Refine Your Search

Search Results

Standard

Brazed Double Wall Low-Carbon Steel Tubing

2013-06-12
HISTORICAL
J527_201306
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

Brazed Double Wall Low-Carbon Steel Tubing

2017-10-25
CURRENT
J527_201710
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing

2013-05-14
HISTORICAL
J2592_201305
This SAE information report provides a means to understand the various methods of evaluating the integrity of steel tubing without the need of destroying the tubing. This report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The primary purpose of these methods of testing steel tubing is to look for flaws in the tubing, such as discontinuities, seams, cracks, holes, voids and other imperfections characteristic to the specific construction of the tubing.
Standard

Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing

2019-01-04
CURRENT
J2592_201901
This Information Report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The purpose of these testing methods is to expose flaws in the tube material or weld zone, such as discontinuities, seams, cracks, holes, voids, and other imperfections characteristic to the specific construction of the tubing. When agreed upon between the producer and purchaser, nondestructive testing is used in lieu of destructive hydrostatic pressure proof testing. Aircraft and Aerospace applications were not considered during the preparation of this document.
Standard

Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

2010-03-09
HISTORICAL
J2658_201003
This SAE standard recommends the use of ISO 19879 to perform various types of tests to evaluate functional performance requirements for carbon and steel alloy tube conductor assemblies for hydraulic fluid power applications made from both standard and non-standard metallic tubing and components. See the appropriate listed SAE or ISO tubing and connector standard for chemical, mechanical and dimensional requirements for standard tubing, end components and tube end joint configurations for the standard tube assemblies being tested. See SAE J1065 and ISO 10763 for listed nominal reference working pressures and/or reference formula that may be used to calculate referenceworking pressures for standard and non-standard metallic tube conductors.
Standard

Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

2013-09-25
CURRENT
J2658_201309
This SAE standard recommends the use of ISO 19879 to perform various types of tests to evaluate functional performance requirements for carbon and steel alloy tube conductor assemblies for hydraulic fluid power applications made from both standard and non-standard metallic tubing and components. See the appropriate listed SAE or ISO tubing and connector standard for chemical, mechanical and dimensional requirements for standard tubing, end components and tube end joint configurations for the standard tube assemblies being tested. See SAE J1065 and ISO 10763 for listed nominal reference working pressures and/or reference formula that may be used to calculate referenceworking pressures for standard and non-standard metallic tube conductors.
Standard

Fuel Injection Tubing

2013-12-17
CURRENT
J529_201312
This standard covers tubing intended for use as high pressure fuel injection lines on a range of engines requiring tubing no larger than ¼ in (6.35 mm) OD. The material and construction of the tubing shall be cold drawn annealed low carbon seamless steel of a quality suitable for cold swaging, cold upsetting, and cold bending.
Standard

Metallic Tube Conductor Assemblies for Fluid Power and General Use--Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

2003-07-29
HISTORICAL
J2658_200307
This SAE Standard specifies uniform methods for various typesof tests to evaluate functional performance requirements formetallic tube conductor assemblies for hydraulic fluid powerapplications made from both standard and non-standard metallictubing and components. See the appropriate listed SAE or ISOtubing and connector standard for chemical, mechanical anddimensional requirements for standard tubing, end components andtube end joint configurations for the standard tube assembliesbeing tested. See SAE J 1065 and ISO 10763 for listed nominalreference working pressures and/or reference formula that may beused to calculate reference working pressures for standard andnon-standard metallic tube conductors.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2009-09-28
HISTORICAL
J1065_200909
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2016-05-20
CURRENT
J1065_201605
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section.
Standard

Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement

2019-05-06
WIP
J2551/3

1.1 Purpose

SAE J2551-3 recommended practice provides recommendations for a procurement process for carbon, alloy and high strength low alloy steel tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application.

1.2 Field of Application

These recommended practices are intended for general application and hydraulic systems on industrial equipment and commercial products. Aircraft and Aerospace applications were not considered during the preparation of this document. Since many factors influence the pressure at which a hydraulic system will perform satisfactorily, these recommended practices should not be construed as guaranteed minimums. For any application, sufficient testing should be conducted and reviewed by both the user and supplier to ensure that required performance levels are met.

X