a vehicle is discussed in detail through various kinds of virtual test using computer aided engineering (CAE) simulation scheme. In the first, a reliable simulation model for vehicle, driver, wind generator and interactions among them is built. This simulation model is verified by comparison with test results of real vehicle. Then, the sensitivity analysis is carried out to find out the most influential design parameters.

We used a one-dimensional monolithic catalyst model to predict the transient thermal and conversion characteristics of a dual monolithic catalytic converter with a Palladium only (Pd-only) catalyst and a Palladium/Rhodium (Pd/Rh) catalyst. Prior to the numerical investigation of the dual-catalyst converter, we modified the pre-exponential factor and activation energy of each reaction for both catalysts to achieve acceptable agreement with experimental data under typical operating conditions of automobile applications. We validated the conversion behavior of the lumped parameter model for each catalyst against different engine operating conditions. Two higher cell density substrates, Pd-only catalyst (600cpsi/3.9mil) and Pd/Rh catalyst (600cpsi/4mil), for faster light-off and improved warm-up performance are used in this study and the two monoliths has been connected without the space between monoliths.

Although several techniques of avoiding the moan noise are recently developed, analysis and design modifications are dependent on the case study and not systematic. In this study, the induced moan noise is analyzed in the coupled torsional beam axle (CTBA) suspension module with a proposed processing technique that lead to a reliable solution to prevent the moan noise. The signal of the moan noise is measured throughout the vehicle test considering the external conditions. The measured signal is analyzed its spectral characteristics with using a wavelet technique and two major spectra of the moan noise which is invisible only with FFT is successfully detected. Also a novel contribution analysis that is based on the frequency response function (FRF) is proposed to determine which component is more contributive for passing through the moan noise in the CTBA suspension module.

To meet the long life expectancy and durability of the constant velocity joint (CVJ) boots an analytical study for CVJ boots using new material Thermoplastic Elastomer(hereafter TPEE) has been carried out in the paper. TPEE is known to be the new thermoplastic elastomer material featuring superior mechanical and chemical properties compared to the conventional chloroprene rubber. The deformation and contact characteristics of TPEE CVJ boots under the actual applied load conditions were analyzed through finite element method in the paper. The study has shown that the behavior of deformation and contact characteristics of TPEE CVJ boots under load can be modeled and predicted analytically. Also the study has shown that durability of the boots can be obtained by choosing the proper contraction ratio and thickness in the boots design.

Biodegradable headlinings were developed using jute fiber, PLA (polylactic acid) fiber. More specifically, the main felt which consists of jute fibers and PLA fibers was produced by carding process, and then laminating PLA Films or light PLA felts as reinforcement. After lamination, cotton nonwovens were used as skin layers. Evaluation on the biodegradation of headlinings was tested under conditions (KS M 3100-1 and ISO-14855-1) of aerobic biodegradation. The test results of biodegradable headlinings showed a reduction of weight by 48 % and a decrease of mechanical strength by 90% for the biodegradation period. This feature would be attributed to the decomposition of the bio-materials during its biodegradation.

Electric vehicles are rapidly increasing in the global market. Most electric vehicles have adopted a single-speed gearbox, which is a double reduction gear set. Although the traction motor of an electric vehicle has a wide rotational speed range, the single-speed gearbox has the disadvantages of lowering the efficiency of the motor operating region and limiting the maximum vehicle speed. To overcome the shortcomings of the single-speed gearbox, it is necessary to apply a 2-speed transmission to electric vehicles. Based on the patent of system configuration, a unique 2-speed transmission with a planetary gear set and two synchronizers set developed and applied to electric vehicle. The advantage of this 2-speed transmission is that traction force increases by more than 40% at first gear and top speed increases by more than 30% at second gear. The system configuration was designed with the idea of making compact, efficient and cost-effective product.

As a part of the global efforts to reduce CO2 emission, studies are in progress to derive regulation measures for CO2 emission from heavy-duty vehicles. Thus, identification of emission characteristics of CO2 for heavy-duty vehicle is required and test driving cycle for this would be necessary. Before developing a test driving cycle to identify the emission characteristics of CO2, selection of test subject vehicles and actual road test was carried out. Through this, road drive characteristics per diverse vehicle type and emission levels of CO2 were identified. Correlations between the currently used cycles of each country and the actual road were analyzed and the cycle most similar to the actual road situations was selected among various countries' cycles to verify whether its easy use was possible for the actual tests. The test driving cycle selected after comparison with actual road situations was modified so as to enable actual tests for all heavy-duty vehicles.

The strict new emission regulations have resulted in the development of new techniques to meet the control of cold-start emission in various competitive ways. In this study, the dual walled air gap exhaust pipe system is developed as an effective countermeasure to reduce pollutant exhaust gas emission, particularly to reduce pollutant exhaust gas emission at cold start and idling stage, in which the catalytic converter has not reached to light-off temperature. In this study, it is shown that dual walled air gap exhaust system can shorten the time to reach to light off temperature of the catalytic converter in cold start state, and reduce the emission of Hydrocarbon (HC) significantly due to its low thermal capacity and high thermal insulation effect. In the study, a thermal analysis of the dual walled air gap exhaust pipe system has been done using the computational fluid dynamics method.

An on-board monitoring system for an automobile emission gas has developed using porous ceramic sensor to apply in automotive. We have performed model experiment using similarity and engine dynamometer experiment. By the model experiment, output signal of HC sensor is followed with amount of hydrocarbon in the mixed gas under high temperature range. A single hydrocarbon sensor exposed to the exhaust gas in the chamber to render a signal responsive to the hydrocarbon. The HC sensor in test chamber checked the conductive ions in emission gas. A preferred application includes hydrocarbons in an automotive exhaust gas stream by exposing a porous alumina (Al2O3) ceramic based sensor to the same exhaust gas stream. By combining the electrical signal, a measure of hydrocarbons can be provided. By the developed temperature mode test and the load mode test for engine dynamometer experiment, we have confirmed a possibility of catalyst monitoring used HC sensor in the engine dynamometer.

Main role of fuel rail for GDI (Gasoline Direct Injection) system is to store and distribute gasoline between high pressure pump and injector. Under the engine operating condition, fuel pressure and ambient temperature are applied to fuel rail as fatigue load, which can cause fatigue failure. To meet current a global environmental regulation, a fuel injection pressure is gradually increasing. Therefore a fuel rail for GDI engine which is installed between fuel pump and injector must be stronger than now. Also the target reliability of the fuel rail has to be increased than before. Accordingly, fatigue behaviors of fuel rail must be analyzed and expected at the development stage. In this study, a procedure for assessment the fatigue life of GDI fuel rail was developed. With this, fatigue load on the GDI fuel rail can be expected under actual vehicle operating conditions. Furthermore, fatigue life of a part can be verified based on the expected fatigue load.

Studies of driving cycles for buses have been published in a number of papers, e.g., the Central Business District (CBD) and New York Bus (NY Bus) driving cycles. Such studies, however, cannot represent the actual driving environment of Seoul because of differences in road conditions and the volume of traffic. Thus, this study presents the development of a driving cycle for the city bus system of Seoul, the capital city of Korea. A representative route is selected by means of a statistical analysis of the city bus routes in Seoul. Experiments are performed to measure velocity, road grade, engine speed, load conditions, gear-shift patterns, and vehicle acceleration in actual Seoul traffic. A simulation model is developed to evaluate a driving cycle on the basis of the measured data obtained. The coupling effect between velocity and acceleration is analyzed, as well as the coupling effect between road grade and vehicle acceleration.

The auxiliary brake in a commercial vehicle is used to prevent the main brake from rupturing or not working by overheating. Contactless electronic brakes are developed as auxiliary brakes, and current-utilization increases the control accuracy. However, continuous charges and discharges of a battery due to the use of large amounts of current would shorten the battery life and could decrease the braking efficiency of a contactless brake. This paper proposes a method to utilize the braking torque efficiently when an alternator creates a current by using diodes to distinguish the currents of a battery and an alternator and to extend the battery life by decreasing the number of charges and discharges of a battery. By implementing the controller and making the test bed, discharge of a battery has been prevented and stable operation of the electronic brake has been made.

To properly respond to demands to reduce national energy consumption and meet greenhouse gas emission targets based on environment policy, the Ministry of Trade, Industry, and Energy of Korea formed a research consortium consisting of government agencies and academic and research institutions to establish the first fuel efficiency standards for medium- and heavy-duty (MHD) commercial vehicles. The standards are expected to be introduced in 2017 as Phase 1 of the plan and will regulate trucks with a gross vehicle weight in excess of 3.5 tons and buses with a carrying capacity of more than 16 persons. Most MHD commercial vehicles are custom-made and manufactured in diversified small-quantity batch production systems for commercial or public use, resulting in difficulties in utilizing mandatory vehicle tests for fuel efficiency evaluations.

A preliminary study was conducted to develop an automotive thermal energy storage unit for reduction in emissions and for increase in occupants comfort in winter. To prevent thermal storage performance degradation of the thermal storage media some additives were mixed with the base material Bariumhydroxide-octahydrated(Ba(OH)2·8H2O), and offers promising degradation-resist characteristics. The thermal energy storage unit was then optimally designed based on parameter study and empirical analysis. A comparison was made with a commercially available heat battery. Peak power of the developed thermal energy storage unit was about three times higher than that of the existing one.