Search Results

OEM and Tier One integrated suppliers are in constant search of cockpit system components that reduce the overall number of breaks across smooth surfaces. Traditionally, soft instrument panels with seamless airbag systems have required a separate airbag door and a tether or steel hinge mechanism to secure the door during a deployment. In addition, a scoring operation is necessary to ensure predictable, repeatable deployment characteristics. The purpose of this paper is to demonstrate the development and performance of a cost-effective soft instrument panel with a seamless airbag door that results in a reduced number of parts and a highly efficient manufacturing process. Because of the unique characteristics of this material, a cost-effective, lightweight solution to meet both styling requirements, as well as safety and performance criteria, can be attained.

Electrostatic painting of exterior body components is considered standard practice in the automotive industry. The trend toward the use of electrostatic painting processes has been driven primarily because of environmental legislation and material system cost reduction efforts. When electrostatically painting thermoplastic body panels, side by side with sheet metal parts, it is imperative that the thermoplastic parts paint like steel. Electrostatic painting of thermoplastics has traditionally required the use of a conductive primer, prior to basecoat and clearcoat application. The use of conductive plastics eliminates the need for this priming step, while improving paint transfer efficiency and first pass yield. These elements provide an obvious savings in material and labor. The most significant benefit, is the positive environmental impact that occurs through the reduction in the emission of volatile organic compounds (VOC's).

Over the last decade, on small- and medium-size passenger cars, a new class of front bumper - injection or blow molded from engineering thermoplastics - has been put into production use. These bumper systems provide full 8-km/hr federal pendulum and flat-barrier impact protection, as well as angled barrier protection. Thermoplastic bumpers, offering weight, cost, and manufacturing advantages over conventional steel bumper systems, also provide high surface finish and styling enhancements. However, there remain questions about the durability and engineering applicability of thermoplastic bumper systems to heavier vehicles. This paper presents results of a preliminary study that examines the durability of thermoplastic bumpers drawn from production lots for much lighter compact, and mid-size passenger cars against baseline steel bumper systems currently used on full-size pickup truck and sport-utility vehicles (SUVs). Bumpers were subjected to U.S.

This paper describes a bumper system designed to meet the current FMVSS (Federal Motor Vehicle Safety Standard) and ECE42 legislation as well as the European Enhanced Vehicle Safety Committee (EEVC) requirements for lower leg pedestrian impact protection [1] (The EEVC was founded in 1970 in response to the US Department of Transportation's initiative for an international program on Experimental Safety Vehicles. The EEVC steering committee, consisting of representatives from several European Nations, initiates research work in a number of automotive working areas. These research tasks are carried out by a number of specialist Working Groups who operate for over a period of several years giving advice to the Steering Committee who then, in collaboration with other governmental bodies, recommends future courses of action designed to lead to improved safety in vehicles).

This paper will discuss, compare, and contrast current materials, designs, and manufacturing options for fuel filler doors. Also, it will explore the advantages of using conductive thermoplastic substrates over other materials that are commonly used in the fuel filler door market today. At the outset, the paper will discuss the differences between traditional steel fuel filler doors, which use an on-line painting process, and fuel filler doors that use a conductive thermoplastic substrate and require an in-line or off-line painting process. After reviewing the process, this paper will discuss material options and current technology. Here, we will highlight key drivers to thermoplastics acceptance, and look at the cost saving opportunities presented by the inline paint process option using a conductive thermoplastic resin, as well as benefits gained in quality control, component storage and coordination.

This paper will address several critical aspects of bumper system performance, including vehicle damage protection and crash-severity sensing considerations, energy-absorption capacity and efficiency, and low-speed impact consistency and sensitivity to temperature changes. The objective is to help engineers and designers establish a realistic perspective of the capability of the various technologies based on actual test performance. The scope of the evaluation will include a comparison of several bumper-beam material constructions when subjected to a 16-km/hr swinging barrier impact over a range of temperatures the bumper could see in service (-30 to 60C).

Traditional knee bolster designs consist of a first-surface plastic component covered by paint or vinyl skin and foam, with a subsurface steel plate that transfers knee loads to 2 steel crush brackets. The design was developed to meet FMVSS 208 and OEM requirements. More recently, technological developments have allowed for the steel plate to be replaced by a ribbed plastic structure, which offers cost and weight savings to the instrument panel system. However, it is still a hybrid system that combines plastic with the 2 steel crush brackets. This paper will detail the development of an all-plastic design, which consolidates the plastic ribbed reinforcement plate with the 2 steel crush cans in a single engineering thermoplastic component. The new system is expected to offer further cost and weight savings.

A new front bumper, blow molded from an engineering thermoplastic, is being used to provide full 8 km/h federal pendulum and flat-barrier impact protection, as well as angled barrier protection on a small passenger car. The low intrusion bumper is compatible with the vehicle's single-sensor airbag system and offers a 5.8 kg mass savings compared with competitive steel/foam systems. This paper will describe the design and development of the bumper system and the results achieved during testing.

Three commonly used energy management systems (expanded polypropylene foam, collapsing honeycomb and hydraulic shock absorbers) were fully characterized in 2.2 m/s pendulum bumper impact testing. This work was done to better understand the dynamic energy transfer and absorption of the system components and any synergies which exist between them. The test results showed that the energy absorbing systems which exhibited the best load and deflection performance when considered as individual components do not always work the most synergistically with the reinforcement beam. Simply examining the energy absorber's performance alone did not truly reflect the ability of the beam/absorber system's ability to manage energy.

This paper will describe an approach to satisfying proposed European Enhanced Vehicle Safety Committee (EEVC) legislation for lower leg pedestrian impact. The solution for lower leg protection is achieved through a combination of material properties and design. Using Computer Aided Engineering (CAE) modeling, the performance of an energy absorber (EA) concept was analyzed for knee bending angle, knee shear displacement, and tibia acceleration. The modeling approach presented here includes a sensitivity analysis to first identify key material and geometric parameters, followed by an optimization process to create a functional design. Results demonstrate how an EA system designed with a polycarbonate/polybutyelene terephthalate (PC/PBT) resin blend, as illustrated in Figure 1, can meet proposed pedestrian safety requirements.

A technique for estimating the lateral loads exerted on the vehicle frame during centerline pendulum impacts has been developed. These loads can either be determined by sophisticated hand calculations or by using beam finite-element analysis. The loads can either be determined as a fraction of the peak impact load, or as an absolute number. The dependence of the lateral load on frame stiffness, bumper cross-section, and bumper sweep will be shown to be quite dramatic.

Thermoplastic body panels are emerging in the industry as automotive manufacturers seek to design for advanced aerodynamic styling, lower weight, and cost effective vehicles. To best exhibit the advantages of GE thermoplastic resins in these applications, an extensive study has been completed to demonstrate the impact performance of thermoplastic body panels in the field based on the current success with the Buick LeSabre T-Type, Buick Reatta, and the Cadillac Deville and Fleetwood models using NORYL GTX® 910 resin fenders. This study provides a “real life” scenario of the advantages of thermoplastics compared to steel in body panel applications.

The first single-piece, injection-molded, thermoplastic, front bumper for a light truck provides improved performance and reduced cost for the 1997 MY Explorer® Ltd. and 1988 MY Mountaineer® truck from Ford Motor Company. Additionally, the system provides improved impact performance, including the ability to pass 5.6 km/hr barrier impact tests without damage. Further, the advanced, 1-piece design integrates fascia attachments, reducing assembly time, and weighs 8.76 kg/bumper less than a baseline steel design. The complete system provides a cost savings vs. extruded aluminum and is competitive with steel bumpers.

Current accelerated weathering protocols such as SAE J1960 or ASTM G26 do not provide reliable, predictive results for engineering thermoplastics. Correlation factors among resin types and even different colors of a single resin have variations that are 60-100% of the mean at the 95% confidence level, making these tests useless for lifetime prediction or even reliable ranking of materials. We have developed improved conditions using CIRA/sodalime-filtered xenon arc, a more rain-like water spray, and occasional sponge-wiping of the samples. The data for gloss loss and color shift agree very well with Florida data giving a correlation factor of 3100±680 kJ/m2 (at 340 nm) per Florida year at the 95% confidence level. The acceleration factor is 7.6x.

This paper discusses a Design for Six Sigma (DFSS) based methodology for designing an injection molded bumper energy absorber to help meet vehicle pedestrian protection requirements. The development process is described, and an example is presented of its use in designing an injection molded energy absorber for a range of various vehicle styling parameters. First, an idealized set-up incorporating the car styling parameters critical for pedestrian protection requirements was developed. Then, the vehicle and Energy Absorber (EA) geometries were parameterized and a DFSS process was employed to investigate the design space using Finite Element Impact Analysis with a commercially available Lower Leg Form Impactor.

An efficient energy absorber (EA) will absorb impact energy through a combination of elastic and plastic deformation. However, the EA is typically coupled with a steel reinforcing beam, which can also elastically and plastically deform during an impact event. In order to design and optimize an EA/Beam system that will meet the specified vehicle impact requirements, the response of the entire assembly must be accurately predicted. This paper will describe a finite element procedure and material model that can be used to predict the impact response of a bumper system composed of an injection molded thermoplastic energy absorber attached to a steel beam. The first step in the process was to identify the critical material, geometric, and boundary condition parameters involved in the EA and Beam individually. Next, the two models were combined to create the system model. Actual test results for 8km/hr.

Basic automotive steering wheel armature design has been largely unchanged for years. A cast aluminum or magnesium armature is typically used to provide stiffness and strength with an overmolded polyurethane giving shape and occupant protection. A prototype steering wheel armature made from a unique recyclable thermoplastic eliminates the casting while meeting the same stiffness, impact, and performance criteria needed for the automotive market. It also opens new avenues for styling differentiation and flexibility. Prototype parts, manufacturing, and testing results will be covered.

This paper presents results from a series of tests that address safety related issues concerning vehicle glazing. These issues include occupant containment, head impact injury, neck injuries, fracture modes, and laceration. Component-level and full vehicle crash tests of standard and polycarbonate non-windshield glazing were conducted. The tests were conducted as part of a study to demonstrate that there is no decrease in the safety benefits offered by polycarbonate glazing when compared to current glazing. Readers of this paper will gain a broader understanding of the tests that are typically conducted for glazing evaluation from a safety perspective, as well as gain insight into the meaning of the results.

The increased demands of today's complex automotive connector designs have led to the development of engineering structural analysis tools which address the performance issues of the connector's snap-finger. In designs where hand calculations were once considered the norm in evaluating snap-finger performance, the analysis tools have evolved into the use of finite element techniques which address the high nonlinearity issues of snap-finger disassembly and terminal pull out strength. The structural analysis approaches developed investigate the connector snap-finger performance in reinforced engineering thermoplastics while incorporating the effects of geometric and material nonlinearity in the results. The techniques developed allow for the evaluation of snap-finger performance of prospective connector designs before expensive tooling and prototyping is initiated, providing the benefits of limited tool rework and decreased product development time.

Engineering thermoplastics are widely used in a variety of automotive components systems because of their excellent balance of mechanical performance, design flexibility, aesthetics, parts integration, and low specific gravity. This combination of properties allows for the creation of highly integrated modules, which can increase assembly efficiency and reduce mass, part count, warranty and ergonomic issues, and systems costs. As a result, the use of engineering thermoplastic materials can enhance market competitiveness at a time of increased global competition. To evaluate the economic advantages of polymers in a specific vehicle system, a design for assembly (DFA) case study was conducted with the goal of determining the variable system cost case for a generic thermoplastic door module system vs. conventional-build door systems based on assembly savings gains. This paper will describe the study and show the results achieved.