Search Results

Standard

ABRASION RESISTANCE TESTING—VEHICLE EXTERIOR GRAPHICS AND PIN STRIPING

1989-06-01

HISTORICAL

J1847_198906

This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.

Standard

ACCELERATED ENVIRONMENTAL TESTING FOR BONDED AUTOMOTIVE ASSEMBLIES

1992-08-01

HISTORICAL

J2100_199208

This SAE Recommended Practice defines conditions to which bonded assemblies can be exposed to simulate environmental aging. These recommendations are generally based on existing Original Equipment Manufacturer requirements at this time. (Environmental specifications used for this proposal were from General Motors, Ford, and Chrysler.) The substrate type, dimension, and number are described by the standard for materials being tested and should include control specimens which receive no environmental aging.

Standard

Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping

2021-01-07

CURRENT

J1847_202101

This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.

Standard

Accelerated Environmental Testing for Bonded Automotive Assemblies

2021-01-07

CURRENT

J2100_202101

This SAE Recommended Practice defines conditions to which bonded assemblies can be exposed to simulate environmental aging. These recommendations are generally based on existing Original Equipment Manufacturer requirements at this time. (Environmental specifications used for this proposal were from General Motors, Ford, and Chrysler.) The substrate type, dimension, and number are described by the standard for materials being tested and should include control specimens which receive no environmental aging.

Standard

CORROSION PREVENTIVE COMPOUND, TOPSIDE VEHICLE CORROSION PROTECTION

1989-06-01

HISTORICAL

J1804_198906

This specification covers corrosion preventive compounds for spray application to vehicle body cavities

Standard

Corrosion Preventive Compound, Topside Vehicle Corrosion Protection

2016-04-05

CURRENT

J1804_201604

This specification covers corrosion preventive compounds for spray application to vehicle body cavities

Standard

Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection

2003-09-25

HISTORICAL

J1959_200309

This specification covers underbody corrosion preventive compounds for application to vehicle underbodies.

Standard

Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection

2016-04-05

CURRENT

J1959_201604

This specification covers underbody corrosion preventive compounds for application to vehicle underbodies.

Standard

DECORATIVE ANODIZING SPECIFICATION FOR AUTOMOTIVE APPLICATIONS

1993-06-01

HISTORICAL

J1974_199306

Detailed in this SAE Recommended Practice are interior and exterior bright or electrolytically colored anodized aluminum automotive components in the form of seat trim, dashboard, window or side body mouldings, bumpers, wheels, rocker panel, etc.

Standard

Decorative Anodizing Specification for Automotive Applications

2013-03-28

CURRENT

J1974_201303

This SAE Recommended Practice is aimed at ensuring high-quality products of anodized aluminum automotive components in terms of durability and appearance. Decorative sulfuric acid anodizing has been well developed over the last several decades in the aluminum industry. Exterior and interior performance demonstrated that parts processed to this document meet long-term durability requirements. Since the treatment of processing variables is outside the scope of this document, it is important for applicators of this coating to develop an intimate knowledge of their process, and control all parameters that affect the quality of the end product. The use of techniques such as statistical process control (SPC), capability studies, design of experiments, process optimization, etc., are critical to produce material of consistently high quality.

Standard

ELASTOMERIC BUSHING "TRAC" APPLICATION CODE

1994-10-01

HISTORICAL

J1883_199410

The bushing "TRAC" code is intended to be a tool that will aid in the definition of the geometric environment for the test, or use, of an elastomeric bushing.

Standard

ELECTRIC HOURMETER SPECIFICATION

1983-03-01

HISTORICAL

J1378_198303

This SAE Recommended Practice establishes minimum requirements for electric hourmeters for general vehicular applications.

Standard

Elastomeric Bushing "TRAC" Application Code

2017-02-09

CURRENT

J1883_201702

The bushing "TRAC" code is intended to be a tool that will aid in the definition of the geometric environment for the test, or use, of an elastomeric bushing.

Standard

Electrocoat Compatibilities of Automotive Sealers

2021-01-07

CURRENT

J1969_202101

This SAE Recommended Practice sets forth a method for determining the compatibility of automotive sealers with cathodic electrocoat primer.

Standard

Florida Exposure of Automotive Finishes

2013-11-13

CURRENT

J951_201311

The purpose of this SAE Information Report is to compare the results of Florida exposure at 45 deg from the horizontal, facing south, with those at deg from the horizontal, facing south, using various types and colors of automotive finishes.

Standard

GUIDELINES FOR LABORATORY CYCLIC CORROSION TEST PROCEDURES FOR PAINTED AUTOMOTIVE PARTS

1993-10-13

HISTORICAL

J1563_199310

These guidelines are intended for those engineers and scientists who evaluate the corrosion performance of painted automotive parts in laboratory cyclic tests. The guidelines are intended to help ensure that the results of the tests can be used to reach conclusions concerning the variables under study without being confounded by the test procedure itself. The guidelines also serve as a means to assist users of this type of test in obtaining good inter-laboratory agreement of results.

Standard

Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts

2016-04-05

CURRENT

J1563_201604

These guidelines are intended for those engineers and scientists who evaluate the corrosion performance of painted automotive parts in laboratory cyclic tests. The guidelines are intended to help ensure that the results of the tests can be used to reach conclusions concerning the variables under study without being confounded by the test procedure itself. The guidelines also serve as a means to assist users of this type of test in obtaining good inter-laboratory agreement of results.

Standard

Helical Springs: Specification Check Lists

2004-10-11

HISTORICAL

J1122_200410

The following SAE Recommended Practice furnishes sample forms for helical compression, extension and torsion springs to provide a uniform method for specifying design information. It is not necessary to fill in all the data, but sufficient information must be supplied to fully describe the part and to satisfy the requirements of its application. For detailed information, see “Design and Application of Helical and Spiral Springs - SAE HS 795”, also “Helical Compression and Extension Spring Terminology - SAE J1121”. Both of these documents use SI (metric) Units in accordance with the provisions of SAE TSB 003, as does SAE J1122. Here, however, the U.S. Customary Units (in, lb, psi) have been added in parentheses after each SI Unit for the convenience of the user who must furnish specifications on a project where all requirements are listed in non-metric terms.

Standard

Helical Springs: Specification Check Lists

2016-08-02

CURRENT

J1122_201608

The following SAE Recommended Practice furnishes sample forms for helical compression, extension and torsion springs to provide a uniform method for specifying design information. It is not necessary to fill in all the data, but sufficient information must be supplied to fully describe the part and to satisfy the requirements of its application. For detailed information, see “Design and Application of Helical and Spiral Springs - SAE HS 795”, also “Helical Compression and Extension Spring Terminology - SAE J1121”. Both of these documents use SI (metric) Units in accordance with the provisions of SAE TSB 003, as does SAE J1122. Here, however, the U.S. Customary Units (in, lb, psi) have been added in parentheses after each SI Unit for the convenience of the user who must furnish specifications on a project where all requirements are listed in non-metric terms.

Standard

INDUCTION CURE TEST FOR METAL BONDING ADHESIVES

1987-05-01

HISTORICAL

J1851_198705

This SAE Recommended Practice defines a procedure for determining the adhesion strength characteristics of heat-cured metal bonding adhesives subjected to induction heating.