Refine Your Search

Date

Date

Topic

Topic

Technical review Filter Test Methods Standards Committee Corrosion Vegetable oils Fuel systems Metals

Search Results

Viewing 1 to 20 of 39
12Next >Last >>
Sort by title
Standard

Coarse Droplet Water/Fuel Separation Test Procedure
2010-10-20
CURRENT
J1839_201010
To determine the undissolved water removal performance of a fuel/water separator under controlled laboratory conditions, using water droplets. This test method is applicable for diesel and biodiesel fuel.
Standard

Emulsified Water/Fuel Separation Test Procedure
2010-10-22
CURRENT
J1488_201010
To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels. This test method is applicable for biodiesel fuel.
Standard

FILTER BASE MOUNTING
1987-02-01
HISTORICAL
J363_198702
This SAE Recommended Practice identifies the necessary dimensional characteristics of filter base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE Recommended Practice is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.
Standard

FILTER BASE MOUNTING
1980-02-01
HISTORICAL
J363_198002
This SAE Recommended Practice identifies the necessary dimensional characteristics of filter base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters.
Standard

FILTER-BASE MOUNTING
1994-09-26
HISTORICAL
J363_199409
This SAE Recommended Practice identifies the necessary dimensional characteristics of filter-base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE document is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.
Standard

FUEL FILTER TEST METHODS
1987-07-01
HISTORICAL
J905_198701
The resistance to flow test determines the pressure loss which will result when standard test fluid is passed through the filter under standard conditions of flow and fluid viscosity. This procedure may be used to establish flow capacities, and is the method for measuring resistance to flow of sample filters against an established performance standard.
Standard

FUEL FILTERS—INITIAL SINGLE-PASS EFFICIENCY TEST METHOD
1993-10-01
HISTORICAL
J1985_199310
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.
Standard

FULL FLOW LUBRICATING OIL FILTERS MULTIPASS METHOD FOR EVALUATING FILTRATION PERFORMANCE
1988-06-01
HISTORICAL
J1858_198806
This standard establishes a multipass filtration performance test with continuous contaminant injection for lubricating oil filter elements. It also includes a procedure for determining the contaminant capacity, particulate removal characteristics, and pressure loss. It also includes a test currently applicable to lubricating oil filter elements which exhibit a 10 μm filtration ratio of less than 75 and a rated flow between 4 and 600 L/min. This standard provides a test procedure which yields reproducible test data for evaluating the filtration performance of a lubricating oil filter element.
Standard

Filter-Base Mounting
2012-05-29
CURRENT
J363_201205
This SAE Recommended Practice identifies the necessary dimensional characteristics of filter-base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE document is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.
Standard

Fuel Dispensing Filter Test Methods
2020-05-26
CURRENT
J2793_202005
This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.
12Next >Last >>
X