Refine Your Search

Topic

Search Results

Standard

A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems

2000-10-01
HISTORICAL
AIR1047D
The factors involved in the selection of a quick-disconnect are grouped into the following classifications for the purpose of discussion: a Functional considerations. b Weight considerations. c Environmental performance factors. d End fitting types. e Additional considerations. A quick-disconnect coupling as used in this AIR is one that can be rapidly and repetitively connected and disconnected without excessive fluid loss. The relative importance of the design factors depends upon the fluid medium of the particular system in which quick-disconnect is to be used. The effect of the fluid media on each factor is discussed in this report where applicable.
Standard

AGE CONTROLS FOR HOSE CONTAINING AGE-SENSITIVE ELASTOMERIC MATERIAL

1988-01-01
HISTORICAL
AS1933
This document establishes age limits for acceptance of hose and hose assemblies containing elastomeric materials for use in aircraft, space vehicles, missiles and component assemblies thereof at time of delivery to the contractor, procuring activity, or contracting officer. This document does not establish limitations on storage times for military activities nor operating life.
Standard

AS5177 Cap Assy

2008-03-08
WIP
AS5177A
Prepare AS replacement standard for MIL-F-5509 flared fitting
Standard

Age Controls for Hose Containing Age-Sensitive Elastomeric Material

1998-11-01
CURRENT
AS1933A
This document establishes age limit and guidance for acceptance of hose and hose assemblies containing elastomeric materials for use in aircraft, space vehicles, missiles and component assemblies thereof at time of delivery to the contractor, procuring activity, or contracting officer. This document does not establish limitations on storage times for military/civil activities nor operating life.
Standard

Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10 340 kPa) Maximum, Specification for

2011-11-09
HISTORICAL
AS6116
This SAE Aerospace Standard (AS) establishes the requirements for externally swaged aluminum tube fittings on aluminum tubing with flareless separable fitting ends for use in hydraulic supply and return aerospace fluid systems including pneumatic, coolants, and fire extinguishers up to a maximum operating pressure of 1500 psig (10 340 kPa) and a maximum operating temperature range of −65 to +225 °F (−54 to +107 °C). This specification covers a common aluminum fitting that may be used for a range of operating pressures up to 1500 psi with different tubing materials and tubing wall thicknesses, and is assembled with the same tooling in accordance with AS6124. Table 12 shows applicable aerospace fitting part number standard and tubing materials and operating pressures.
Standard

Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for

2016-10-17
CURRENT
AS6116A
This SAE Aerospace Standard (AS) establishes the requirements for externally swaged aluminum tube fittings on aluminum tubing with flareless separable fitting ends for use in hydraulic supply and return aerospace fluid systems including pneumatic, coolants, and fire extinguishers up to a maximum operating pressure of 1500 psig (10340 kPa) and a maximum operating temperature range of -65 to +225 °F (-54 to +107 °C). This specification covers a common aluminum fitting that may be used for a range of operating pressures up to 1500 psi with different tubing materials and tubing wall thicknesses, and is assembled with the same tooling in accordance with AS6124. Table 12 shows applicable aerospace fitting part number standard and tubing materials and operating pressures.
Standard

Clamp Loads and Bending Stresses in Aircraft Tubing Installations

2020-10-09
CURRENT
AIR1593A
This SAE Aerospace Information Report (AIR) contains information relative to stresses and loads developed in tubes caused by tube deflections encountered in misaligned installations. Users are advised that when calculating the stresses and loads of a tubing system, the yield strength of existing loop clamp material is significantly lower than the tubing materials specified herein and should be considered.
Standard

Clamp Selection and Installation Guide

2019-05-20
CURRENT
ARP1897A
This document is prepared as an aid in the selection of clamping devices and their use in aerospace equipment for the installation and support of tubing and wiring. For recommended installation practices, refer to ARP994.
Standard

Clamp Selection and Installation Guide

1990-02-21
HISTORICAL
ARP1897
This document is prepared as an aid in the selection of clamping devices and their use in aerospace equipment for the installation and support of tubing and wiring.
Standard

FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS

1993-04-01
HISTORICAL
AIR1418
This information report presents flexure fatigue strength of tube fitting joints in the form of graphs showing applied deflection D and total calculated axial stress S vs. number of cycles to failure N. The graphs have been prepared from data obtained by actual testing conducted in accordance with ARP 1185.
X