Refine Your Search

Date

Date

Topic

Topic

Metals Alloys Fuel systems Emissions Materials, Processes and Parts Council

Search Results

Viewing 1 to 20 of 64
123Next >Last >>
Sort by title
Standard

ABRASION RESISTANCE TESTING—VEHICLE EXTERIOR GRAPHICS AND PIN STRIPING
1989-06-01
HISTORICAL
J1847_198906
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
Standard

Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping
2021-01-07
CURRENT
J1847_202101
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
Standard

BALL JOINTS
1981-10-01
HISTORICAL
J490_198110
This SAE Standard covers the general and dimensional data for various types of ball joints with inch threads commonly used on control linkages in automotive, marine, and construction and industrial equipment applications.
Standard

BALL JOINTS
1996-09-01
HISTORICAL
J490_199609
This SAE Standard covers the general and dimensional data for various types of ball joints with inch threads commonly used on control linkages in automotive, marine, and construction and industrial equipment applications. Inasmuch as the load carrying and wear capabilities of ball joints vary considerably with their design and fabrication, it is suggested that the manufacturers be consulted in regard to these features and for recommendations relating to application of the different types and styles available. The inclusion of dimensional data in this standard is not intended to imply that all the products described are stock production sizes. Consumers are requested to consult with manufacturers concerning availability of stock production parts.
Standard

Ball Joints
2012-10-15
CURRENT
J490_201210
This SAE Standard covers the general and dimensional data for various types of ball joints with inch threads commonly used on control linkages in automotive, marine, and construction and industrial equipment applications. Inasmuch as the load carrying and wear capabilities of ball joints vary considerably with their design and fabrication, it is suggested that the manufacturers be consulted in regard to these features and for recommendations relating to application of the different types and styles available. The inclusion of dimensional data in this standard is not intended to imply that all the products described are stock production sizes. Consumers are requested to consult with manufacturers concerning availability of stock production parts.
Standard

COACH JOINT FRACTURE TEST
1993-11-01
HISTORICAL
J1863_199311
This SAE Recommended Practice defines a procedure for determining the cleavage strength of an adhesive used for bonding automotive oily metal substrates.
Standard

Coach Joint Fracture Test
2021-01-07
CURRENT
J1863_202101
This SAE Recommended Practice defines a procedure for determining the cleavage strength of an adhesive used for bonding automotive oily metal substrates.
Standard

ELECTROPLATING OF NICKEL AND CHROMIUM ON METAL PARTS—AUTOMOTIVE ORNAMENTATION AND HARDWARE
1985-02-01
HISTORICAL
J207_198502
This standard covers requirements for several types and grades of electrodeposited nickel/chromium coatings on ferrous or copper alloy basis metals and copper/nickel/chromium on zinc or aluminum alloys for the finishing and corrosion protection of decorative ornamentation and hardware of motor vehicles and marine controls and fittings. Four grades of coatings are provided to correlate with the service conditions under which each is expected to provide satisfactory performance, namely: very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix A.1 Information contained in this document generally conforms to the information contained in ASTM B 456, Specification for Electrodeposited Coatings of Nickel plus Chromium.
Standard

Electroplating of Nickel and Chromium on Metal Parts - Automotive Ornamentation and Hardware
2012-05-11
CURRENT
J207_201205
This standard covers requirements for several types and grades of electrodeposited nickel/chromium coatings on ferrous or copper alloy basis metals and copper/nickel/chromium on zinc or aluminum alloys for the finishing and corrosion protection of decorative ornamentation and hardware of motor vehicles and marine controls and fittings. Four grades of coatings are provided to correlate with the service conditions under which each is expected to provide satisfactory performance, namely: very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix A.1 Information contained in this document generally conforms to the information contained in ASTM B 456, Specification for Electrodeposited Coatings of Nickel plus Chromium.
Standard

Fuel and Oil Hoses
1998-06-01
HISTORICAL
J30_199806
This SAE Standard covers fuel and oil hose, coupled and uncoupled, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapor present in either the fuel system or in the crankcase of internal combustion engines in mobile, stationary, and marine applications. Sections 7 and 11 cover hose intended to meet the demands of fuel injection systems. Sections 10 and 11 cover hose intended to meet low fuel permeation requirements. Section 3 covers Coupled and Uncoupled Synthetic Rubber Tube and Cover (SAE 30R2). Section 4 covers Lightweight Braided Reinforced Lacquer, Cement, or Rubber Covered Hose (SAE 30R3). Section 5 covers Wire Inserted Synthetic Rubber Tube and Cover (SAE 30R5). Section 6 covers Low-Pressure Coupled and Uncoupled Synthetic Rubber Tube and Cover (SAE 30R6), (SAE 30R7), (SAE 30R8). Section 7 covers Fuel Injection Hose Medium-Pressure Coupled and Uncoupled Synthetic Rubber Tube and Cover (SAE 30R9).
Standard

GUIDELINES FOR LABORATORY CYCLIC CORROSION TEST PROCEDURES FOR PAINTED AUTOMOTIVE PARTS
1993-10-13
HISTORICAL
J1563_199310
These guidelines are intended for those engineers and scientists who evaluate the corrosion performance of painted automotive parts in laboratory cyclic tests. The guidelines are intended to help ensure that the results of the tests can be used to reach conclusions concerning the variables under study without being confounded by the test procedure itself. The guidelines also serve as a means to assist users of this type of test in obtaining good inter-laboratory agreement of results.
Standard

Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts
2016-04-05
CURRENT
J1563_201604
These guidelines are intended for those engineers and scientists who evaluate the corrosion performance of painted automotive parts in laboratory cyclic tests. The guidelines are intended to help ensure that the results of the tests can be used to reach conclusions concerning the variables under study without being confounded by the test procedure itself. The guidelines also serve as a means to assist users of this type of test in obtaining good inter-laboratory agreement of results.
123Next >Last >>
X