Search Results

The investigation and development of a chemiluminescence based ethanol detection concept into a biosensor system is described. The biosensor uses alcohol oxidase to catalyze the reaction of short chain primary alcohols with elemental oxygen to produce hydrogen peroxide and the corresponding aldehyde. The reaction of hydrogen peroxide with an organic luminophore in the presence of a sufficient electric field results in emission of blue light with peak intensity at 425nm. The chemiluminescent light intensity is directly proportional to the alcohol concentration of the sample. The aqueous phase chemistry required for sensor operation is implemented using solid phase modules which adjust the pH of the influent stream, catalyze the oxidation of alcohol, provide the controlled addition of the luminophore to the flowing aqueous stream, and minimize the requirement for expendables. Precise control of the pH has proven essential for the long-term sustained release of the luminophore.

A breadboard Electrochemical Water Recovery System (EWRS) that is designed to produce potable water from a composite waste stream without the use of expendables is described in this paper. Umpqua Research Company working together with NASA/JSC developed a sequential three-step process to accomplish this task. Electrolysis removes approximately 60% of the organic contaminants from ersatz composite waste water containing a total organic carbon (TOC) concentration of 707 mg/L. The contaminants in this solution consist of organic and inorganic impurities common to laundry, shower, handwash, and urine waste water. Useful gases and organic acids are the chief by-products of the first step. The partially oxidized electrolysis solution is then transferred to the electrodialysis process where ionized organic and inorganic species are concentrated into a brine. The deionized solution of recovered water contains ∼6% of the original organic contaminants and >90% of the original water.

Dielectric heating via microwave irradiation of contaminant laden sorbents offers distinct advantages in comparison to conventional thermal regeneration techniques. High temperatures may be achieved very rapidly because electromagnetic energy is absorbed directly by the sorbent material. A Technology Demonstrator, incorporating efficient rectangular waveguide based sorbent cartridge designs and effective microwave transmission systems was designed, fabricated and tested. Importantly, the performance of the Molecular Sieve 13X Waveguide Cartridge for the removal of water vapor, the Molecular Sieve 5A Waveguide Cartridge for the removal of CO2, and the Activated Carbon Waveguide Cartridge for removal of volatile organics from air, were each validated by successive sorption/ microwave desorption cycles.

A Microwave Powered Solid Waste Stabilization and Water Recovery Prototype system has been developed for the treatment of solid waste materials generated during extended manned space missions. The system recovers water initially contained within wastes and stabilizes the residue with respect to microbial growth. Dry waste may then be safely stored or passed on to the next waste treatment process. Using microwave power, water present in the solid waste is selectively and rapidly heated. Liquid phase water flashes to steam and superheats. Hot water and steam formed in the interior of waste particles create an environment that is lethal to bacteria, yeasts, molds, and viruses. Steam contacts exposed surfaces and provides an effective thermal kill of microbes, in a manner similar to that of an autoclave. Volatilized water vapor is recovered by condensation.

The initial development effort is described for an electrochemical hydrogen peroxide generator and pervaporation module capable of producing and delivering hydrogen peroxide to a contaminated waste water stream as an oxidant or to a pure water stream for use as a disinfectant. A three chambered cell is used to generate hydrogen peroxide by a combined electrodialysis and electrochemical process. Each chamber is separated from its neighbor by a membrane allowing selective production of peroxide anions and hydrogen ions under controlled pH conditions followed by migration to form hydrogen peroxide. Concentrations greater than 6,500mg/L have been produced in this manner. The effects of voltage, pH, membranes, electrode materials, and method of oxygen introduction are delineated. Hydrogen peroxide is then transferred to the end-use stream by pervaporation. The impact of pH, relative flow rates, and ionic strength of sink and source solutions on pervaporation rates is detailed.

Gradient magnetically assisted fluidized bed (G-MAFB) methods are under development for the decomposition of solid waste materials in microgravity and hypogravity environments. The G-MAFB has been demonstrated in both laboratory and microgravity flight experiments. In this paper we summarize the results of gasification reactions conducted under a variety of conditions, including: combustion, pyrolysis (thermal decomposition), and steam reforming with and without oxygen addition. Wheat straw, representing a typical inedible plant biomass fraction, was chosen for this study because it is significantly more difficult to gasify than many other typical forms of solid waste such as food scraps, feces, and paper. In these experiments, major gasification products were quantified, including: ash, char, tar, carbon monoxide, carbon dioxide, methane, oxygen, and hydrogen.

A Microwave Enhanced Solid Waste Freeze Drying Prototype system has been developed for the treatment of solid waste materials generated during extended manned space missions. The system recovers water initially contained within wastes and stabilizes the residue with respect to microbial growth. Dry waste may then be safely stored or passed on to the next waste treatment process. Operating under vacuum, microwave power provides the energy necessary for sublimation of ice contained within the waste. This water vapor is subsequently collected as relatively pure ice on a Peltier thermoelectric condenser as it travels en route to the vacuum pump. In addition to stabilization via dehydration, microwave enhanced Freeze Drying reduces the microbial population (∼90%) in the waste.

The on-demand production of Medical Grade Water (MGW) is a critical biomedical requirement for future long-duration exploration missions. Potentially, large volumes of MGW may be needed to treat burn victims, with lesser amounts required to reconstitute pharmacological agents for medical preparations and biological experiments, and to formulate parenteral fluids during medical treatment. Storage of MGW is an untenable means to meet this requirement, as are nominal MGW production methods, which use a complex set of processes to remove chemical contaminants, inactivate all microorganisms, and eliminate endotoxins, a toxin originating from gram-negative bacteria cell walls. An innovative microgravity compatible alternative, using a microwave-based MGW generator, is described in this paper. The MGW generator efficiently couples microwaves to a single-phase flowing stream, resulting in super-autoclave temperatures.