Search Results

Active steering systems can help the driver to master critical driving situations. This paper presents a fuzzy logic control strategy on active steering vehicle based on a multi-body vehicle dynamic model. The multi-body vehicle dynamic model using ADAMS can accurately predict the dynamic performance of the vehicle. A new hybrid steering scheme including both active front steering (applying an additional front steering angle besides the driver input) and rear steering is presented to control both yaw velocity and sideslip angle. A set of fuzzy logic rules is designed for the active steering controller, and the fuzzy controller can adjust both sideslip angle and yaw velocity through the co-simulation between ADAMS and the Matlab fuzzy control unit with the optimized membership function. To ensure the design of high-quality fuzzy control rules, a rule optimization strategy is introduced.

A method to simulate digital human running using an optimization-based approach is presented. The digital human is considered as a mechanical system that includes link lengths, mass moments of inertia, joint torques, and external forces. The problem is formulated as an optimization problem to determine the joint angle profiles. The kinematics analysis of the model is carried out using the Denavit-Hartenberg method. The B-spline approximation is used for discretization of the joint angle profiles, and the recursive formulation is used for the dynamic equilibrium analysis. The equations of motion thus obtained are treated as equality constraints in the optimization process. With this formulation, a method for the integration of constrained equations of motion is not required. This is a unique feature of the present formulation and has advantages for the numerical solution process.

A combustion products analyzer (CPA) was built for use on the Shuttle in response to several thermodegradation incidents during early flights. When the Toxicology Laboratory at Johnson Space Center (JSC) began to assess the air quality monitoring needs for the International Space Station (ISS), the CPA was the starting point for the design of a thermodegradation event monitor. The final product was significantly different from the CPA and was named the “compound specific analyzer-combustion products” (CSA-CP). One major change from the CPA was the replacement of the hydrogen fluoride sensor with an oxygen sensor. The focus of this paper will be the CSA-CP oxygen sensor’s ground testing, performance on ISS, and reduced pressure testing in response to a need on ISS.

Over the past several years, significant advances have been made in the area of posture prediction. However, to make simulations more useful for vehicle design, additional unique tools are needed. This research focuses on the development of one such tool, called zone differentiation. This new tool allows user to visualize not only the complete reach envelope but also the interior comfort levels of the envelope. It uses a color map to display the relative values of various performance measures (i.e. comfort) at points surrounding an avatar. This is done by leveraging an optimization-based approach to posture prediction. Using this tool, a vehicle designer can visually display the impact that the placement of a control (switch, button, etc.) has on a driver's postural comfort. The comfort values are displayed in a manner similar to how a finite element analysis (FEA) programs display stress and strain results. The development of this tool requires two main components.

Our previous formulation for optimization-based dynamic motion simulation of a serial-link human upper body (from waist to right hand) is extended to predict the motion of a tree-structured human model that includes the torso, right arm, and left arm, with various applied external loads. The dynamics of tree-structured systems is formulated and implemented. The equations of motion for the tree structures must be derived carefully when dealing with the connection link. The optimum solution results show realistic dual-arm human motions and the required joint actuator torques. In the second part of this paper, a new method is introduced in which the constraint forces and moments at the joints are calculated along with the motion and muscle-induced actuator torques. A set of fictitious joints are modeled in addition to the real joints.

The objective of this paper is to present our method of predicting and simulating visually realistic and dynamically consistent human stair-climbing motion. The digital human is modeled as a 55-degrees of freedom branched mechanical system with associated human anthropometry-based link lengths, mass moments of inertia, and centers of gravity. The joint angle profiles are determined using a B-spline-based parametric optimization technique subject to different physics-based, task-based, and environment-based constraints. The formulation offers the ability to study effects of the magnitude and location of external forces on the resulting joint angle profiles and joint torque profiles. Several virtual experiments are conducted using this optimization-based approach and results are presented.

Due to the influence of non-linear dynamic characteristic of clutch, time-delays, external disturbance and parameter uncertainty, it is difficult to control the automated clutch precisely during the engaging process of the automated clutch for automatic mechanical transmission (AMT) vehicles. Here, an enhanced fuzzy sliding mode controller (EFSMC) has been proposed to control the automated clutch. To meet the real-time requirement of the automated clutch, the region-wise linear technology is adapted to reduce the fuzzy rules of the EFSMC. The simulation results have shown that the proposed controller can achieve a higher performance with minimum reaching time and smooth control actions. In addition, it shows that the controller is effective and robust to the parametric variation and external disturbance.

We propose an algorithm of predicting dynamic biped motions of Santos™ human model. An alternative and efficient formulation of the Zero-Moment Point (ZMP) for dynamic balance and the approximated ground reaction forces/moments are derived from the resultant reaction loads, which includes the gravity, the externally applied loads, and the inertia. The optimization problem is formulated to address the redundancy of the human task, where the general biped and the task-specific constraints are imposed depending on the task requirements. The proposed method is fully predictive and generates physically feasible human-like motions from scratch without any input reference from motion capture or animation. The resulting generated motions demonstrate how a human reacts effectively to different external load conditions in performing a given task by showing realistic features of cause and effect.

Santos™, a digital human avatar developed at The University of Iowa, exhibits extensive modeling and simulation capabilities. Santos™ is a part of a virtual environment for conducting human factors analysis consisting of posture prediction, motion prediction, and ergonomics studies. This paper presents part of the functionality in the Santos™ virtual environment, which is an optimization-based algorithm for simulating dynamic motion of Santos™. The joint torque and muscle power during the motion are also calculated within the algorithm. Mathematical cost functions that evaluate human performance are essential to any effort that would evaluate and compare various ergonomic designs. It is widely accepted that the ergonomic design process is actually an optimization problem with many design variables. This effort is basically a task-based approach that believes humans assume different postures and exert different forces to accomplish different tasks.

This paper presents newly developed capabilities for the virtual human Santos™. Santos is an avatar that has extensive modeling and simulation features. It is a digital human with 109 degrees of freedom (DOF), an optimization-based method, predictive dynamics, and realistic human appearance. The new capabilities include (1) significant progress in predictive dynamics (walking and running), (2) advanced clothing modeling and simulation, (3) muscle wrapping and sliding, and (4) hand biomechanics. With these newly developed functionalities, Santos can simulate various dynamic tasks such as walking and running, investigate clothing restrictions to motion such as joint limits and torques, simulate the musculoskeletal system in real time, predict hand injury by monitoring the joint torques, and facilitate vehicle interior design. Finally, additional on-going projects are summarized.

This paper presents a novel approach to determining the joint motion coupling relationship for the human shoulder complex. The human shoulder complex is the most sophisticated part in terms of degrees of freedom and motion. In the literature, different human shoulder biomechanical models have been developed for various purposes. Also, researchers have realized that there are constant movement relationships among the shoulder bones: the clavicle, scapula, and humerus. This is due to muscles and tendons that are involved in skeletal motions. These relationships, which are also called shoulder rhythm, entail joint motion coupling and joint limit coupling. However, the scope of this work is to determine the joint motion coupling relationship. This relationship is available in the literature, but it is an Euler-angle-based relationship. In the virtual human modeling environment, we cannot directly use this Euler-angle-based relationship.

This paper presents an optimization-based algorithm for simulating the dynamic motion of a digital human. We also formulate the metabolic energy expenditure during the motion, which is calculated within our algorithm. This algorithm is implemented and applied to Santos™, an avatar developed at The University of Iowa. Santos™ is a part of a virtual environment for conducting digital human analysis consisting of posture prediction, motion prediction, and physiology studies. This paper demonstrates our dynamic motion algorithm within the Santos™ virtual environment. Mathematical evaluations of human performance are essential to any effort to compare various ergonomic designs. In fact, the human factors design process can be formulated as an optimization problem that maximizes human performance. In particular, an optimal design must be found while taking into consideration the effects of different motions and hand loads corresponding to a number of tasks.

Human performance measures such as discomfort and joint displacement play an important role in product design. The virtual human Santos™, a new generation of virtual humans developed at the University of Iowa, goes directly to the CAD model to evaluate a design, saving time and money. This paper presents an optimization-based workspace zone differentiation and visualization. Around the workspace of virtual humans, a volume is discretized to small zones and the posture prediction on each central point of the zone will determine whether the points are outside the workspace as well as the values of different objective functions. Visualization of zone differentiation is accomplished by showing different colors based on values of human performance measures on points that are located inside the workspace. The proposed method can subsequently help ergonomic design.

In this study, an optimization-based approach for simulating the lifting motion of a three dimensional digital human model is presented. Lifting motion is generated by minimizing a performance measure subjected to basic physical and kinematical constraints. Two performance measures are investigated: one is the dynamic effort; the other is the compression and shear forces on the lumbar joint. The lifting strategies are predicted with different performance measures. The joint strength (torque limit) and the compression and shear force on lumbar joint are also addressed in this study to avoid injury during lifting motion.

Human hands are the bridge between humans and the objects to be manipulated or grasped both in the real and virtual world. Hands are used to grasp or manipulate objects and one of the most important functionalities is to position the fingers, i.e., given the position of the fingertip and to determine the joint angles. Last year we presented a 25-degree of freedom (DOF) hand model that has palm arch functionality. In this paper we preset an optimization-based inverse kinematics approach to position this 25 DOF hand locally with respect to the wrist instead of the traditional Moore-Penrose pseudo-inverse and experiment methods. The hypothesis is that human performance measures govern the configuration and motion of the hand. We also propose contact force and joint torque prediction.

Design and packaging of automotive interiors and airplane cockpits has become a science in itself, particularly in recent years where safety is paramount. There are various methods for restraining operators in their seats, including fitting an operator, such as a race car driver or pilot, with two seat belts, one for each side of the body, a three point restraining system as in commercial vehicles, and a lap belt as in some trucks and other types of vehicles. Moreover, significant experimental efforts have been made to study driver reach and barriers since they directly affect performance and safety. This paper presents a rigorous formulation for addressing the reach envelope and barriers therein of a 3-point restrained driver compared with a lap-belt-restrained driver. The formulation is based on a kinematic model of the driver, which characterizes the upper body and arm as 7 degrees of freedom (DOF) for an unrestrained and 4DOF for a 3-point restrained driver.

A robust design procedure is applied to achieve improved vehicle handling performance as an integral part of simulation-based vehicle design. This paper presents a hybrid robust design method, the robust design process strategy (RDPS), which makes full use of the intense complementary action of characteristics between the Response Surface Methodology (RSM) and the Taguchi method, to get the robust design of the vehicle handling performance. The vehicle multi-body dynamic model is built in the platform that is constructed by the software of iSIGHT, ADAMS/CAR, and MATLAB. The design-of-experiment method of the Latin Hypercube (LHC) is used to obtain the approximate area values, and then the RDPS is utilized to achieve improved vehicle handling performance results. The validation is made by the Monte Carlo Simulation Technique (MCST) in terms of the effectiveness of the RDPS in solving robust design problems.

This paper presents a SANTOS™ 25 degree-of-freedom (DOF) hand model and the forward and inverse kinematic analysis. The Denavit-Hartenberg (D-H) method is used to define the position of the end- effector (fingertip). In the SANTOS™ hand model each finger has different constraints and movements (e.g., the middle finger in distal Interphalangeal (DIP) joint can move in Flexion/Extension (F/E) with a range 0–100 degrees, and the thumb in interphalangeal (IP) joint can rotate in F/E with arrange of 15H/80). Including hand model SANTOS™ has over 100 DOFs and the forward and inverse kinematics have been studied. Optimization-based dynamic motion prediction will be used to consider different gestures for hand grasping.

Presented in this paper is an on-going project to develop a new generation of virtual human models that are highly realistic in terms of appearance, movement, and feedback (evaluation of the human body during task execution). Santos™ is an avatar that exhibits extensive modeling and simulation capabilities. It is an anatomically correct human model with more than 100 degrees of freedom. Santos™ resides in a virtual environment and can conduct human-factors analysis. This analysis entails, among other things, posture prediction, motion prediction, gait analysis, reach envelope analysis, and ergonomics studies. There are essentially three stages to developing virtual humans: (1) basic human modeling (representing how a human functions independently), (2) input functionality (awareness and analysis of the human’s environment), and (3) intelligent reaction to input (memory, reasoning, etc.). This paper addresses the first stage.

The human shoulder plays an important role in human posture and motion, especially in scenarios in which humans need achieve tasks with external loads. The shoulder complex model is critical in digital human modeling and simulation because a fidelity model is the basis for realistic posture and motion predictions for digital humans. The complexity of the shoulder mechanism makes it difficult to model a shoulder complex realistically. Although many researchers have attempted to model the human shoulder complex, there has not been a survey of these models and their benefits and limitations. This paper attempts to review various biomechanical models proposed and summarize the pros and cons. It focuses mainly on the human modeling domain, although some of these models were originally from the robotics field. The models are divided into two major categories: open-loop chain models and closed-loop chain models.