Refine Your Search

Search Results

Standard

Brazed Double Wall Low-Carbon Steel Tubing

2017-10-25
CURRENT
J527_201710
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

Brazed Double Wall Low-Carbon Steel Tubing

2013-06-12
HISTORICAL
J527_201306
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing

2013-05-14
HISTORICAL
J2592_201305
This SAE information report provides a means to understand the various methods of evaluating the integrity of steel tubing without the need of destroying the tubing. This report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The primary purpose of these methods of testing steel tubing is to look for flaws in the tubing, such as discontinuities, seams, cracks, holes, voids and other imperfections characteristic to the specific construction of the tubing.
Standard

Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing

2019-01-04
CURRENT
J2592_201901
This Information Report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The purpose of these testing methods is to expose flaws in the tube material or weld zone, such as discontinuities, seams, cracks, holes, voids, and other imperfections characteristic to the specific construction of the tubing. When agreed upon between the producer and purchaser, nondestructive testing is used in lieu of destructive hydrostatic pressure proof testing. Aircraft and Aerospace applications were not considered during the preparation of this document.
Standard

Fuel Injection Tubing

2013-12-17
CURRENT
J529_201312
This standard covers tubing intended for use as high pressure fuel injection lines on a range of engines requiring tubing no larger than ¼ in (6.35 mm) OD. The material and construction of the tubing shall be cold drawn annealed low carbon seamless steel of a quality suitable for cold swaging, cold upsetting, and cold bending.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2009-09-28
HISTORICAL
J1065_200909
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2016-05-20
CURRENT
J1065_201605
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section.
Standard

Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement

2019-05-06
WIP
J2551/3

1.1 Purpose

SAE J2551-3 recommended practice provides recommendations for a procurement process for carbon, alloy and high strength low alloy steel tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application.

1.2 Field of Application

These recommended practices are intended for general application and hydraulic systems on industrial equipment and commercial products. Aircraft and Aerospace applications were not considered during the preparation of this document. Since many factors influence the pressure at which a hydraulic system will perform satisfactorily, these recommended practices should not be construed as guaranteed minimums. For any application, sufficient testing should be conducted and reviewed by both the user and supplier to ensure that required performance levels are met.

Standard

Seamless Copper Tube

2006-06-29
CURRENT
J528_200606
This SAE Standard covers minimum requirements for soft (061) annealed seamless copper tube intended for automotive and general purposes. (Comparable specifications are ASTM B 75. Other copper tube is covered in SAE J463.) The tube shall be cold drawn to size and after forming shall be annealed in such a manner as to produce a finished product which will meet all requirements of this standard.
Standard

Seamless Copper-Nickel 90-10 Tubing

2011-12-06
CURRENT
J1650_201112
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Seamless Copper-Nickel 90-10 Tubing

1993-03-01
HISTORICAL
J1650_199303
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Tests and Procedures for Carbon Steel and High Strength Low Alloy Steel Tubing

2016-12-07
CURRENT
J1677_201612
This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and high strength, low alloy steel tubing as listed in section 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications.
Standard

Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing

2017-10-12
CURRENT
J2613_201710
This SAE Standard covers sub-critically annealed or normalized electric resistance welded flash controlled single-wall high strength steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the ID weld bead. Nominal reference working pressures for this tubing are listed in ISO 10763 for metric tubing and SAE J1065 for inch tubing. This specification also covers SAE J2613 Type-A tubing. The mechanical properties and performance requirements of standard SAE J2613 and SAE J2613 Type-A are the same. The designated differences of Type-A tubing do not imply that Type-A tubing is in anyway inferior to standard SAE J2613.
X