Refine Your Search

Topic

Search Results

Standard

Capacity Rating--Dozer Blades

1986-05-01
HISTORICAL
J1265_198605
This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position. This standard does not apply to angled blades or other tools used to side cast materials, nor does it apply to any blade with design features such as end plates extended beyond the blade face. This standard assumes the blade face to be flat and vertical, and does not consider the blade included volume (Figure 1). Although provisions are presented for some deviations, this standard is intended for rectangular blades whose width/height ratios are at least 1.0. Purpose The purpose of this standard is to provide a uniform method for calculating the capacities of dozer blades. It is intended for relative comparisons of dozer blade capacity, and not for predicting capacities or productivities in actual field conditions.
Standard

Capacity Rating--Dozer Blades

1980-02-01
HISTORICAL
J1265_198002
This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position. This standard does not apply to angled blades or other tools used to side cast materials, nor does it apply to any blade with design features such as end plates extended beyond the blade face. This standard assumes the blade face to be flat and vertical, and does not consider the blade included volume (Figure 1). Although provisions are presented for some deviations, this standard is intended for rectangular blades whose width/height ratios are at least 1.0. Purpose The purpose of this standard is to provide a uniform method for calculating the capacities of dozer blades. It is intended for relative comparisons of dozer blade capacity, and not for predicting capacities or productivities in actual field conditions.
Standard

Capacity Rating--Elevating Scrapers

1975-06-01
HISTORICAL
J957_197506
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

Capacity Rating--Elevating Scrapers

1985-01-01
HISTORICAL
J957_198501
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

Capacity Rating--Loader Bucket

1975-06-01
HISTORICAL
J742B_197506
This standard applies to buckets of loaders (as defined by SAE J1057a, Identification Terminology of Earthmoving Machines). This method applies primarily to buckets having parallel sides and a cutting edge parallel to the top edge of the top edge of the back sheet. Moderately clipped back sheet corners will introduce no appreciable errors. Bucket teeth, tooth adapters, as well as other similar local discontinuities are ignored. a. Interpretation of irregular shaped cutting edges is identified in 4.4. b. Interpretation of irregular shaped side sheets is identified in 4.5.
Standard

Capacity Rating--Scraper, Open Bowl

1975-06-01
HISTORICAL
J741B_197506
This SAE Standard specifies a procedure for approximating the volume of typical materials contained in the bowl of Open Bowl scrapers as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and representative volumes on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

Capacity Rating--Scraper, Open Bowl

1985-01-01
HISTORICAL
J741_198501
This SAE Standard specifies a procedure for approximating the volume of typical materials contained in the bowl of Open Bowl scrapers as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and representative volumes on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

Component Nomenclature Graders

1984-07-01
HISTORICAL
J870_198407
This SAE Standard provides names of major components peculiar to graders as defined in SAE J1057 (See Figure 1). Illustrations are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Construction Two- and Four-Wheel Tractors

1975-08-01
HISTORICAL
J869A_197508
This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Dumper Trailer

1990-07-01
HISTORICAL
J734_199007
This SAE Standard provides names of major components peculiar to the trailer portion of certain configurations of dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Dumpers

1984-12-01
HISTORICAL
J1016_198412
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.
Standard

Component Nomenclature--Scrapers

1984-07-01
HISTORICAL
J728_198407
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Scrapers

2000-06-28
CURRENT
J728_200006
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature-Graders

1990-07-30
HISTORICAL
J870_199007
This SAE Standard provides names of major components peculiar to graders as defined in SAE J1057 (See Figure 1). Illustrations are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature-Scrapers

1990-07-01
HISTORICAL
J728_199007
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Countersunk Square Holes for Cutting Edges and End Bits

2011-10-25
CURRENT
J740_201110
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
X