Refine Your Search

Date

Date

Topic

Topic

Parts Environmental testing Vehicle dynamics AGE-2 Air Cargo Fibers

Search Results

Viewing 1 to 20 of 114
123Next >Last >>
Sort by title
Standard

AIR MODE GENERAL PURPOSE CONTAINERS
2008-06-22
HISTORICAL
AS4041A
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m X 2.44 m (8 ft X 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

AIR-LAND DEMOUNTABLE CARGO PALLET NETS
1975-08-01
HISTORICAL
AS1131A
This document establishes four sizes of basic pallet nets as follows: Size F (10 ft) - To restrain a 96 x 117.75 x 96 in. (2,43 x 2,99 x 2,43 m) high (maximum) load. Size G (20 ft) - To restrain a 96 x 238.500 x 96 in. (2,43 x 6,05 x 2,43 m) high (maximum) load. Size H (30 ft) - To restrain a 96 x 359.25 x 96 in. (2,43 x 9,12 x 2,43 m) high (maximum) load. Size J (40 ft) - To restrain a 96 x 480 x 96 in. (2,43 x 12,19 x 2,43 m) high (maximum) load.
Standard

AIRCRAFT CARGO DOOR OPENING/SILL DETAILS FOR GROUND SUPPORT EQUIPMENT INTERFACE
1992-12-01
HISTORICAL
AIR1673
Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This Aerospace Information Report has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.
Standard

AIRCRAFT ENGINE TRANSPORT DEVICES
1992-12-01
HISTORICAL
ARP1840
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

AS36100 Background and Development
2011-11-23
CURRENT
AIR36107A
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

AS36100 Background and Development Record
2018-10-18
CURRENT
AIR36108
This Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices — Performance Requirements and Test Parameters, published 2005-02, and its revision A published 2006-04, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for — [ Revision 10, 1990, referenced in TSO C90(c) ].
Standard

AS36100 Background and Development Record
2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

Air Cargo Pallet Extenders
2009-12-10
HISTORICAL
AS1988A
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extenders.
Standard

Air Cargo Pallets - Utilization Guidelines
2019-04-01
CURRENT
ARP5486
Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner.
Standard

Air Cargo Pallets and Nets Compatibility
2018-10-18
CURRENT
ARP36104A
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100A [TSO pending] performance and testing requirements.
Standard

Air Cargo Pallets and Nets Compatibility
2005-11-04
HISTORICAL
ARP36104
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and an air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100 [TSO pending] performance and testing requirements.
Standard

Air Cargo Unit Load Devices - Center of Gravity Control Methods
2004-07-07
HISTORICAL
ARP36103
This SAE Aerospace Recommended Practice (ARP) provides the industry agreed methods to keep the center of gravity (C.G.) location of loaded air cargo Unit Load Devices (ULDs) within the maximum horizontal and vertical limits allowed by their airworthiness approval.
Standard

Air Cargo Unit Load Devices - Load Distribution Model
2004-01-14
HISTORICAL
AS36101
This SAE Aerospace Standard (AS) defines an industry agreed reference model for load distribution on air cargo unit load device (ULD) bases, to reflect maximum allowable center of gravity (CG) eccentricity and ensure the maximum allowable area load is not exceeded.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters
2020-09-29
CURRENT
AS36100C
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0-g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters
2016-06-06
HISTORICAL
AS36100B
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices - Reference Documents
2017-04-13
CURRENT
AIR36105B
The present SAE Aerospace Information Report (AIR) provides a list of the main government regulations, SAE and international standards, and standing industry recommendations applying to air cargo unit load devices (pallets, nets, and containers) to be loaded with either baggage or freight on board civil transport aircraft.
Standard

Air Cargo Unit Load Devices - Reference Documents
2022-04-26
WIP
AIR36105C
The present SAE Aerospace Information Report (AIR) provides a list of the main government regulations, SAE and international standards, and standing industry recommendations applying to air cargo unit load devices (pallets, nets, and containers) to be loaded with either baggage or freight on board civil transport aircraft. It is intended to provide unit load devices designers, purchasers, and operators as well as civil transport aircraft and aircraft cargo systems designers within the industry with a list of the available document references to cover the other aspects that do not all directly pertain to airworthiness and testing, listed in 1.1 of AS36100, – Air Cargo Unit Load Devices - Performance Requirements and Test Parameters [TSO-C90].
Standard

Air Cargo Unit Load Devices - Reference Standards
2011-04-06
HISTORICAL
AIR36105
The present Aerospace Information Report (AIR) provides a list of the main government regulations, SAE and international standards, and standing industry recommendations applying to air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft.
123Next >Last >>
X