Search Results

The scope of this document is to clearly lay out the path for an organization to implement a CBM approach to maintenance. The practices will include both CBM in design and in the support phase for fielded equipment.

This Surface Vehicle & Aerospace Recommended Practice offers best practices and a methodology by which IVHM functionality relating to components and subsystems should be integrated into vehicle or platform level applications. The intent of the document is to provide practitioners with a structured methodology for specifying, characterizing and exposing the inherent IVHM functionality of a component or subsystem using a common functional reference model, i.e., through the exchange of design-time data and the application of standard vehicle data communications interfaces. This document includes best practices and guidance related to the specification of the information that must be exchanged between the functional layers in the IVHM system or between lower-level components/subsystems and the higher-level control system to enable health monitoring and tracking of system degradation severity.

This Surface Vehicle & Aerospace Recommended Practice offers best practices and a methodology by which IVHM functionality relating to components and subsystems should be integrated into vehicle or platform level applications. The intent of the document is to provide practitioners with a structured methodology for specifying, characterizing and exposing the inherent IVHM functionality of a component or subsystem using a common functional reference model, i.e., through the exchange of design-time data and the application of standard vehicle data communications interfaces. This document includes best practices and guidance related to the specification of the information that must be exchanged between the functional layers in the IVHM system or between lower-level components/subsystems and the higher-level control system to enable health monitoring and tracking of system degradation severity.

This ARP provides insights on how to perform a cost benefit analysis (CBA) to determine the return on investment that would result from implementing an integrated Health Management (HM) system on an air vehicle. The word “integrated” refers to the combination or “roll up” of sub-systems health management tools to create a platform centric system. The document describes the complexity of features that can be considered in the analysis, the different tools and approaches for conducting a CBA and differentiates between military and commercial applications. This document is intended to help those who might not necessarily have a deep technical understanding or familiarity with HM systems but want to either quantify or understand the economic benefits (i.e., the value proposition) that a HM system could provide.

This Aerospace Recommended Practice (ARP) provides insights on how to perform a cost versus benefit (C/B) analysis (CBA) to determine the return on investment that would result from implementing an integrated health management (HM) system on an air vehicle. The word “integrated” refers to the combination or “roll up” of sub-systems health management tools to create a platform-centric system. This document describes the complexity of features that can be considered in the analysis and the different tools and approaches for conducting a CBA, and it differentiates between military and commercial applications. This document is intended to help those who might not have a deep technical understanding or familiarity with HM systems but want to either quantify or understand the economic benefits (i.e., the value proposition) that an HM system could provide.

This document delineates a recommended practice specifically designed for maintenance processes that involve more than one aviation maintenance stakeholders. These include (but are not limited to) Manufacturers, Operators, Maintenance Repair & Overhaul (MRO) organization and Part Providers. The framework's primary aim is to establish the necessary input for evaluating and accepting (or rejecting) implementing a prognostic model based on their impact from the unique perspective of each stakeholder. As a result, this document is best suited for maintenance processes involving Line-Replaceable Units (LRUs), as these system enter a repair process that involved multiple parties external to the airline operator. This document emphasizes economic efficiency in maintenance operations, targeting tasks that are currently managed on a corrective (or run-to-failure) basis outside of the Airline Maintenance Program.

This Aerospace Informational Report (AIR) provides guidance on using environmental, electrochemical, and electrical resistance measurements to monitor environment spectra and corrosivity of service environments, focusing on parameters of interest, existing measurement platforms, deployment requirements, and data processing techniques. The sensors and monitoring systems provide discrete time-based records of 1) environmental parameters such as temperature, humidity, and contaminants; 2) measures of alloy corrosion in the sensor; and 3) protective coating performance in the sensor. These systems provide measurements of environmental parameters, sensor material corrosion rate, and sensor coating condition for use in assessing the risk of atmospheric corrosion of the structure.

This SAE Aerospace Recommended Practice (ARP) provides guidance when creating integrated vehicle health management (IVHM) system architecture. IVHM covers a vehicle’s monitoring and data processing functions inherent within its sub-systems, and the tools and processes used to manage and restore the vehicle health. These guidelines are drawn from experience within both defense and commercial IVHM initiatives and implementations. The document identifies a step-by-step methodology to expose functional and non-functional requirements, mature the architecture and support organizational business goals and objectives.

This recommended practice applies to vibration monitoring systems for rotorcraft and fixed-wing drive trains, airframes, propulsion systems, electric power generators, and flight control systems. It addresses all aspects of metrics, including what to measure, how to measure, and how to evaluate the results.

Accelerometers are transducers, or sensors, that convert acceleration into an electrical signal which can be used for vibration monitoring and analysis. This document defines interface requirements for accelerometers and associated interfacing electronics for use in a helicopter Health and Usage Monitoring System (HUMS). The purpose is to standardize the accelerometer-to-electronics interface with the intent of increasing interchangeability among HUMS sensors/systems and reducing the cost of HUMS accelerometers. Although this interface was specified with an internally amplified piezoelectric accelerometer in mind, this does not preclude the use of any other sensor technology that meets the requirements given in this specification. These SAE HUMS Interface Specifications include the minimal interface and performance requirements for interoperability with the Rotorcraft Industry Technology Association (RITA) compliant HUMS.

This document specifies a multipoint, digital, serial interface that incorporates other interface standards such as EIA-485 and the nine bit interrupt mode of many microcontrollers. Standardized interfaces are critical to the development of an "open" HUMS architecture.

This document specifies a multipoint, digital, serial interface that incorporates other interface standards such as EIA-485 and the nine bit interrupt mode of many microcontrollers. Standardized interfaces are critical to the development of an "open" HUMS architecture.

This document establishes the Rotorcraft Industry Technology Association (RITA) Health and Usage Monitoring System Data Interchange Specification. The RITA HUMS Data Interchange Specification will provide information exchange within a rotorcraft HUMS and between a rotorcraft HUMS and external entities.

This SAE Aerospace Standard (AS) specifies requirements for the interface between a rotational system indexing sensor and its interface electronics. These sensors generate one or more electrical pulses for each revolution of the shaft being monitored. These pulses can be used to determine the actual shaft rotational speed and/or position for use in a Health and Usage Monitoring System (HUMS). Indexing sensors are used in the following HUMS areas on the aircraft: (a) rotor track and balance, (b) engine vibration monitoring and diagnostics, (c) drive train vibration monitoring and diagnostics. The goal of this standardization effort is to be able to take any compliant indexing sensor and connect it to any compliant interface electronics. These SAE HUMS Interface Specifications include the minimal interface and performance requirements for interoperability with the Rotorcraft Industry Technology Association (RITA) compliant HUMS.

This SAE Aerospace Standard (AS) specifies requirements for the interface between a rotational system indexing sensor and its interface electronics. These sensors generate one or more electrical pulses for each revolution of the shaft being monitored. These pulses can be used to determine the actual shaft rotational speed and/or position for use in a Health and Usage Monitoring System (HUMS). Indexing sensors are used in the following HUMS areas on the aircraft: (a) rotor track and balance, (b) engine vibration monitoring and diagnostics, (c) drive train vibration monitoring and diagnostics. The goal of this standardization effort is to be able to take any compliant indexing sensor and connect it to any compliant interface electronics. These SAE HUMS Interface Specifications include the minimal interface and performance requirements for interoperability with the Rotorcraft Industry Technology Association (RITA) compliant HUMS.

Accelerometers are transducers, or sensors, that convert acceleration into an electrical signal that can be used for airframe, drive, and propulsion system vibration monitoring and analysis within vehicle health and usage monitoring systems. This document defines interface requirements for accelerometers and associated interfacing electronics for use in a helicopter Health and Usage Monitoring System (HUMS). The purpose is to standardize the accelerometer-to-electronics interface with the intent of increasing interchangeability among HUMS sensors/systems and reducing the cost of HUMS accelerometers. Although this interface was specified with an internally amplified piezoelectric accelerometer in mind for Airframe and Drive Train accelerometers, this does not preclude the use of piezoelectric accelerometer with remote charge amplifier or any other sensor technology that meets the requirements given in this specification.

Reducing the power consumption—and hence, the fuel burn—is a major target for the next generation of aircraft, and electrical actuation is perceived as a technological area able to provide power saving. Electrical actuation can in fact contribute to the reduction of the non-propulsive power because electro-mechanical actuators, when compared to the conventional hydraulic actuators, rely on a form of power subjected to lower distribution losses and in general can lead to a weight savings at the aircraft level if the required power remains under a break-over point. Moreover, electro-mechanical actuators (EMAs) present higher reliability and maintainability with a lower life-cycle cost.

To establish a specification for software input and output interfaces for condition monitoring and performance programs used to monitor equipment from multiple manufacturers. The purpose of standardizing these interfaces is to improve operational flexibility and efficiency of monitoring systems as an aid to cost effectiveness (e.g., easier implementation).

This SAE Aerospace Recommended Practice (ARP) provides guidance to develop and assure validation and verification of IVHM systems used in autonomous aircraft, vehicles and driver assistance functions. IVHM covers a vehicle, monitoring and data processing functions inherent within its sub-systems, and the tools and processes used to manage and restore the vehicle’s health. The scope of this document is to address challenges and identify recommendations for the application of integrated vehicle health management (IVHM) specifically to intelligent systems performing tasks autonomously within the mobility sector. This document will focus on the core aspects of IVHM for autonomous vehicles that are common to both aerospace and automotive applications. It is anticipated that additional documents will be developed separately to cover aspects of this functionality that are unique to each application domain.

This document collates the ways and means that existing sensors can identify the platform’s exposure to volcanic ash. The capabilities include real-time detection and estimation, and post flight determinations of exposure and intensity. The document includes results of initiatives with the Federal Aviation Administration (FAA), the European Aviation Safety Agency (EASA), the International Civil Aviation Organization (ICAO), Transport Canada, various research organizations, Industry and other subject matter experts. The document illustrates the ways that an aircraft can use existing sensors to act as health monitoring tools so as to assess the operational and maintenance effects related to volcanic ash incidents and possibly help determine what remedial action to take after encountering a volcanic ash (VA) event.