Search Results

Standard

ADHESIVE-BONDED METAL-FACED SANDWICH STRUCTURES, ACCEPTANCE CRITERIA

2011-08-09

HISTORICAL

AMS3920

This specification establishes the acceptance criteria and inspection requirements for adhesive-bonded sandwich structures including the metal-to-metal bonding found in these structures.

Standard

AUTOMATED MANUFACTURE OF CONTINUOUS MULTI-PLY GRAPHITE FIBER/EPOXY RESIN IMPREGNATED BROADGOODS

1980-10-01

HISTORICAL

ARP1674

This Aerospace Recommended Practice (ARP) describes a manufacturing method for processing unidirectional graphite fiber/epoxy resin impregnated sheet and tape into multi-ply broadgoods and tape produced on an automated cross-plying machine. Broadgoods or tape of two or more ply configurations may be processed, where ply orientations of 0°, 45°, 90°, and 135° (as examples) may be automatically layed in a programmed sequence. In all configurations, the 0° ply direction is parallel to the length of the broadgoods roll or sheet, or tape.

Standard

Bar, Rod, and Shapes Produced from 12% Graphite - 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material

2021-05-19

CURRENT

AMS3670/3C

This specification covers molded or extruded bar, rod, and shapes produced from a polyamide-imide (PAI) polymer filled with 12% graphite and 3% polytetrafluoroethylene (PTFE). This is designated as Grade 3 material per AMS3670.

Standard

Bar, Rod, and Shapes Produced from 30% Glass Fiber Filled Polyamide-Imide (PAI) Material

2021-05-19

CURRENT

AMS3670/4D

This specification covers molded or extruded bar, rod, and shapes produced from a polyamide-imide (PAI) polymer filled with 30% glass fiber. This is designated as Grade 4 material per AMS3670.

Standard

Bars, Rods, and Shapes Produced from 30% Carbon Fiber Filled Polyamide-Imide (PAI) Material

2021-05-19

CURRENT

AMS3670/5D

This specification covers molded or extruded bar, rod, and shapes produced from a polyamide-imide polymer filled with 30% carbon fiber. This is designated as Grade 5 material per AMS3670.

Standard

Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material

2021-05-19

CURRENT

AMS3670/1C

This specification covers an unfilled polyamide-imide plastic in the form of molded or extruded bar, rod, and shapes. This is designated as Grade 2 material per AMS3670.

Standard

Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding

2007-09-05

HISTORICAL

AS4720

This SAE Aerospace Standard (AS) covers batch qualification procedure for virgin and compounded polytetrafluoroethylene (PTFE) resins used for compression molding. AS9100 requires virgin and modified PTFE as a testing material be representative of production PTFE and/or parts. The testing specified herein is limited to tensile strength, elongation and specific gravity. Any other tests required by the purchaser must be specified separately.

Standard

Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding

2013-11-06

CURRENT

AS4720A

This SAE Aerospace Standard (AS) covers batch qualification procedure for virgin and compounded polytetrafluoroethylene (PTFE) resins used for compression molding. AS9100 requires virgin and modified PTFE as a testing material be representative of production PTFE and/or parts. The testing specified herein is limited to tensile strength, elongation and specific gravity. Any other tests required by the purchaser must be specified separately.

Standard

CERAMIC MOLDINGS AND EXTRUSIONS Dense Ultra-High Alumina (99% Al2O3)

1962-01-01

HISTORICAL

AMS3870A

Standard

CERAMIC MOLDINGS AND EXTRUSIONS Dense Ultra-High Alumina (99% Al2O3)

1961-01-01

HISTORICAL

AMS3870

Standard

CERAMIC MOLDINGS AND EXTRUSIONS Dense, Ultra-High Alumina (99% Al2O3)

1993-01-01

HISTORICAL

AMS3870D

Standard

CLOTH, TYPE "E" GLASS, "B" STAGE POLYIMIDE-RESIN-IMPREGNATED 181 Style Fabric, High-Flow Addition-Cure Resin For Press Cure 40 - 100 psi (276 - 690 kPa) or Vacuum/Autoclave Processing

1992-01-01

HISTORICAL

AMS3845/2

This specification covers one type of glass cloth impregnated with a heat-reactive, addition-cure, thermosetting, polyimide-resin system, the resin to be supplied in a "B" stage condition for high flow and press cure at 40 - 100 psi (276 - 690 kPa) or vacuum/autoclave processing.

Standard

CLOTH, TYPE "E" GLASS, "B" STAGE POLYIMIDE-RESIN-IMPREGNATED 181 Style Fabric, High-Flow Addition-Cure Resin For Press Cure at 40 - 100 psi (275 - 690 kPa) or Vacuum/Autoclave Processing

1985-04-01

HISTORICAL

AMS3845/2A

This specification covers one type of glass cloth impregnated with a heat-reactive, addition-cure, thermosetting, polyimide-resin system, the resin to be supplied in a "B" stage condition for high flow and press cure at 40 - 100 psi (275 - 690 kPa) or vacuum/autoclave processing.

Standard

CORRUGATED FIBREBOARD (Double Wall)

1944-11-01

HISTORICAL

AMS3554

Standard

CRYSTALLIZED GLASS CERAMIC

1977-01-01

HISTORICAL

AMS3880A

This specification covers one type of crystallized glass ceramic in the form of cast and pressed shapes.

Standard

CRYSTALLIZED GLASS CERAMIC

2011-08-09

HISTORICAL

AMS3880B

This specification covers one type of crystallized glass ceramic in the form of cast and pressed shapes.

Standard

CRYSTALLIZED GLASS CERAMIC

1961-07-01

HISTORICAL

AMS3880

Standard

Cloth, Aramid Intermediate Modulus

2001-01-01

HISTORICAL

AMS3909A

This specification and its supplementary detail specifications cover an intermediate modulus aramid yarn in the form of cloth.

Standard

Crystallized Glass Ceramic

2016-06-29

CURRENT

AMS3880D

This specification covers one type of crystallized glass ceramic in the form of cast and pressed shapes.

Standard

ETHYLENE TETRAFLUOROETHYLENE (ETFE) EXTRUSIONS

1993-10-01

HISTORICAL

AMS3533B

This specification covers a melt-processible, copolymer resin of ethylene and tetrafluoroethylene (ETFE) in the form of extruded rods, tubes, and shapes.