Refine Your Search

Topic

Search Results

Standard

CONTRAST DYE PENETRANT INSPECTION

1991-10-15
HISTORICAL
AMS2646C
This specification establishes a procedure for detection of discontinuities open to the surface of parts by the use of a penetrating dye.
Standard

FLUORESCENT PENETRANT INSPECTION

1983-01-01
HISTORICAL
AMS2645H
This specification establishes a procedure for detection of defects by use of a fluorescent, penetrating liquid.
Standard

Fluoroscopic X-Ray Inspection

1945-08-01
HISTORICAL
AMS2650
This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of 1-1-84. It is recommended that this specification not be specified for new designs. This cover sheet should be attached to the initial issue of the sUbject specification. Noncurrent refers to those procedures which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division does not recommend these as standard procedures for future use in new designs. Each of these "Noncurrent" specifications is available from SAE upon request. This specification has been CANCELLED by the Aerospace Materials Division, SAE, as of August, 1989. By this action, subject specification number and its title will be deleted from the active specification index of Aerospace Material Specifications.
Standard

IMAGE QUALITY INDICATOR Radiographic

1988-01-01
HISTORICAL
AS1613A
This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.
Standard

Image Quality Indicator Radiographic

2012-05-22
CURRENT
AS1613B
This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.
Standard

Inspection Material, Penetrant

2019-04-08
CURRENT
AMS2644G
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
Standard

Inspection Material, Penetrant

2013-10-17
HISTORICAL
AMS2644F
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
Standard

Inspection Material, Penetrant

2003-11-17
HISTORICAL
AMS2644D
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
Standard

Inspection Material, Penetrant

2006-10-30
HISTORICAL
AMS2644E
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2018-08-08
CURRENT
AMS2630D
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2010-01-05
HISTORICAL
AMS2630C
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

1995-03-01
HISTORICAL
AMS2630B
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
X