Search Results

According to the Fatality Analysis Reporting System (FARS, 1995-2004), over 20 percent of fatal frontal crashes are into fixed narrow objects such as trees and utility poles in real world crashes. The Insurance Institute for Highway Safety (IIHS) has studied the frontal pole impact test since 2005, conducting a series of tests using passenger cars that are rated “Good” from the IIHS frontal offset test. Passenger cars were impacted into a 10-inch-diameter rigid pole at 64-kph. The alignment of the pole along the centerline of the vehicles in frontal impact was varied to study the influence on dummy injury metrics. This paper evaluates the frontal center pole test conducted by the IIHS. The IIHS tests 21 crashes impacted by the rigid pole using 5 vehicle models with two dummies in the front seat. Intrusions and dummy readings were reviewed according to the frontal offset rating criteria of the IIHS for structural performance and injury measurement.

The National Highway Traffic Safety Administration (NHTSA) conducted a total of 28 frontal crashes in the New Car Assessment Program (NCAP) involving the 10-year-old child Hybrid III dummy. The 10-year-old child dummy was in the rear seat. All types of vehicles (passenger cars, sport utility vehicles, vans and pick-up trucks) were tested to assess the effect of restraint systems such as booster and pretensioner on the rear seat occupant. In this study, the readings of the 10-year-old child dummy in rear-left and rear-right seat positions are examined. The authors apply a possible 5 star rating system, based on head and chest readings of the 10-year-old dummy. The paper also assesses the safety performance of rear seat occupants and the effect of the restraint systems on a child in the rear seat. This paper suggests that a star rating for rear seat occupants is independent of the present ratings for the driver and front adult passenger in NCAP.

Since 1990, the National Highway Traffic Safety Administration (NHTSA) implemented a dynamic side impact compliance test. This compliance test, Federal Motor Vehicle Safety Standard (FMVSS) No. 214, is a nearly right angle side impact in which the striking vehicle moves at 53.6 kmph into the struck vehicle. In 1997, NHTSA began testing passenger cars in side impact in the New Car Assessment Program (NCAP). In the USA NCAP side impact, the striking vehicle is towed at a 8 kmph higher speed than in the compliance test. An analysis has begun on the data from the first NCAP side impact tests, thirty-two in number. In the crashes, accelerometers were installed in the door and door frames of the struck vehicle. Using the accelerometers on the vehicle structure and in the side impact dummy, the crash event was investigated. One tool used in the investigation was the velocity-versus-time diagram.

Accident cases are examined to determine the injury mechanism for foot/ankle moderate and greater injuries in vehicle crashes. The authors examine 480 in-depth cases from the National Accident Sampling System for the years 1979 through 1987. An injury mechanism - a description of how the foot/ankle physically interacted with the interior of the vehicle - is assigned to each of the injured occupants. For the accidents in which the 480 occupants were injured, the more prominent types of vehicle collisions are characterized.

Frontal sled tests of the Part 572, APR, and Hybrid III dummies were conducted in a three-point restraint system at 50 km/hr velocity change. The tests were conducted to evaluate the dummy responses in a tightly controlled systems environment, and to compare the dummy responses to previously established cadaver responses from the same environment. The Hybrid III dummy measurement repeatability was found to be better than either the Part 572 or APR dummies, although the thoracic acceleration responses from all three are shown to be quite similar to cadavers. Correlation of the dummy measurements are made to a limited amount of both the cadaver data and accident data from the National Crash Severity Study.

The frontal crash standard in the USA specifies that the full front of a vehicle impact a rigid barrier. Subsequently, the European Union developed a frontal crash standard that requires 40 percent of the front of a vehicle to impact a deformable barrier. The present study conducted paired crashes of vehicles using the full-frontal barrier procedure and the 40 percent offset deformable barrier procedure. In part, the study was to examine the feasibility of adding an offset test procedure to the frontal crash standard in the USA. Frontal-offset and full-frontal testing was conducted using both the mid-size (50th percentile male Hybrid III) and the small stature (5th percentile female Hybrid III) dummies. Five vehicle models were used in the testing: Dodge Neon, Toyota Camry, Ford Taurus, Chevrolet Venture and Ford Contour. In the crash tests, all dummies were restrained with the available safety belt systems and frontal air bags.

This paper is part of a four year study to systematically define side impact injury in terms of the kinetic response of a suitable anthropomorphic dummy. Last year a paper was presented at the Experimental Safety Vehicle Conference in Germany which analyzed side impact dummy response and injury prediction based on cadaver data generated by the Highway Safety Research Institute. These subjects were generally older than those discussed in the current paper. This paper includes data from a number of University of Heidelberg cadaver sled tests-including padding tests which we recently found to be (1) critical for a definitive analysis and (2) previously not available. Two advanced dummies, whose design specifications are based upon biomechanical data, are currently being evaluated by the biomechanical community. The two dummies are (1) a Side Impact Dummy (SID) designed by the Highway Safety Research Institute (HSRI) and (2) the Association Peugeot-Renault (APR) dummy from France.

Since 1976, the National Highway Traffic Safety Administration (NHTSA) has pursued biomechanical research concerning lateral impacts to automotive occupants. These efforts have included (a) the generation of an experimental data base containing both detailed engineering and physiological responses of human surrogates experiencing lateral impacts, (b) the analysis of this data base to develop both an injury index linking the engineering parameters to an injury severity level and response corridors to guide in the design of a test dummy, and (c) the development and refinement of a side impact test dummy suitable for use in safety systems development and evaluation. The progress of these efforts has been periodically reported in the literature [1-17]* and these references document the evolutionary trail NHTSA has followed over the duration of this research program.

A series of seventy-two pendulum-type impact tests were performed on six NHTSA Side Impact Dummies (SID) to assess dummy repeatability and reproducibility. A quantity called the Normalized Integral Square Error (NISE) is used to quantify the difference between acceleration responses from repeat tests. Limits for the NISE are developed to define acceptable differences in terms of phase shift, amplitude, and shape. Results indicate that the SID is repeatable in all of the test cases considered and fairly reproducible in 90° lateral impacts although this is not shown conclusively. Before the testing could be performed it was necessary to correct several durability problems with the SID that were identified while early production versions of the dummy were being tested. These modifications are described briefly.

Axial loading of the calcaneus-talus-tibia complex is an important injury mechanism for moderate and severe vehicular foot-ankle trauma. To develop a more definitive and quantitative relationship between biomechanical parameters such as specimen age, axial force, and injury, dynamic axial impact tests to isolated lower legs were conducted at the Medical College of Wisconsin (MCW). Twenty-six intact adult lower legs excised from unembalmed human cadavers were tested under dynamic loading using a mini-sled pendulum device. The specimens were prepared, pretest radiographs were taken, and input impact and output forces together with the pathology were obtained using load cell data. Input impact forces always exceeded the forces recorded at the distal end of the preparation. The fracture forces ranged from 4.3 to 11.4 kN.

The research question investigated in this study is what are the key attributes of foot and ankle injury in the between-rail frontal crash? For the foot and ankle, what was the type of interior surface contacted and the type of resulting trauma? The method was to study with in-depth case reviews of NASS-CDS cases where a driver suffered an AIS=2 foot or ankle injury in between-rail crashes. Cases were limited to belted occupants in vehicles equipped with air bags. The reviews concentrated on coded and non-coded data, identifying especially those factors contributing to the injuries of the driver's foot/ankle. This study examines real-world crash data between the years 1997-2009 with a focus on frontal crashes involving 1997 and later model year vehicles. The raw data count for between-rail crashes was 732, corresponding to 227,305 weighted, tow-away crashes.

NHTSA conducted seventy-six side impact FMVSS No. 214 compliance tests from 1994 through 1997. The compliance tests are nearly right angle side impacts with low longitudinal components of change of velocity (Δv). Frontal air bag deployments were found to have occurred for 34% of the driver bags and 32% of the front passenger bags in these compliance-tested passenger cars. In 1997, NHTSA began testing passenger cars 'in side impact in the New Car Assessment Program (NCAP). The NCAP crash tests are conducted at a higher speed than the compliance tests. The cars in the NCAP side impact tests also had low longitudinal components of Δv. Approximately 40% of the twenty-six passenger cars tested in the 1997 Side Impact NCAP had their frontal air bags deploy. Real world crash data were examined to determine if frontal air bags are deploying in right angle side impacts on the roads of the US.

This investigation addresses and evaluates: (1) belted drivers in frontal crashes; (2) crashes divided into low, medium, and high severity; (3) air-bag-equipped passenger vehicles separated into either model years 1985 - 1997 (with airbags) or model years 1998 - 2008; (4) rate of Harm as a function of crash severity and vehicle model year; and (5) injury patterns associated with injured body regions and the involved physical components, by vehicle model year. Comparisons are made between the injury patterns related to drivers seated in vehicles manufactured before 1998 and those manufactured 1998 or later. The purpose of this comparative analysis is to establish how driver injury patterns may have changed as a result of the introduction of more recent safety belt technology, advanced airbags, or structural changes.

Lateral impacts have been shown to produce a large portion of both serious and fatal injuries within the total automotive crash problem. These injuries are produced as a result of the rapid changes in velocity that an automobile occupant's body experiences during a crash. In an effort to understand the mechanisms of these injuries, an experimental program using human surrogates (cadavers) was initiated. Initial impact velocity and compliance of the lateral impacting surface were the primary test features that were controlled, while age of the test specimen was varied to assess its influence on the injury outcome. Instrumentation consisted of 24 accelerometer channels on the subjects along with contact forces measured on the wall both at the thoracic and pelvic level. The individual responses and resulting injuries sustained by 11 new subjects tested at the University of Heidelberg are presented in detail.

This study assessed the primary involved physical components attributed to the head and face injuries of child occupants seated directly adjacent to the stuck side of a vehicle in a side impact collision. The findings presented in this study were based upon analysis of the National Automotive Sampling System/Crashworthiness Data System (NASS/CDS) for the years 1993–2007. Injury analysis was conducted for those nearside child occupants aged between 1–12 years-old. The involved children were classified as toddler-type, booster-type, or belted-type occupants. These classifications were based upon the recommended restraint system for the occupant. Injury mechanisms were assessed for the child occupants in each of the three groups. A detailed study of NASS/CDS cases was conducted to provide a greater understanding of the associated injury mechanisms.

For children seated next to the struck side, real-world crash outcome was determined for the rear-seat of passenger vehicles over the entire range of side impact crash severities. The method was first to calculate the actual risk for an occupant based on field data. The data sources were non-rollover, tow-away crashes from the 1997 - 2009 National Automotive Sampling System. By limiting the struck passenger vehicle to model year 1985 or newer, field data were identified for a total of 588 children. In all crashes, the child was seated in the rear-seat area on the struck side of the passenger vehicle. A matrix of MADYMO model simulations calculated the response of child dummies over the entire range of the field data. Age-dependent, moderate-to-serious (AIS ≥ 2) injury risk curves were derived and evaluated for children in side impact. Risks to the children were calculated by combining the derived child risk curves with the MADYMO model simulations.

Nineteen sled impact tests were conducted simulating a frontal collision exposure for an unrestrained driver. The deceleration sled buck configuration utilized the passenger compartment of a late model compact passenger vehicle, a rigid driver's seat, and a custom fabricated energy-absorbing steering column and wheel assembly. Sled impact velocities ranged from 24.1 to 42.6 km/hr. The purpose of the study was to investigate the kinematic and kinetic interaction of the driver and the energy-absorbing steering assembly and their relationship to the thoracic/abdominal injuries produced. The similarities and differences between human cadaver and anthropomorphic dummy subjects were quantified.

This study investigated the mechanisms of traumatic rupture of the aorta (TRA). Eight unembalmed human cadavers were tested using various dynamic blunt loading modes. Impacts were conducted using a 32-kg impactor with a 152-mm face, and high-speed seatbelt pretensioners. High-speed biplane x-ray was used to visualize aortic motion within the mediastinum, and to measure deformation of the aorta. An axillary thoracotomy approach was used to access the peri-isthmic region to place radiopaque markers on the aorta. The cadavers were inverted for testing. Clinically relevant TRA was observed in seven of the tests. Peak average longitudinal Lagrange strain was 0.644, with the average peak for all tests being 0.208 ± 0.216. Peak intraluminal pressure of 165 kPa was recorded. Longitudinal stretch of the aorta was found to be a principal component of injury causation. Stretch of the aorta was generated by thoracic deformation, which is required for injury to occur.

A study of frontal collisions using the NASS data base showed that there were four times as many arm injuries to belt restrained drivers who had an air bag deploy than for the drivers who were simply belted. By far, the distal forearm/hand was the most commonly injured region. Hard copy review identified two modes of arm injury related to the deploying air bag: 1) The arm is directly contacted by the air bag module and/or flap cover, and 2) The arm is flung away and contacts an interior car surface. Based on the field studies, a mechanical device called the Research Arm Injury Device (RAID) was fabricated to assess the aggressivity of air bags from different manufacturers. Results from static air bag deployment tests with the RAID suggested that the RAID was able to clearly distinguish between the aggressive and non-aggressive air bags. Maximum moments ranging between 100 Nm and 650 Nm, and hand fling velocity ranging between 30 and 120 km/h were measured on the RAID in these tests.

A number of tests conducted under the sponsorship of the FAT were reported in papers at two previous Stapp Conferences and an Experimental Safety Vehicle Conference. These tests featured human cadavers and three different Anthropomorphic Test Devices (ATD) designed for use in lateral impacts. Test subjects were placed in Opel car bodies and impacted laterally by CCMC moving deformable barriers. In the previous papers, the reported responses of the human cadavers had wide variability and none of the ATD's studied featured good biofidelity. In this effort, a reexamination of the available data was undertaken and the process and results of applying different analysis techniques to the cadaver data, which resulted in significantly reduced scatter and variability, are discussed. Comparisons of the impact responses of the cadavers and the NHTSA developed Side Impact Dummy are also made.