Refine Your Search

Search Results

Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

1975-05-01
HISTORICAL
J709C_197505
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

1977-05-01
HISTORICAL
J709_197705
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

2009-08-17
CURRENT
J709_200908
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Application of Hydraulic Remote Control to Agricultural Tractors and Trailing Type Agricultural Implements

1991-03-01
HISTORICAL
J716_199103
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: 1 Up to 35kW 2 30 to 75 kW 3 Over 70 kW
Standard

Application of Hydraulic Remote Control to Agricultural Tractorsand Trailing Type Agricultural Implements

2003-05-15
CURRENT
J716_200305
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: This standard is the English translation of ISO 2057 dated 1981-11-15, except where indicated by a double asterisk (which indicates a change, an addition, or deletion) and the addition of SAE reference documents where applicable.
Standard

Auxiliary Power Take-Off Drives for Agricultural Tractors

1987-02-01
HISTORICAL
J717_198702
This SAE Standard establishes specifications for mid- and side-power take-off drives that will be helpful in designing implements. Design of the implement attaching means must be tailored to each tractor, depending on attaching points available and the exact location of the auxiliary shaft.
Standard

Auxiliary Power Take-Off Drives for Agricultural Tractors

1955-06-01
HISTORICAL
J717_195506
This SAE Standard establishes specifications for mid- and side-power take-off drives that will be helpful in designing implements. Design of the implement attaching means must be tailored to each tractor, depending on attaching points available and the exact location of the auxiliary shaft.
Standard

Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors

1992-09-01
CURRENT
J1041_199209
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
Standard

Drawbars--Agricultural Wheel Tractors

1989-05-01
HISTORICAL
J1548_198905
This SAE Standard provides dimensions and the vertical static load limits for drawbars of agricultural wheel type tractors.
Standard

Drawbars--Agricultural Wheel Tractors

1993-02-01
CURRENT
J1548_199302
This SAE Standard provides dimensions and the vertical static load limits for drawbars of agricultural wheel type tractors.
Standard

Front and Rear Power Take-Off for Agricultural Tractors

1977-05-01
HISTORICAL
J1170_197705
This SAE Standard establishes the specifications and dimensions that are essential in order that 540 r/min and 1000 r/min power take-off-driven machines may be operated with any make of tractor equipped with the corresponding power take-off drive. This document does not, in itself, insure adequate telescoping of the power line or safety shielding. This document provides dimensions relating to the tractor power take-off shield.
Standard

Front and Rear Power Take-Off for Agricultural Tractors

1991-06-01
HISTORICAL
J1170_199106
This SAE Standard establishes the specifications and dimensions that are essential in order that 540 r/min and 1000 r/min power take-off-driven machines may be operated with any make of tractor equipped with the corresponding power take-off drive. This document does not, in itself, insure adequate telescoping of the power line or safety shielding. This document provides dimensions relating to the tractor power take-off shield.
Standard

Front-Mounted Linkage for Agricultural Wheeled Tractors

1996-07-01
CURRENT
J2131_199607
This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.
Standard

Front-Mounted Linkage for Agricultural Wheeled Tractors

1992-10-17
HISTORICAL
J2131_199210
This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.
X