Search Results

Several advanced signal processing algorithms beyond the FFT such as time-frequency analysis, quefrency, cestrum, wavelet analysis, and AR modeling uses are outlined. These advanced algorithms can solve some sound and vibration challenges that FFT-based algorithms cannot solve. Looking at signal characteristics of a unit under test in the time-frequency plane, it is possible to get a better understanding of signal characteristics. This is an overview of these algorithms and some application examples, such as speaker testing, bearing fault detection, dashboard motor testing, and engine knock detection where they can be applied to NVH applications.

This is an overview of the development of a portable, real-time acoustic beamformer based on FPGA (Field Programmable Gate Arrays) and digital microphones for noise source identification. Microphone arrays can be a useful tool in identifying noise sources and give designers an image of noise distribution. The beamforming algorithm is a classic and efficient algorithm for signal processing of microphone arrays and is the core of many microphone array systems. High-speed real-time beamforming has not been implemented much in a portable instrument because it requires large computational resources. Utilizing a beamforming algorithm running on a Field Programmable Gate Array (FPGA), this camera is able to detect and locate both stationary and moving noise sources. A high-resolution optical camera located in the middle of the device records images at a rate of 25 frames per second. The use of the FPGA technology and digital microphones provides increased performance, reduced cost and weight.

Vehicle communication networks are challenged by increasing demands for bandwidth, safety, and security. New data is coming into the vehicle from personal devices (e.g. mobile phones), infotainment systems, camera-based driver assistance, and wireless communication with other vehicles and infrastructure. Ethernet (IEEE 802.3) provides high levels of bandwidth and security, making it a potential solution to the challenges of vehicle communication networks. However, in order to be used in control applications, Ethernet must provide known timing performance (e.g. bounded latency and jitter), and in some cases redundancy. This paper explores use of Ethernet for in-vehicle control applications.

In many measurement applications, there is a need to correlate data acquired from different systems or synchronize systems together with precise timing. Signal Based and Time Based are the two basic methods of synchronizing instrumentation. In Signal Based synchronization, clocks and triggers are physically connected between systems. Typically this provides the highest precision synchronization. In many NVH applications size and distance constrains physically connecting the systems needed for making measurements though the inter-channel phase information of simultaneously sampled signals is crucial. In Time Based synchronization, system components have a common reference of what time it is. Events, triggers and clocks can be generated based on this time.

Modular instrumentation is being widely used in noise and vibration measurement systems that demand higher channel counts and the wider dynamic range that 24-bit delta-sigma ADCs make available at lower costs. This is an overview how flexible modular instrumentation employing the latest software technology can be used in making high precision noise and vibration measurements where higher sampling rates, higher channel counts, increased dynamic range, and distributed architectures were needed in smaller packages. An example where this is being used is in acoustic beam forming in aircraft pass by noise tests to measure and distinguish engine and airframe noise sources.

Due to the increase in public attention in the analysis of non-exhaust emission sources because of the growing electrification of vehicles, measurements have been performed in recent years to develop a consistent test standard. In particular, the consideration of tyre and brake abrasion took a predominant position due to the small particle sizes. With measurements under controlled and laboratory-like athmosphere, for example for brakes on dynamometers, attempts have been made to create a uniform test standard according to the Worldwide harmonized Light vehicles Test Procedure (WLTP). However, a transfer to the real driving environment is not yet feasible because of many external disturbance variables, such as the wheel housing or atmospheric variables. Typical reference measurement sensors in the vehicle are only suitable to a limited extent for mobile operation due to their size and the necessary measurement infrastructure.

LIN is a low-cost, low-speed vehicle communication sub-bus becoming increasingly pervasive in automotive subsystems. It is a simple, UART-based master-slave protocol designed as a low-speed supplement to a CAN or FlexRay bus. Its primary application is cabin comfort and human interface hardware such as dashboard controls, power seat harnesses, and power door/window systems. As automotive network designers attempt to reduce wiring complexity and lower system cost, modular, inexpensive sub-buses like LIN become an attractive option. This paper presents an overview of the LIN standard and its applications, and then proposes an architecture for rapid development of LIN networks via hardware simulations of LIN nodes. Using inexpensive, off-the-shelf hardware, LIN sensor and actuator applications can be tested in-place without microcode development, speeding overall network development time.

Brake pad materials in today's commercially marketed vehicles are usually complex phenolic resin based composites with numerous ingredients. Since the abandonment of asbestos fibers, different material classes evolved in Europe (low steel), North America (semimet) and Asia (NAO), which specifically meet the requirements of the respective market [ 1 ]. For these complex materials, no a-priori prediction of friction and wear performance is possible today [ 2 ]. Research over the past decade revealed that friction power and wear debris are interrelated [ 3 ] and that the topography of the friction layer shows a very rich dynamic [ 4 ]. The respective processes can be well described with a family of dynamic friction laws, which is suitable for the description of AK-Master test results [ 5 ], as well as for the understanding of history dependent high frequency effects.