Search Results

The performance of three different six-year old dummies, the new Hybrid III six-year-old from First Technology Safety Systems, the Part 572 Subpart I and the TNO P6, was compared in a series of HYGE sled tests. The dummies were tested on aftermarket booster cushions in a Volvo 850 sled buck. Two different sled pulses were used: a Volvo 850 30 mph frontal crash pulse and an ECE R.44 pulse. The behavior of the dummies was compared for these two sled pulses. Motion analysis from high speed film was performed, showing the trajectories of the dummy heads. All dummies were fitted with triaxial accelerometers in the head, chest and pelvis. The Hybrid III was also equipped with a chest deflection transducer and Denton six-channel upper neck and five-channel lumbar spine load cells. The signals from a number of these sensors were compared.

The Inflatable Curtain (IC) has shown great potential to reduce head injuries in side impacts. This study explores and presents enhanced performance in two steps of improved activation algorithms. Crash data analysis, 21 full scale crash tests and component tests in a custom built drop tower rig have been performed. The IC performance in wider crash scenarios, including side impacts outside the occupant compartment (L-type impacts), was evaluated. Both statistical crash data and in-depth studies were used. It was found in the analysis of real life crashes that moderate to fatal head injuries can occur without intrusion in the occupant compartment. In L-type side impacts, the motion of the occupant relative to the vehicle interior may cause a head impact of sufficiently high severity to cause moderate to severe head injuries. A combined analysis of real world crash data and crash test results indicates that a substantial reduction in moderate to fatal head injuries can be achieved.

Recent cadaver studies have provided data for the development of force and stiffness characteristics of the side of the human head. A Hybrid III Anthropomorphic Test Dummy (ATD) head was modified to allow direct measurement of impact forces on the parietal and temporal regions by recasting the upper left half of the skull and installing triaxial piezoelectric force transducers. Dynamic impact tests of this modified head were conducted and force/stiffness characteristics for the temporal and parietal areas were compared to existing data on cadaver subjects. It was found that the existing Hybrid III vinyl skin satisfactorily represents the force/stiffness characteristics of the human head in these areas. This modified Hybrid III dummy head was also impacted against typical interior components likely to be contacted during a side impact. The force and acceleration test results are presented.

This article describes an expert system for objective rating of subjective characteristics like driving comfort. The system uses radial basis neural networks that can be trained on any dynamic properties, for example acceleration. Training and retraining can be done in real-time. The system includes a measure of the reliability of automatic judgement, which can be used to signal when new training may be necessary. The article shows in detail how the system has been used to automatically judge gearshift comfort for automatic transmission. Tests indicate that the system's accuracy and consistency are as good as one of Volvo's best experts.

An experimental and computational study of the near-wall combustion in a Homogeneous Charge Compression Ignition (HCCI) engine has been conducted by applying laser based diagnostic techniques in combination with numerical modeling. Our major intent was to characterize the combustion in the velocity- and thermal boundary layers. The progress of the combustion was studied by using fuel tracer LIF, the result of which was compared with LDA measurements of the velocity boundary layer along with numerical simulations of the reacting boundary layer. Time resolved images of the PLIF signal were taken and ensemble averaged images were calculated. In the fuel tracer LIF experiments, acetone was seeded into the fuel as a tracer. It is clear from the experiments that a proper set of backgrounds and laser profiles are necessary to resolve the near-wall concentration profiles, even at a qualitative level.

A novel approach to the control of a GDI engine is presented. The controller consists of a combination of sub-controllers, where torque feedback is a central part. The sub-controllers are with a few exceptions designed using simple linear feedback and feedforward control design methods. Special mode switch strategies are used to minimize the torque bumps during combustion mode changes. The controller has been evaluated on the European driving cycle using a dynamic simulation model, including a powertrain model and a driver model, with good results.

The airbag simulation program DRACR has been revised to include belt routines. The amended program is used to indicate optimal choice of parameters for a driver supplementary airbag system. As a validation, results from sled tests are given and compared with the computer runs. A good agreement is found for the values of the most essential protection criteria such as chest g's and HIC's. The model has proven to be useful in the engineering process of an airbag restraint system. The interrelationship between important input variables is easily studied. Further validation of the model by other teams is encouraged

A positive trend to more frequent use of child restraint systems (CRS) in Sweden, during the last 20 years, is shown in this report. During the same period, the overall injury risk, for different age groups of child occupants, has decreased substantially. This indicates the high effectiveness of the child restraint systems. Children need car occupant safety systems specially designed for their size. This paper clearly states the need for child safety systems and discusses benefits and drawbacks with regard to different restraints, ages and injuries. The analysis points out, that when a crash occurs, the maximum effect of a child restraint system is not reached, if the child is not using the correct system for their size. There is even a tendency that the injury risk increases when children switch from one restraint system to another, i.e. are at the youngest ages for which the specific restraint is recommended. The background data used, is based on Volvo's traffic accident research.