Refine Your Search

Topic

Search Results

Standard

Cantilevered Boom Crane Structures - Method of Test

2019-09-24
WIP
J1063
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type (Figure 1). Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee.
Standard

Crane Boom Hoist Disengaging Device

2017-08-15
WIP
J999
This SAE Standard applies to cranes which are equipped to adjust the boom angle by hoisting and lowering means through rope reeving. The purpose of this standard is to define the function and to stipulate the requirements of an automatic device to prevent raising a variable angle boom above its highest specified angle.
Standard

Crane Load Stability Test Code

1961-04-01
HISTORICAL
J765_196104
This SAE Standard may be used for all revolving cranes wherein the capacity of the crane to support loads is based on its resistance to overturning. it is not applicable to cranes wherein the capacity of the crane is based on structural strength or available hoisting power. The purpose of this test is to determine the maximum capacity of a crane to counterbalance loads applied on its hook block. The capacity of the crane is reported in terms of the load in kilograms (pounds) and its corresponding radius in meters (feet) for a specified position of the upperstructure with respect to the mounting.
Standard

Crane Load Stability Test Code

1969-02-01
HISTORICAL
J765_196902
This SAE Standard may be used for all revolving cranes wherein the capacity of the crane to support loads is based on its resistance to overturning. it is not applicable to cranes wherein the capacity of the crane is based on structural strength or available hoisting power. The purpose of this test is to determine the maximum capacity of a crane to counterbalance loads applied on its hook block. The capacity of the crane is reported in terms of the load in kilograms (pounds) and its corresponding radius in meters (feet) for a specified position of the upperstructure with respect to the mounting.
Standard

Crane Load Stability Test Code

1969-02-01
HISTORICAL
J765A_196902
This SAE Standard may be used for all revolving cranes wherein the capacity of the crane to support loads is based on its resistance to overturning. it is not applicable to cranes wherein the capacity of the crane is based on structural strength or available hoisting power. The purpose of this test is to determine the maximum capacity of a crane to counterbalance loads applied on its hook block. The capacity of the crane is reported in terms of the load in kilograms (pounds) and its corresponding radius in meters (feet) for a specified position of the upperstructure with respect to the mounting.
Standard

Crane and Cable Excavator Basic Operating Control Arrangements

2016-12-07
WIP
J983
This SAE Recommended Practice applies to mobile, construction type, crane and cable excavator hand and foot controls. It should not be construed to limit the use of, or to apply to combination controls, automatic controls, or any other special operating control requirements.
Standard

Lifting Crane Sheave and Drum Sizes

2019-01-16
WIP
J881
This SAE Standard covers minimum dimensional relationship for sheaves, drums, and wire rope for mobile, construction type lift cranes.
Standard

Lifting Crane Sheave and Drum Sizes

1964-04-01
HISTORICAL
J881_196404
This SAE Standard covers minimum dimensional relations for sheaves, drums, and wire rope for mobile, construction type lift cranes.
Standard

Lifting Crane, Wire-Rope Strength Factors

2012-06-04
CURRENT
J959_201206
This SAE Standard applies to all mobile, construction-type, lifting cranes as equipped for operation with hook, clamshell, magnet, and grapple attachments. It is not applicable to excavating and demolition attachments such as shovels, hoes, draglines, and wrecking balls. The purpose of this document is to set forth wire-rope strength factors that have been proved by design and operating practice to be consistent with safety, economy, space, weight, and other requirements peculiar to mobile, construction-type, lifting cranes.
Standard

Load Indicating Devices in Lifting Crane Service

1974-10-01
HISTORICAL
J376A_197410
The purpose of this recommended practice is to establish the minimum performance criteria for systems used to measure and display to the operator, and/or other responsible persons, the weight of the load being lifted. It is not the intent of this recommended practice to define the requirements and use of weight measuring devices used in commerce or other industries. This SAE Recommended Practice applies to cranes equipped with load indicating devices used in lifting crane service.
Standard

Load Indicating Devices in Lifting Crane Service

1980-02-01
HISTORICAL
J376_198002
The purpose of this recommended practice is to establish the minimum performance criteria for systems used to measure and display to the operator, and/or other responsible persons, the weight of the load being lifted. It is not the intent of this recommended practice to define the requirements and use of weight measuring devices used in commerce or other industries. This SAE Recommended Practice applies to cranes equipped with load indicating devices used in lifting crane service.
Standard

Mobile Crane Stability Ratings

2013-03-28
CURRENT
J1289_201303
To establish conditions to be taken into consideration in determining rated loads for mobile cranes when overturning stability is the controlling factor. This recommended practice applies to mobile, construction-type lifting cranes with either lattice booms or cantilevered, telescopic booms.
Standard

Mobile Crane Working Area Definitions

2017-08-16
WIP
J1028
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Mobile Crane Working Area Definitions

1980-08-01
HISTORICAL
J1028_198008
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Mobile Crane Working Area Definitions

1980-10-01
HISTORICAL
J1028_198010
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Rated Capacity System

1994-04-01
HISTORICAL
J159_199404
This SAE Recommended Practice applies to cranes when used in lifting-crane service which are equipped with load moment devices. The purpose of this document is to establish the minimum performance criteria of systems used to warn or indicate to the operator and/or other responsible persons when the load being lifted approaches and meets the rated load value on the applicable load-rating chart of the crane.
Standard

Rated Capacity Systems

2012-03-06
WIP
J159
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
Standard

Rated Capacity Systems

1985-04-01
HISTORICAL
J159_198504
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems. Purpose The purpose of this document is to establish the minimum performance and tolerance criteria of systems used to warn or to indicate to the operator and/or other responsible persons when the load being lifted approaches, meets and exceeds the rated capacity on the applicable rated capacity chart of the crane.
X