Refine Your Search

Search Results

Viewing 1 to 11 of 11
Standard

Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses-Test Methods and General Performance Requirements

1998-03-01
HISTORICAL
J1742_199803
This SAE REcommended practice defines recommended test methods and general performance requirements of single-pole and multi-pole connectors for on-board electrical wiring harnesses of electric or hybrid powered road vehicles operating at voltages between 50 and 600 V AC or DC rms and those circuits using copper wire only. these requireemnts are not intended for connections internal to electrical/electronic modules or complete subassemblies. this document applies to connectors designed to be disconnected in the case of repair and/or maintenance after mounting in the vehicle. This document excludes onoe-part connections, i.e., where one part of the connection has direct contact to the pattern of the circuit board. Duty cycles are considered to be application specific and are not specified in this document; however, these effects must be considered during design. The Recommended Practice for Highvoltage Wiring Assembly is contained in SAE j1673.
Standard

Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements

2005-12-01
HISTORICAL
J1742_200512
This SAE REcommended practice defines recommended test methods and general performance requirements of single-pole and multi-pole connectors for on-board electrical wiring harnesses of electric or hybrid powered road vehicles operating at voltages between 50 and 600 V AC or DC rms and those circuits using copper wire only. these requireemnts are not intended for connections internal to electrical/electronic modules or complete subassemblies. this document applies to connectors designed to be disconnected in the case of repair and/or maintenance after mounting in the vehicle. This document excludes onoe-part connections, i.e., where one part of the connection has direct contact to the pattern of the circuit board. Duty cycles are considered to be application specific and are not specified in this document; however, these effects must be considered during design. The Recommended Practice for Highvoltage Wiring Assembly is contained in SAE j1673.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 1: Single-Pole Connectors - Flat Blade Terminals - Dimensional Characteristics and Specific Requirements

1998-12-01
HISTORICAL
J2223/1_199812
This SAE Standard specifies dimensional characteristics of flat blades of single-pole connectors and specific requirements for on-board electrical harnesses of road vehicles, which can be fitted into female connectors such as those given as in Appendix A. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 2: Tests and General Performance Requirements

1998-12-01
HISTORICAL
J2223/2_199812
This SAE Standard defines tests methods and general performance requirements of single-pole and multiple connectors for on-board electrical wiring harnesses of road vehicles. These requirements are not intended for connections internal to electronic devices. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 3: Multipole Connectors - Flat Blade Terminals - Dimensional Characteristics and Specific Requirements

1998-12-01
HISTORICAL
J2223/3_199812
This SAE Standard defines dimensional characteristics of existing flat blades of multipole connectors and specific requirements for on-board electrical harnesses of road vehicles. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 1: Single-Pole Connectors Flat Blade Terminals Dimensional Characteristics and Specific Requirements

2003-10-28
HISTORICAL
J2223/1_200310
This SAE Standard specifies dimensional characteristics of flat blades of single-pole connectors and specific requirements for on-board electrical harnesses of road vehicles, which can be fitted into female connectors such as those given as in Appendix A. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 2: Tests and General Performance Requirements

2003-10-28
HISTORICAL
J2223/2_200310
This SAE Standard defines tests methods and general performance requirements of single-pole and multiple connectors for on-board electrical wiring harnesses of road vehicles. These requirements are not intended for connections internal to electronic devices. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 3: Multipole Connectors Flat Blade Terminals Dimensional Characteristics and Specific Requirements

2003-10-28
HISTORICAL
J2223/3_200310
This SAE Standard defines dimensional characteristics of existing flat blades of multipole connectors and specific requirements for on-board electrical harnesses of road vehicles. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 1: Single-Pole Connectors--Flat Bladeterminals--Dimensional Characteristics and Specific Requirements

1994-02-01
HISTORICAL
J2223/1_199402
This SAE Draft Technical Report specifies dimensional characteristics of flat blades of single-pole connectors and specific requirements for on-board electrical harnesses of road vehicles, which can be fitted into female connectors such as those given as in Appendix A. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements

1994-02-01
HISTORICAL
J2223/2_199402
This SAE Draft Technical Report defines tests methods and general performance requirements of single-pole and multiple connectors for on-board electrical wiring harnesses of road vehicles. These requirements are not intended for connections internal to electronic devices. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance.
Standard

Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 3: Multipole Connectors--Flat Blade Terminals--Dimensional Characteristics and Specific Requirements

1994-02-01
HISTORICAL
J2223/3_199402
This SAE Draft Technical Report defines dimensional characteristics of existing flat blades of multipole connectors and specific requirements for on-board electrical harnesses of road vehicles. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
X