Search Results

With the growing complexity and integration of systems as satellites, automobiles, aircrafts, turbines, power controls and traffic controls, as prescribed by SAE-ARP-4754A Standard, the time de-synchronization can cause serious or even catastrophic failures. Time synchronization is a very important aspect to achieve high performance, reliability and determinism in networked control systems. Such systems operate in a real time distributed environment which frequently requires a consistent time view among different devices, levels and granularities. So, to guarantee high performance, reliability and determinism it is required a performance evaluation of time synchronization of the overall system. This time synchronization performance evaluation can be done in different ways, as experiments and/or model and simulation.

In this work, the problem of fault detection, isolation, and reconfiguration (FDIR) for Networked-Control Systems (NCS) of aerospace vehicles is discussed. The concept of fault-tolerance is introduced from a generic structure, and a review on quantitative and qualitative methods (state estimation, parameter estimation, parity space, statistic testing, neural networks, etc.) for FDIR is then performed. Afterwards, the use of networks as loop-closing elements is introduced, followed by a discussion on advantages (flexibility, energy demand, etc.) and challenges (networks effects on performance, closed-loop fault-effects on safety, etc.) represented thereby. Finally, examples of applications on aerospace vehicles illustrate the importance of the discussion herein exposed.

The architecture is a concept very broad and important that is directly connected to the realization of a system. It defines what the system is capable of doing, how it accomplishes its mission and how the system is. Currently, the development of system architectures is considered a domain of knowledge where science meets art. In some specific areas, the methods on the development of system architectures are already well formalized. However, when analyzing the evaluation of system architectures such as those for multi-domain control systems, it is clear that there is still much room for rationalization. In these cases, the search for new methods for the evaluation of system architectures is currently in the state of art. In this work we discuss methods used in the verification and validation of control systems architectures of cyber-physical systems based on models and systems metrics.

Cyber-physical systems are joint instances of growing complexity and high integration of elements in the information and physical domains reaching high levels of difficulty to engineer an operate them. This happens with satellites, aircraft, automobiles, smart grids and others. Current technologies as computation, communication and control integrate those domains to communicate, synchronize and operate together. However, the integration of different domains brings new challenges and adds new issues, mainly in real time distributed control systems, beginning with time synchronization. In this paper, we present a discussion on time synchronization and their effects in distributed cyber-physical control systems. To do that, we review the literature, discuss some time synchronization techniques used in cyber-physical systems, and illustrate them via model and simulation of a system representative of the aerospace area.

Switching controls are those that can switch between control or plant modes to perform their functions. They have the advantage of being simpler to design than an equivalent control system with a single mode. However, the transients between those modes can introduce steps or overshootings in the state variables, and this can degrade the performance or even damage the control or the plant. So, the smoothing of such transients is vital for their reliability and mantainability. This is can be of extreme importance in the aerospace and automotive fields, plenty of switchings between manual and autopilot modes via relays, or among gears via clutches, for example. In this work, we present a first strategy for smoothing transients in switching controls of aerospace and automotive systems.

Control systems that can switch between control modes have the advantage of being simpler to design than an equivalent system with a single mode. However, the transition between control modes can introduce steps or overshootings in the state variables, and this can degrade the performance or even damage the system. In this work, we will use integral criteria in an original way, to determine a coefficient on the system which should optimize the trajectory of the control signal, during the switching between two modes. Effectively, each transition will be done by a subsystem specific for it, according to the selected criterion. The simulations will be made in MATRIXx, using as models the system of control of attitude of the Multimission Platform, and a system which keeps the synchrony between two induction motors.

In this work we present a new procedure for customizing, in the desired format, requirements reports generated by a Requirements Engineering Environment. This environment includes tools for: 1- capturing textual and pictoric requirements; 2- templating requirements documents that can be adjustable to the formats required by the certification authorities or system engineering groups; 3- translating features from/to the main word processors used in the industry (Word, Excel, etc. formats); 4- managing requirements configuration. It provides gains of productivity, correctness, reusability, traceability, coverage, etc, improving the efficiency of the projects. The procedure emphasizes items 2 and 3, and is illustrated with some examples driven from the aerospace industry.

Nowadays, given the shrinking budgets and deadlines of the aerospace and automotive industries, the importance and need of the requirements engineering is becoming more and more evident. This means that progressively more users face a difficult task on the different environments of project development: 1) to write better requirements; and 2) to do it faster than ever. It would be nice if they had some tools to help them and abbreviate such a difficult task. This work summarizes the development of a new tool that does exactly that. Its wizard guides the user through the steps necessary to create good requirements when writting a requirements document, depending on the kind of requirements document desired. For example: there are significant differences between user requirements and system requirements documents. The wizard script is composed by a serie of questions related to the parts of the scheme to build a complete and effective requirement.

In critical real-time computer systems, whether aircraft, automotive and industrial products it is very common the use of a fixed priority scheduler. The fixed priority scheduler has shown a good performance in control applications even in different applications where it was adopted. But nowadays, to go forward with the technology, be it in hardware and software, schedulers with dynamic priority can be a better alternative in certain situations. The present work aims to show that a variable priority scheduler can improve the performance of a control system obtained with a fixed priority scheduler, even when it was bad conditioned. This study is based on a four motor position control system. For this, the study will make use of a specialized simulation tool. In the future, we intend to extend this study to schedulers that use random and sporadic tasks.

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well-fitted architecture adopted by this trend is the common bus network architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics that must be considered at the design time of a control system. This work, still in development, focuses on a worst case formula for a communication (TDMA) plus computation (RMS) on a NCS. This formula, in a first instance, agrees with the simulated cases under the hypotheses and conditions when the NCS is composed by 1 actuator - 1 sensor and when is composed by 2 actuators - 2 sensors. In the future, we intend to generalize this formula and extend this study to NCS that uses other communication protocols or others computer schedulers.

Companies are gradually developing: 1) complex and/or highly integrated systems including vehicles (as satellites, airplanes, cars, etc.) or equipment (as computers, cell phones, no breaks, etc.) to use under 2) increasingly varied or inhospitable environments, and to survive under 3) increasingly long life cycles and unavoidable changes in staff & facilities & technologies. The overall decision to use (by time, cost, quality, of functions, services, etc.) such end systems under 2 require 4) high Dependability (Reliability, Maintainability, Availability, Correction, Safety, Security, etc.) of them. The overall survival in use (by health monitoring, housekeeping, retrofit, upgrade, etc.) of such end systems under 3 require 5) high Suportability (Maintainability, Adaptability, Availability, Robustness, etc.) of them coupled with the support systems.

Currently, aerospace and automotive industries are developing complexand/or highly integrated systems, whose services require greater confidence to meet a set of specifications that are increasingly demanding, such as successfully operating a communications satellite, a commercial airplane, an automatic automobile, and so on. To meet these requirements and expectations, there is a growing need for fault treatment, up to predict faults and monitor the health of the components, equipment, subsystems or systems used. In the last decades, the approaches of 1) Fault Prevention, 2) Fault Detection/Tolerance and 3) Fault Detection/Correction have been widely studied and explored.

Current systems such as: satellites, aircrafts, automobiles, turbines, power controls and traffic controls are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754 Standard. Such systems and their control systems use many modes of operation and many forms of redundancy to achieve high levels of performance and high levels of reliability under changing environments and phases of their lifecycle. The environment disturbances, environment variability, plant non-linear dynamics, plant wear, plant faults, or the non-symmetric plant operation may cause de-synchronization in phase or time among: 1) simultaneous units in the same normal mode of operation; 2) successive units in successive normal modes of operation; 3) main and spare units from normal to faulty modes of operation. So, techniques to reduce those causes or their effects are becoming important aspects to consider in the design of such systems.

Real-time critical systems are those whose failures may cause loss of transactions/data, missions/batches, vehicles/properties, or even people/human life. Accordingly, some regulations prescribe their maximum acceptable probability of failures to range from about 10−4 to 10−10 failures per hour. Examples of such systems are the ones involving nuclear plants, aircrafts, satellites, automobiles, or traffic controls. They are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754A Standard. Those systems include, most of the time, real time critical software that must be specified, designed, implemented, validated, verified and accredited (VVA). To do that, models, specially the V-Model, are frequently adopted, together with methods and tools which perform software VVA to ensure compliance (of correctness, reliability, robustness, etc.) of software to several specific standards such as DO178-B/DO-178C (aviation) or IEC 26262 (automotive) among others.

This work presents the analysis, design and simulation of the reconfigurable control architecture for the contingency mode of the MultiMission Platform (MMP). The MMP is a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other Sub-Modes, according to ground command or information coming from the control system, mainly alarms. The implementation followed the specifications when they were found, otherwise it was designed. They cover operations from detumbling after launcher separation and solar acquisition, to achieving payload nominal attitude and orbital corrections maneuvers. The manager block of the control system was implemented as a finite state machine. The tests are based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission, be it during modes or transitions between modes and submodes.

This work presents the first part of the analysis, design and simulation of the reconfigurable control architecture for the Multi-Mission Platform (MMP), a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation. The implementation followed the specifications when they were found, otherwise it was designed. The manager block of the control system was implemented as a finite state machine. The tests were based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission.

The Multimission Platform (MMP) is a generic service module currently in Project at INPE. In the 2001 version, its control system can be switched between nine main Operation Modes and other submodes, according to information from satellite sensors and ground commands. The Nominal Mode stabilizes the MMP in three axes and takes it to a nominal attitude, using three reaction wheels. Each wheel has coarse and fine acquisition submodes. The use of multiple modes of control for specific situations frequently is simpler than projecting a single controller for all cases. However, besides being harder to warrant its general stability, the mere switching between these submodes generates bumps, which can reduce the performance and even damage the actuator or plant. In this work, we present an application of diverse methods to smooth the transition between control submodes of the Nominal Mode of the MMP.

This paper presents the automatic code generation process of the academic design of an Attitude Control System (ACS) for the Multi-Mission Platform (MMP). The MMP is a three axis stabilized artificial satellite now under development at the National Institute for Space Research (INPE). Such design applied some software engineering concepts as: 1)visual modeling; 2)automatic code generation; 3)automatic code migration; 4)soft real time simulation; and 5)hard real time simulation. A block diagram based modeling and a virtual time simulation of the MMP ACS in its nominal operational mode were built in the MatrixX 7.1 environment satisfying the three axis pointing and stabilization requirements. After that, its AutoCode module was used to generate C ANSI code representing the block diagram model. Four operating systems were used for code migration: 1)Windows 2000; 2)Mandrake Linux 10.1; 3)RedHawk Linux 2.1; and 4)RTEMS 4.6.2.

A constant challenge for the mobility engineering is to build correctly, the right product at the right time, cost and quality. This challenge gives opportunities to adopt new paradigms in system development, especially in generation, migration and tests of controller codes. This work presents the automatic generation, migration, and tests of real time code to an embedded controller. This is part of the Attitude and Orbit Control System (AOCS) for the Multi-Mission Platform (MMP) of the National Institute for Space Research (INPE). The modeling and simulation paradigm associated with automatic code generation makes possible the migration of a real time embedded controller code to a wide variety of target processors and/or Real Time Operating Systems (RTOS) using the same controller model. The MATRIXx (XMath/SystemBuild/AutoCode/DocumentIt) modeling and simulation environment was used to analyze and design the controller and generate its real time code.

Many control systems switch between control modes according to necessity. That is often simpler than designing a full control to all situations. However, this creates new problems, as determining the composed system stability and the transient during switching. The latter, while temporary, may introduce overshooting that degrade performance and damage the plant. This is particularly true for the MultiMission Platform (MMP), a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other submodes, according to ground command or information coming from the control system, mainly alarms. It can acquire one and three axis stabilization in generic attitudes, with actuators including magnetotorquers, thrusters and reaction wheels.