Search Results

The performance of structure-borne road NVH can be cascaded down to three major systems: 1) vehicle body structure, 2) chassis/suspension, 3) tire/wheel. The forces at the body attachment points are controlled by the isolation efficiency of the chassis/suspension system and the excitation at the spindle/knuckle due to the tire/road interaction. The chassis force transmissibility is a metric to quantify the isolation efficiency. This paper presents a new experimental methodology to estimate the chassis force transmissibility from a fully assembled vehicle. For the calculation of the transmissibility, the spindle force/moment estimation and the conventional Noise Path Analysis (NPA) methodologies are utilized. A merit of the methodology provides not only spindle force to body force transmissibility but also spindle moment to body force transmissibility. Hence it enables us to understand the effectiveness of the spindle moments on the body forces.

Past studies have shown that NVH CAE tire model quality is not adequate to correctly capture a mid-frequency range (100-300 Hz). A new methodology has been developed to estimate tire forces that are independent of dynamic characteristics of vehicle suspension and rig test fixture. The forces are called tire blocked forces and defined as a force generated by a tire/wheel system whose boundary condition is constrained. The tire blocked force is estimated by removing the dynamic effect of the tire force measurement fixture. The blocked forces can be applied to CAE models to predict vehicle road NVH responses. This new method can also be used as a target setting tool. Tire suppliers can check the blocked tire forces from the rig testing data against a force target before they submit tires to automotive manufacturers for evaluations on a prototype vehicle.

Nibble is torsional vibration at the steering wheel of a vehicle. Typically it occurs at a resonant frequency of the steering and suspension system excited by the 1st harmonic tire/wheel force. A nibble target is established to be consistent with customer satisfaction target and then cascaded down to the targets for vehicle nibble sensitivity and tire/wheel inputs. Hence accuracy of the sensitivity and the tire/wheel force is important for a Computer Aided Engineering (CAE) nibble simulation. On-vehicle wheel-end forces are fore/aft and vertical tire/wheel forces acting on a vehicle spindle in an operating condition. This paper presents a methodology to estimate the wheel-end forces. The methodology was applied to investigate the effect of the tire flat-spot on the wheel-end forces. Tires were flat-spotted for one week and two months to simulate customer usage profiles. They were tested to measure the growth of the wheel-end forces.