Refine Your Search

Date

Date

Topic

Topic

Chassis Sensors and actuators A-6C2 Seals Committee Seals and gaskets Regulations Quality, Reliability, and Durability

Search Results

Viewing 1 to 20 of 175
123Next >Last >>
Sort by title
Standard

AEROSPACE STANDARD, GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS
1993-06-11
HISTORICAL
AS4716
This SAE Aerospace Standard provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static and dynamic applications. The glands have been specifically designed for applications using SAE AS568 size O-rings at pressures exceeding 1500 psi utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi without backup rings. The glands have been sized to provide sufficient squeeze for effective sealing while at the same time limiting squeeze to allow satisfactory operation in dynamic applications. While specifically designed for standard size O-rings, these glands are also to be used with other elastomeric seals.
Standard

Aerospace - Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings
2019-05-17
CURRENT
AS5752
This standard provides the following: a The required surface finish criteria for the designed function of the parts b The definition of surface imperfections and defects that affect surface quality c The categories by location for each geometry for the permissible type, size and quantity of defects It also establishes the quantitative levels of acceptance by providing defined limits and inspection guidance for the acceptance or rejection of production parts This specification is applicable but not limited to, the surface quality of: T-Seals L-Rings Capped T Rings Capped L Rings Cammed Type Seals Cruciform Shaped Elastomers Pyramid (Dyna-Bak) Seals Square Ring Seals Quadruple Lobed Seals U-Cups Spring Energized U-Cups Molded in Place Metal Gasket Seals
Standard

Aerospace Rod Scraper Gland Design Standard
2020-11-03
CURRENT
AS4088F
This SAE Aerospace Standard (AS) defines gland details for scrapers for rod diameters from 1/4 to 15-1/2 inch (6.35 to 393.70 mm) inclusive, corresponding to AS568 O-ring Dash No. sizes -108/-111, -206/-222, -325/-349, and -425/-460. The gland details herein allow the use of more stable, efficient, and reliable scraper devices than MS33675 glands.
Standard

Aerospace Rod Scraper Gland Design Standard
2018-02-06
HISTORICAL
AS4088E
This SAE Aerospace Standard (AS) defines gland details for scrapers for rod diameters from 1/4 to 15-1/2 inch (6.35 to 393.70 mm) inclusive, corresponding to AS568 O-ring Dash No. sizes -108/-111, -206/-222, -325/-349, and -425/-460. The gland details herein allow the use of more stable, efficient and reliable scraper devices than MS33675 glands. NOTE: Scraper configurations are not specified in this document.
Standard

Aerospace Size Standard for O-Rings
2020-03-02
HISTORICAL
AS568E
This SAE Aerospace Standard (AS) specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-Rings
2020-09-29
CURRENT
AS568F
This SAE Aerospace Standard (AS) specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-Rings
2001-03-01
HISTORICAL
AS568B
This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-rings
2014-03-11
HISTORICAL
AS568D
This SAE Aerospace Standard (AS) specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace Size Standard for O-rings
2008-12-03
HISTORICAL
AS568C
This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.
Standard

Aerospace, Slipper Seals, Selection for Fluid Power Applications
2022-08-05
CURRENT
AIR1244B
This SAE Aerospace Information Report (AIR) provides basic information on the use of slipper seal sealing devices when used as piston (OD) and rod (ID) seals in aerospace fluid power components such as actuators, valves, and swivel joints, including: The definition of a slipper seal and the description of the basic types in use. Guidelines for selecting the type of slipper seal for a given design requirement are provided in terms of friction, leakage, service life, installation characteristics, and interchangeability.
Standard

Anti Blow-By Design Practice for Cap Seals
2013-02-10
HISTORICAL
AIR1243C
This SAE Aerospace Information Report (AIR) provides information on anti blow-by design practice for cap seals. Suggestions for piston cap seal sidewall notch design and other anti blow-by design details are also described. It also includes information on two key investigations based on the XC-142 as part of the text and as Appendix A.
Standard

Anti Blow-By Design Practice for Cap Seals
2018-08-13
CURRENT
AIR1243D
This SAE Aerospace Information Report (AIR) provides information on anti blow-by design practice for cap seals. Suggestions for piston cap seal sidewall notch design and other anti blow-by design details are also described. It also includes information on two key investigations based on the XC-142 as part of the text and as Appendix A.
Standard

Anti Blow-By Design Practice for Cap Seals
2005-04-26
HISTORICAL
AIR1243B
This SAE Aerospace Information Report (AIR) provides information on anti blow-by design practice for cap seals. Suggestions for piston cap seal sidewall notch design and other anti blow-by design details are also described. It also includes information on two key investigations based on the XC-142 as part of the text and as Appendix A.
Standard

Calculations and Background Information Used to Specify the Dimensions in AS6235
2021-11-09
CURRENT
AIR7358
This SAE Aerospace Information Report (AIR) contains a description of the design approach, the calculations, some comparisons to alternate SAE Aerospace Recommended Practice (ARP) documents, and the background information used to generate the standard face seal gland dimensions specified in AS6235. NOTE: This AIR should be read in conjunction with AS6235. In some instances, the information contained within AS6235 is repeated for clarity.
Standard

Elastomer Compatibility Considerations Relative to Elastomer Selection
2021-10-01
CURRENT
AIR786C
This SAE Aerospace Information Report (AIR) contains data relative to the chemical nature of aerospace fluids and relates each to its empirical effect upon elastomeric components. Since the compatibilities of elastomers are determined by the compounding as well as the nature of the base polymer, the elastomers considered are limited to finished compounds for which material or performance specifications can be referenced.
123Next >Last >>
X