Refine Your Search

Date

Date

Topic

Topic

Electrical, Electronics, and Avionics Control systems Pressure A-21 Aircraft Noise Measurement Aviation Emission Modeling

Search Results

Viewing 1 to 20 of 37
12Next >Last >>
Sort by title
Standard

Application of Pure-Tone Atmospheric Absorption Losses to One-Third Octave-Band Data
2021-01-05
CURRENT
ARP5534
This document presents a practical method for calculating atmospheric absorption for wide-band sounds analyzed with one-third octave-band filters, called the SAE Method. The SAE Method utilizes pure-tone attenuation algorithms originally published in ISO 9613-1 and ANSI S1.26-1995 to calculate path-length attenuation at mid-band frequencies. The equations introduced in this standard transform the pure-tone, mid-band attenuation to one-third octave-band attenuation. The purpose of this guidance document is to extend the useful attenuation range of the Approximate Method outlined in ANSI S1.26-1995, and to replace ARP866A. Calculation of sound attenuation caused by mechanisms other than atmospheric absorption such as divergence, refraction, scattering due to turbulence, ground reflections, or non-linear propagation effects, is outside the scope of this document.
Standard

Determination of Distance from Ground Observer to Aircraft for Acoustic Tests
2022-11-18
CURRENT
AIR902A
This document describes a practical system for a user to determine observer-to-aircraft distances. These observer-to-aircraft distances can be either closest point of approach (CPA) distances during field measurements or overhead distances during acoustic certification tests. The system uses a digital camera to record an image of the subject aircraft. A method of using commercial software to obtain the distance from such an image is presented. Potential issues which may affect accuracy are discussed.
Standard

Fuel Flow Rates for Jet-Powered Commercial Aircraft Taxi Operations
2023-04-04
CURRENT
AIR8035
This SAE Aerospace Information Report (AIR) summarizes prior empirical findings (AIAA 2018-3991; Chati, 2018) to recommend a modified baseline fuel flow rate model for jet-powered commercial aircraft during taxi operations on the airport surface that better reflects operational values. Existing standard modeling approaches are found to significantly overestimate the taxi fuel flow rate; therefore, a modified multiplicative factor is recommended to be applied to these existing approaches to make them more accurate. Results from the analysis of operational flight data are reported, which form the basis for the modeling enhancements being recommended.
Standard

Ground-Plane Microphone Configuration for Propeller-Driven Light-Aircraft Noise Measurement
2007-11-07
HISTORICAL
ARP4055
The scope of this ARP embraces the description of a configuration for a ground-plane microphone installation that may be used to determine sound pressure levels equivalent to those which would have been measured in an acoustic freefield at the microphone location. The one-third - octave-band center-frequency range over which equivalent freefield sound pressure levels may be obtained is from as low as 50 Hz to at least as high as 10,000 Hz. The specific application of the measurement technique described in this ARP is the determination of the equivalent freefield sound pressure levels of the noise produced by propeller-driven light aircraft, in flight, for sound incidence angles within 30 degrees of the normal to the ground. For larger angles to the normal, additional adjustments may be necessary which are outside the scope of this ARP.
Standard

Ground-Plane Microphone Configuration for Propeller-Driven Light-Aircraft Noise Measurement
2020-12-21
CURRENT
ARP4055A
The scope of this ARP embraces the description of a configuration for a ground-plane microphone installation that may be used to determine sound pressure levels equivalent to those which would have been measured in an acoustic freefield at the microphone location. The one-third - octave-band center-frequency range over which equivalent freefield sound pressure levels may be obtained is from as low as 50 Hz to at least as high as 10,000 Hz. The specific application of the measurement technique described in this ARP is the determination of the equivalent freefield sound pressure levels of the noise produced by propeller-driven light aircraft, in flight, for sound incidence angles within 30 degrees of the normal to the ground. For larger angles to the normal, additional adjustments may be necessary which are outside the scope of this ARP.
Standard

MEASUREMENT OF EXTERIOR NOISE PRODUCED BY AIRCRAFT AUXILIARY POWER UNITS (APUs) AND ASSOCIATED EQUIPMENT DURING GROUND OPERATION
1979-03-01
HISTORICAL
ARP1307
Test procedures are described for measuring noise at specific locations (passenger and cargo doors, and servicing positions) and for conducting general noise surveys around aircraft. Requirements are identified with respect to instrumentation; acoustic and atmospheric environment; data acquisition, reduction and presentation, and such other information as is needed for reporting the results. Recommended procedures involve recording data on magnetic tape for subsequent processing. The use of tape-recorder/time-integrating analyzer systems avoids the need to average by eye the variations associated with manual readings from sound level meters and octave band analyzers and therefore yields more accurate results. This document makes no provision for predicting APU noise from basic engine characteristics, nor for measuring noise of more than one aircraft operating at the same time.
Standard

MEASUREMENT OF FAR FIELD NOISE FROM GAS TURBINE ENGINES DURING STATIC OPERATION
1995-09-19
HISTORICAL
ARP1846
Recommendations presented in this document are intended primarily for the acquisition of far-field acoustical data. The test engine is to be appropriately configured and operated so that the acoustical signals generated are consistent with the specific objectives of the test. The principal output of the data reduction system is one-third octave band sound pressure levels. However, broader or narrower bandwidth analysis of the recorded data may also be accomplished when appropriate. Although not specifically intended to apply to special purpose engine noise testing (for example, tests involving unique instrumentation or procedures to identify specific noise sources), some of the practices described herein may be appropriate for such testing. Specification of reference conditions is outside the scope of this document although procedures to adjust data to a reference condition are described in 7.2.4.
Standard

MEASUREMENT OF ROTORCRAFT INTERIOR SOUND PRESSURE LEVELS
1993-05-01
HISTORICAL
ARP1964
Satisfactory measurements of noise in personnel-occupied rotorcraft cabins may require test techniques different from those prescribed for other types of aircraft (ARP1323) because rotorcraft operate under significantly different flight conditions. Recommendations of this ARP apply to the recording of acoustical data on magnetic tape and the subsequent processing and analysis of the recorded data.
Standard

Measurement of Far Field Noise from Gas Turbine Engines During Static Operation
2008-03-05
HISTORICAL
ARP1846A
Recommendations presented in this document are intended primarily for the acquisition of far-field noise data. The test engine is to be appropriately configured and operated so that the sound pressure levels obtained are consistent with the specific objectives of the test. The principal output of the data reduction system is one-third octave band sound pressure levels. However, when appropriate, data may be recorded for purposes of broader or narrower bandwidth analysis.
Standard

Measurement of Far Field Noise from Gas Turbine Engines During Static Operation
2020-12-21
CURRENT
ARP1846B
Recommendations presented in this document are intended primarily for the acquisition of far-field noise data. The test engine is to be appropriately configured and operated so that the sound pressure levels obtained are consistent with the specific objectives of the test. The principal output of the data reduction system is one-third octave band sound pressure levels. However, when appropriate, data may be recorded for purposes of broader or narrower bandwidth analysis.
Standard

Measurement of Rotorcraft Interior Sound Pressure Levels
2012-08-16
CURRENT
ARP1964A
Satisfactory measurements of noise in personnel-occupied rotorcraft cabins may require test techniques different from those prescribed for other types of aircraft (ARP1323) because rotorcraft operate under significantly different flight conditions. Recommendations of this ARP apply to the recording of acoustical data on magnetic tape and the subsequent processing and analysis of the recorded data.
Standard

Method for Modeling Line-of-Sight Blockage of Aircraft Noise
2020-02-20
CURRENT
AIR6501
This document describes methods for calculating the attenuation of sound due to line-of-sight blockage or shielding from non-level terrain. This method applies to sound propagating from an airplane to locations on the ground during ground roll, climbout after liftoff, and landing operations. AIR1845 and AIR5662 provides guidance for modeling aircraft noise at airports with flat terrain. In reality, many airports are surrounded by non-level terrain that may result in attenuation (or shielding) of sound at some receptors. This noise blockage can be accounted for with the line-of-sight blockage calculation, based on the difference in propagation path length between the direct path and propagation path over the top of terrain feature. The purpose of this aircraft information report is to provide a method that accounts for the attenuation due to line-of-sight blockage of aircraft noise by terrain features.
Standard

Method for Predicting Lateral Attenuation of Airplane Noise
2019-10-04
CURRENT
AIR5662
This document describes analytical methods for calculating the attenuation of the level of the sound propagating from an airplane to locations on the ground and to the side of the flight path of an airplane during ground roll, climbout after liftoff, and landing operations. Both level and non-level ground scenarios may be modeled using these methods, however application is only directly applicable to terrain without significant undulations, which may cause multiple reflections and/or multiple shielding effects. This attenuation is termed lateral attenuation and is in excess of the attenuation from wave divergence and atmospheric absorption.
Standard

Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Description, Acquisition, and Operation
2012-07-12
CURRENT
ARP4721/1
This SAE Aerospace Recommended Practice (ARP) provides engineering methods that can be applied to monitoring aircraft noise and operations in the vicinity of airports using either attended or unattended monitoring systems, as well as methods for validation of measurement results from permanent systems. Part 1 provides guidance on the components, installation and administration of permanent systems and guidance on analysis of data collected from temporary monitoring of aircraft noise. A separate document, Part 2, describes both system screening tests and detailed test methods for validating the data reported by permanently installed systems. This document is intended as a guide toward standard practice and is subject to change with experience and technical advances. Potential users include: airport proprietors, airport neighbors, federal, state and local government agencies, equipment vendors and other public bodies and officials.
Standard

Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Description, Acquisition, and Operation
2020-01-28
WIP
ARP4721/1A
This SAE Aerospace Recommended Practice (ARP) provides engineering methods that can be applied to monitoring aircraft noise and operations in the vicinity of airports using either attended or unattended monitoring systems, as well as methods for validation of measurement results from permanent systems. Part 1 provides guidance on the components, installation and administration of permanent systems and guidance on analysis of data collected from temporary monitoring of aircraft noise. A separate document, Part 2, describes both system screening tests and detailed test methods for validating the data reported by permanently installed systems. This document is intended as a guide toward standard practice and is subject to change with experience and technical advances.
12Next >Last >>
X