Refine Your Search

Date

Date

AGE-2 Air Cargo Quality, Reliability, and Durability Fatigue

Search Results

Viewing 1 to 20 of 32
12Next >Last >>
Sort by title
Standard

AIR-LAND DEMOUNTABLE CARGO PALLET NETS
1975-08-01
HISTORICAL
AS1131A
This document establishes four sizes of basic pallet nets as follows: Size F (10 ft) - To restrain a 96 x 117.75 x 96 in. (2,43 x 2,99 x 2,43 m) high (maximum) load. Size G (20 ft) - To restrain a 96 x 238.500 x 96 in. (2,43 x 6,05 x 2,43 m) high (maximum) load. Size H (30 ft) - To restrain a 96 x 359.25 x 96 in. (2,43 x 9,12 x 2,43 m) high (maximum) load. Size J (40 ft) - To restrain a 96 x 480 x 96 in. (2,43 x 12,19 x 2,43 m) high (maximum) load.
Standard

Air Cargo Pallets and Nets Compatibility
2018-10-18
CURRENT
ARP36104A
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100A [TSO pending] performance and testing requirements.
Standard

Air Cargo Pallets and Nets Compatibility
2005-11-04
HISTORICAL
ARP36104
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and an air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100 [TSO pending] performance and testing requirements.
Standard

Air Cargo Unit Load Devices - Center of Gravity Control Methods
2004-07-07
HISTORICAL
ARP36103
This SAE Aerospace Recommended Practice (ARP) provides the industry agreed methods to keep the center of gravity (C.G.) location of loaded air cargo Unit Load Devices (ULDs) within the maximum horizontal and vertical limits allowed by their airworthiness approval.
Standard

Air Cargo Unit Load Devices – Center of Gravity Control Methods
2012-11-21
CURRENT
ARP36103A
This SAE Aerospace Recommended Practice (ARP) provides the industry agreed methods to keep the center of gravity (C.G.) location of loaded air cargo Unit Load Devices (ULDs) within the maximum horizontal and vertical limits allowed by their airworthiness approval.
Standard

Air and Air/Surface (Platform) Cargo Pallet Nets
2018-10-18
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard

Cargo Restraint Straps - Utilization Guidelines
2003-03-27
HISTORICAL
ARP5595
This SAE Aerospace Recommended Practice (ARP) aims at providing general utilization guidelines and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems meeting the requirements of NAS 3610, or b additional tie-down on aircraft structure when necessitated by pallet maximum gross mass or CG, or c non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft, or d individual pieces of load loaded in non-containerized (bulk loaded) baggage or cargo compartments.
Standard

Certified Containers for Lower Deck Compartments
2018-10-18
CURRENT
AS5896
This SAE Aerospace Standard (AS) covers the design, fabrication, performance, and testing requirements for general-purpose, base-restrained, containers requiring airworthiness approval for installation/use in aircraft lower deck compartments. See 10.1 and 10.2.
Standard

Fittings, Cargo Tiedown, Aircraft
2006-04-27
HISTORICAL
AS7092A
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard

Fittings, Cargo Tiedown, Aircraft
2012-10-15
CURRENT
AS7092B
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard

Fittings, Cargo Tiedown, Aircraft
1999-07-01
HISTORICAL
AS7092
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
12Next >Last >>
X