Refine Your Search

Date

Date

Fuels and Energy Sources Spark ignition engines Certification Tests and Testing Containers Diesel Fuel Injection Equipment Standards Committee

Search Results

Viewing 1 to 20 of 41
123Next >Last >>
Sort by title
Standard

CALIBRATING FLUID FOR DIESEL FUEL INJECTION SYSTEMS
1975-10-01
HISTORICAL
J967C_197510
This SAE Recommended Practice defines the requirements of a calibrating fluid recommended for the flow bench testing, calibration, and flushing of fuel injection equipment, both in the laboratory and at service establishments.
Standard

CALIBRATION FLUID FOR DIESEL INJECTION EQUIPMENT
1988-09-01
HISTORICAL
J967_198809
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

Calibration Fluid for Diesel Injection Equipment
2002-08-29
HISTORICAL
J967_200208
This SAE Standard defines the requirements of a calibration fluid recommended for flow bench testing, calibration, and flushing of fuel injection equipment, in production facilities, in laboratories, and in service establishments.
Standard

DIESEL ENGINES—DIESEL FUEL—PERFORMANCE REQUIREMENT AND TEST METHOD FOR ASSESSING FUEL LUBRICITY
1995-06-01
HISTORICAL
J2265_199506
This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.
Standard

DIESEL FUEL INJECTION PUMP—VALIDATION OF CALIBRATING NOZZLE HOLDER ASSEMBLIES
1988-04-01
HISTORICAL
J1549_198804
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard

DIESEL FUEL INJECTOR ASSEMBLY - FLANGE MOUNTED TYPES 5 AND 6
1991-04-01
HISTORICAL
J629_199104
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE (9.5 MM)
1995-07-10
HISTORICAL
J347_199507
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 27 (9.5 mm)
1989-11-01
HISTORICAL
J1984_198911
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 28 (9.5 MM)
1995-11-01
HISTORICAL
J1984_199511
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 7 (9.5 mm)
1988-07-01
HISTORICAL
J347_198807
This standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard

DIESEL FUEL INJECTOR ASSEMBLY—TYPES 8, 9, 10, AND 11
1991-04-01
HISTORICAL
J265_199104
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.
Standard

Diesel Engines - Diesel Fuel – Performance Requirement and Test Method for Assessing Fuel Lubricity
2015-11-24
CURRENT
J2265_201511
This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.
Standard

Diesel Engines - Fuel Injection Pump Testing
2016-05-10
HISTORICAL
J1668_201605
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines - Fuel Injection Pump Testing
2021-03-17
CURRENT
J1668_202103
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines—Fuel Injection Pump Testing
1999-04-16
HISTORICAL
J1668_199904
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard

Diesel Engines—Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
2002-10-25
HISTORICAL
J1958_200210
This SAE Standard specifies dimensions and requirements for single-wall steel tubing intended for use as high-pressure fuel injection pipes on a wide range of engines (Class A), and for fuel injection pump testing (Class B, Reference SAE J1418). Tubing shall be cold drawn, annealed or normalized, seamless tubing suitable for cold swaging, cold upsetting, and cold bending.
123Next >Last >>
X