Refine Your Search

Topic

Search Results

Standard

AIR MODE GENERAL PURPOSE CONTAINERS

1995-08-01
HISTORICAL
AS4041A
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m X 2.44 m (8 ft X 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

AIR-LAND DEMOUNTABLE CARGO PALLET NETS

1975-08-01
HISTORICAL
AS1131A
This document establishes four sizes of basic pallet nets as follows: Size F (10 ft) - To restrain a 96 x 117.75 x 96 in. (2,43 x 2,99 x 2,43 m) high (maximum) load. Size G (20 ft) - To restrain a 96 x 238.500 x 96 in. (2,43 x 6,05 x 2,43 m) high (maximum) load. Size H (30 ft) - To restrain a 96 x 359.25 x 96 in. (2,43 x 9,12 x 2,43 m) high (maximum) load. Size J (40 ft) - To restrain a 96 x 480 x 96 in. (2,43 x 12,19 x 2,43 m) high (maximum) load.
Standard

AS36100 Background and Development Record

2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

Air Cargo Pallet Extenders

2004-04-26
HISTORICAL
AS1988A
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extenders.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2018-10-16
WIP
AS36100C
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2005-02-10
HISTORICAL
AS36100
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0 g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2016-06-06
CURRENT
AS36100B
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices – Performance Requirements and Test Parameters

2006-04-27
HISTORICAL
AS36100A
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices – Testing Methods

2017-03-14
CURRENT
AS36102B
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
Standard

Air Mode Active Containers Conditioning Performance

2010-11-15
CURRENT
ARP5741
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
Standard

Air Mode General Purposes Containers

2014-03-25
CURRENT
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

Air and Air/Surface (Platform) Cargo Pallet Nets

2002-02-24
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard

CARGO PALLET EXTENDERS

1990-09-01
HISTORICAL
AS1988
Pallet extensions provide support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved. The extensions are designed to suit the contour of wide-bodied aircraft. Each extension consists of a panel or shelf extending upwards and outboards within an envelope bounded by the ULD contour (see Figures 1, 2, 3, and 4). The panel or shelf is secured in this position by means of chains, cables, or structural members attached to the rails of the adjacent sides of the pallet edge.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2002-07-15
HISTORICAL
AS5385A
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2004-11-17
HISTORICAL
AS5385B
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2017-05-08
CURRENT
AS5385D
This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2007-01-09
HISTORICAL
AS5385C
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22,250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
X