Search Results

Standard

CONICAL SPRING WASHERS

1998-05-01

HISTORICAL

J773_199805

This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general purpose conical spring washers, designated type L and type H, for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.

Standard

Conical Spring Washers

2016-08-31

CURRENT

J773_201608

This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general purpose conical spring washers, designated type L and type H, for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.

Standard

MECHANICAL AND CHEMICAL REQUIREMENTS FOR NONTHREADED FASTENERS CARBON STEEL SOLID RIVETS

1998-05-01

HISTORICAL

J430_199805

These specifications cover the mechanical and chemical requirements for carbon steel solid rivets used in automotive and other related industries.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

1974-09-01

HISTORICAL

J995C_197409

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes ¼ to 1½ in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J104.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

1979-06-01

HISTORICAL

J995_197906

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes ¼ to 1 ½ in., inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J104.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR WHEEL BOLTS

1974-10-01

HISTORICAL

J1102_197410

This SAE Standard covers the chemical, metallurgical and mechanical requirements for two types of passenger car and truck wheel bolts, as follows: (a) Nonserrated shank bolts which are heat treated (b) Serrated shank bolts which are case hardened

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS

1979-06-01

HISTORICAL

J933_197906

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered in SAE J478.)

Standard

MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS

1965-07-01

HISTORICAL

J933_196507

This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. It is intended to cover only tapping screws of the type and dimensions covered in SAE J478. Requirements for other types of tapping screws are not covered in this recommended practice. The primary objective of the specification is to insure that screws form or cut mating threads in materials of construction into which they are normally driven, without deforming their own thread and without breaking during assembly or service.

Standard

Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets - Inch Series

2016-11-21

CURRENT

J430_201611

These specifications cover the mechanical and chemical requirements, and surface discontinuities limits for carbon steel solid rivets used in automotive and other related industries.

Standard

Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets - Inch Series

2013-04-15

HISTORICAL

J430_201304

These specifications cover the mechanical and chemical requirements, and surface discontinuities limits for carbon steel solid rivets used in automotive and other related industries.

Standard

Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets—Inch Series

2007-07-11

HISTORICAL

J430_200707

These specifications cover the mechanical and chemical requirements, and surface discontinuities limits for carbon steel solid rivets used in automotive and other related industries.

Standard

Mechanical and Material Requirements for Steel Nuts

2021-02-08

WIP

J995

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 inches, inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 or ASME B18.2.2, except for machine screw nuts which are not covered in this standard. This document does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For sizes 1/4 through 1 inch, this may be done by the statement: “Surface discontinuities shall not exceed the limits specified in ASTM F812/F812M.”

Standard

Mechanical and Material Requirements for Steel Nuts

1999-07-01

HISTORICAL

J995_199907

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 in, inclusive, and with dimensions conforming with the requirements of the latest issue of ASME B18.2.2 or ASME B18.6.3, as applicable.

Standard

Mechanical and Material Requirements for Steel Nuts

2012-02-21

HISTORICAL

J995_201202

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 in, inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 or ASME B18.2.2, except for machine screw nuts which are not covered in this standard. This document does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For sizes 1/4 through 1 in, this may be done by the statement: “Surface discontinuities shall not exceed the limits specified in ASTM F812/F812M.”

Standard

Mechanical and Material Requirements for Steel Nuts

2017-07-20

CURRENT

J995_201707

This SAE Standard covers the mechanical and material requirements for three grades of steel nuts suitable for use in automotive and related engineering applications, in sizes 1/4 to 1-1/2 inches, inclusive, and with dimensions conforming with the requirements of the latest issue of SAE J482 or ASME B18.2.2, except for machine screw nuts which are not covered in this standard. This document does not include limits for surface discontinuities. Where usage requires such control, limits may be specified separately. For sizes 1/4 through 1 inch, this may be done by the statement: “Surface discontinuities shall not exceed the limits specified in ASTM F812/F812M.”

Standard

Nut and Conical Spring Washer Assemblies

2017-05-30

CURRENT

J238_201705

This SAE Standard covers general, dimensional data, and methods of test for two types of general purpose nut and conical spring washer assemblies, designated Type LN and Type HN, intended for mass production and other operations where speed and convenience are paramount factors.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1979-06-01

HISTORICAL

J78_197906

This standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1973-10-01

HISTORICAL

J78B_197310

This standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1972-07-01

HISTORICAL

J78_197207

This standard covers the dimensional and general specifications, including performance requirements, for steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly or service. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.

Standard

Surface Discontinuities on Nuts

2017-01-04

CURRENT

J122_201701

This SAE Recommended Practice defines, illustrates, and specifies allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts, in sizes 6.3 to 25 mm and inch-series nuts in sizes 1/4 to 1 in, inclusive, which are primarily intended for use in automotive assemblies.