Refine Your Search

Topic

Search Results

Standard

Component Nomenclature Graders

1984-07-01
HISTORICAL
J870_198407
This SAE Standard provides names of major components peculiar to graders as defined in SAE J1057 (See Figure 1). Illustrations are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Construction Two- and Four-Wheel Tractors

1984-07-01
HISTORICAL
J869_198407
This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Construction Two- and Four-Wheel Tractors

1975-08-01
HISTORICAL
J869A_197508
This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Dumper Trailer

1974-12-01
HISTORICAL
J734C_197412
This SAE Standard provides names of major components peculiar to the trailer portion of certain configurations of dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Dumper Trailer

1990-07-01
HISTORICAL
J734_199007
This SAE Standard provides names of major components peculiar to the trailer portion of certain configurations of dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Dumpers

1984-12-01
HISTORICAL
J1016_198412
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.
Standard

Component Nomenclature--Loader

1975-06-01
HISTORICAL
J731D_197506
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type.
Standard

Component Nomenclature--Loader

1977-10-01
HISTORICAL
J731D_197710
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type.
Standard

Component Nomenclature--Loader

1985-02-01
HISTORICAL
J731_198502
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type.
Standard

Component Nomenclature--Scrapers

1984-07-01
HISTORICAL
J728_198407
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Scrapers

2000-06-28
CURRENT
J728_200006
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature-Graders

1990-07-30
HISTORICAL
J870_199007
This SAE Standard provides names of major components peculiar to graders as defined in SAE J1057 (See Figure 1). Illustrations are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature-Scrapers

1990-07-01
HISTORICAL
J728_199007
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Countersunk Square Holes for Cutting Edges and End Bits

2011-10-25
CURRENT
J740_201110
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
Standard

Cutting Edge - Cross Sections Loader Straight

2011-10-25
CURRENT
J1303_201110
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85. NOTE—For some heavy duty applications, cross sections with larger blunts and greater bevel angles may be required.
Standard

Cutting Edge - Cross Sections Loader Straight with Bolt Holes

2011-10-25
CURRENT
J1304_201110
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled and machined sections only. Cutting edge cross section thickness is limited to a maximum of 35 mm. Bolt-on tooth adapters are rarely used on loader buckets with cutting edge thicknesses in excess of 35 mm. This recommended practice applies only to straight cutting edges defined as those whose leading edge and rear edge are parallel and thus are of constant cross section. Overall cross sections to which bolt holes were added as indicated by this recommended practice were selected from those indicated per "Cutting Edge—Cross Sections Loader Straight," SAE J1303 FEB85. Selection was based on minimum section width requirements to accommodate bolt-on tooth adapters. NOTE—For some heavy-duty applications, cross sections with larger blunts, greater bevel angles, and larger bolt holes may be required.
Standard

Cutting Edge - Double Bevel Cross Sections

2014-01-08
CURRENT
J738_201401
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
Standard

Cutting Edge - Double Bevel Cross Sections

2019-04-22
WIP
J738
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a. Scrapers as defined in ISO 7133. b. Dozers as described in ISO 6747. c. Loaders as described in ISO 7131. d. Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
X