Refine Your Search

Search Results

Viewing 1 to 17 of 17
Standard

Auxiliary Power Take-off Drives for Agricultural Tractors

2019-12-04
CURRENT
J717_201912
This SAE Standard establishes specifications for mid- and side-power take-off drives that will be helpful in designing implements. Design of the implement attaching means must be tailored to each tractor, depending on attaching points available and the exact location of the auxiliary shaft.
Standard

Axle Application Load Rating for Industrial Wheel Loaders and Backhoe Loaders

1988-02-01
HISTORICAL
J43_198802
The intent of this recommended practice is to limit declared axle load ratings. These latest editorial revisions bring this recommended practice closer to its original concept. It is intended to make this an interim document until a performance criteria document can be written. the purpose of this SAE Recommended Practice is to establish a standardized method for determining maximum front and rear axle load ratings for industrial wheel loaders and backhoe loaders.
Standard

FAST FILL FUELING INSTALLATION FOR OFF-ROAD SELF-PROPELLED WORK MACHINES

2014-09-09
CURRENT
J176_201409
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L, although fast fill fueling can be used on machines with smaller fuel capacity.
Standard

Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines

1977-08-01
HISTORICAL
J176A_197708
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
Standard

Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines

1977-08-01
HISTORICAL
J176_197708
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
Standard

Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines

1989-12-01
HISTORICAL
J176_198912
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
Standard

Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines

2006-08-21
HISTORICAL
J176_200608
This SAE Standard applies to off-road self-propelled work machines as categorized in SAE J1116. A fast fueling system incorporates a fueling receiver through which fuel is conveyed to the fuel tank and an automatic shut-off vent to provide automatic fill level control, normal and emergency venting. The purpose of this document is to define the proper installation, position, protection, and size of a fueling receiver and automatic shut-off vent connections. Fast fill fueling typically applies to self-propelled machines with a fuel capacity over 380 L or as applicable on machines with less capacity.
Standard

Guidelines for Liquid Level Indicators

2007-04-30
HISTORICAL
J48_200704
This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.
Standard

Guidelines for Liquid Level Indicators

2017-02-08
CURRENT
J48_201702
This SAE Recommended Practice pertains to liquid level determination for any fluid compartment of off-road work machines as defined in SAE J1116 and ISO 6165.
Standard

Maintenance Interval Chart

2018-09-25
WIP
J753
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
Standard

Maintenance Interval Chart

2011-10-27
CURRENT
J753_201110
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

2012-05-02
CURRENT
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
X