Search Results

Standard

CONICAL SPRING WASHERS

1998-05-01

HISTORICAL

J773_199805

This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general purpose conical spring washers, designated type L and type H, for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.

Standard

Conical Spring Washers

2016-08-31

CURRENT

J773_201608

This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general purpose conical spring washers, designated type L and type H, for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

1974-09-01

HISTORICAL

J995C_197409

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes ¼ to 1½ in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J104.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

1979-06-01

HISTORICAL

J995_197906

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes ¼ to 1 ½ in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J104.

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR MACHINE SCREWS

1979-06-01

HISTORICAL

J82_197906

This SAE Standard covers the mechanical and quality requirements for two grades of carbon steel, slotted and recessed, 82 deg flat countersunk, 82 deg oval countersunk, pan, fillister, hex, and hex washer head machine screws in sizes No. 4 through ¾ in, for use in automotive and related industries. The dimensions of these screws are covered in SAE J478.

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS

1979-06-01

HISTORICAL

J933_197906

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in SAE J478.)

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS

1965-07-01

HISTORICAL

J933_196507

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. It is intended to cover only tapping screws of the type and dimensions covered in SAE J478. Requirements for other types of tapping screws are not covered in this recommended practice. The primary objective of the specification is to insure that screws form or cut mating threads in materials of construction into which they are normally driven, without deforming their own thread and without breaking during assembly or service.

Standard

Mechanical and Material Requirements for Metric Wheel Bolts

2013-04-11

HISTORICAL

J1102M_201304

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for two types of passenger car and truck wheel bolts, as follows: a Nonserrated shank bolts which are heat treated b Serrated shank bolts which are case hardened

Standard

Mechanical and Material Requirements for Metric Wheel Bolts

2016-11-18

CURRENT

J1102M_201611

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for two types of passenger car and truck wheel bolts, as follows: a Nonserrated shank bolts which are heat treated b Serrated shank bolts which are case hardened

Standard

Mechanical and Material Requirements for Steel Nuts

2021-02-08

WIP

J995

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 inches, inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 or ASME B18.2.2, except for machine screw nuts which are not covered in this standard. This document does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For sizes 1/4 through 1 inch, this may be done by the statement: “Surface discontinuities shall not exceed the limits specified in ASTM F812/F812M.”

Standard

Mechanical and Material Requirements for Steel Nuts

1999-07-01

HISTORICAL

J995_199907

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 in, inclusive, and with dimensions conforming with the requirements of the latest issue of ASME B18.2.2 or ASME B18.6.3, as applicable.

Standard

Mechanical and Material Requirements for Steel Nuts

2012-02-21

HISTORICAL

J995_201202

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 in, inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 or ASME B18.2.2, except for machine screw nuts which are not covered in this standard. This document does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For sizes 1/4 through 1 in, this may be done by the statement: “Surface discontinuities shall not exceed the limits specified in ASTM F812/F812M.”

Standard

Mechanical and Material Requirements for Steel Nuts

2017-07-20

CURRENT

J995_201707

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 inches, inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 or ASME B18.2.2, except for machine screw nuts which are not covered in this standard. This document does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For sizes 1/4 through 1 inch, this may be done by the statement: “Surface discontinuities shall not exceed the limits specified in ASTM F812/F812M.”

Standard

Mechanical and Material Requirements for Wheel Bolts

2013-04-11

HISTORICAL

J1102_201304

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for two types of passenger car and truck wheel bolts, as follows: a Nonserrated shank bolts which are heat treated b Serrated shank bolts which are case hardened

Standard

Mechanical and Material Requirements for Wheel Bolts

2016-11-21

CURRENT

J1102_201611

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for two types of passenger car and truck wheel bolts, as follows: a Nonserrated shank bolts which are heat treated b Serrated shank bolts which are case hardened

Standard

Mechanical and Quality Requirements for Tapping Screws

1998-05-01

HISTORICAL

J933_199805

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in SAE J478.)

Standard

Mechanical and Quality Requirements for Tapping Screws

2005-08-29

HISTORICAL

J933_200508

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in ASME B 18.6.4, ‘Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws’.)

Standard

Mechanical and Quality Requirements for Tapping Screws

2013-02-25

CURRENT

J933_201302

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in ASME B 18.6.4, Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws’.)

Standard

Metric Thread Rolling Screws

2017-09-07

HISTORICAL

J1237_201709

This SAE Standard covers material, dimensional, performance and test requirements for metric thread rolling screws suitable for use in general engineering applications.

Standard

Metric Thread Rolling Screws

2001-03-12

HISTORICAL

J1237_200103

This SAE Standard covers requirements for metric thread rolling screws suitable for use in general engineering applications.