Search Results

Vehicle aerodynamic development is normally undertaken in smooth flow wind tunnels. In contrast, the on-road environment is turbulent, with variations in the relative velocity experienced by the moving vehicle caused mainly by the effects of atmospheric turbulence. In this review the turbulence inherent in the atmosphere is considered, following the approach of wind engineers. The variations of atmospheric wind velocity with time, height, terrain and thermal stratification are summarised and discussed. Statistical parameters presented include mean velocity, turbulence intensities, spectra and probability density functions. The resulting fluctuating approach flow (relative velocity) of the moving vehicle is then considered. The effect of the fluctuating velocity field on parameters of interest to vehicle aerodynamicists (such as aerodynamic noise) are made.

Future generation road networks are intended to feature improved throughput and significantly reduced fleet energy consumption. ‘Platooning’ arranges moving vehicles in close longitudinal convoy, and is viewed as a core aspect of such technologies. The aerodynamic performance of platoons potentially allows increased traffic throughput and a useful energy reduction; however the magnitude of this reduction varies significantly with inter-vehicle spacing. For some vehicles in platoons under specific conditions, the resulting aerodynamic performance may actually worsen [2]. This work attempts to deconstruct relationships between two key vehicle geometries and their aerodynamic performance in platoons. A study of homogeneous and heterogeneous platoons using common reference models is presented.

The paper presents experimental analysis of the airflow around the differential center housing of a rear drive full-scale passenger car. The study included investigation of local airflow total and static pressure, as well as surface flow visualization. Estimation of the local airflow velocity is based on the measured pressure coefficients. The experiments were carried out at different test facilities: in a climatic wind tunnel, in a full-scale wind tunnel and on-road. Influence of side wind was modeled by the yawing of the car in the full-scale wind tunnel. The results show the asymmetrical structure of the flow in both, vertical and horizontal planes. Estimated longitudinal relative local velocity decreases from maximum Vr ≈ 0.4 at the lower surface of the center housing, to about Vr ≈ 0 above the upper surface. Side wind increases airflow velocity around the center housing within the investigated yaw range ± 20°

Noise in passenger cars is dependent upon the fluctuating surface pressures on the exterior, particularly in the region of the A-pillar and the front side glass. The purpose of this work was to investigate whether the fluctuating surface pressure profile obtained in a typical full-size automotive wind tunnel can be duplicated within the limitations of high blockage tunnel. A further aim was to compare the data from both wind tunnels with road data. In order to investigate the spatial resolution of fluctuating pressures on the side window of a car, flush mounted microphones were used as fluctuating pressure transducers. Mean pressure coefficients were obtained from flush-mounted pressure taps in the same locations. Frequency based (spectral) analysis was carried out on the fluctuating pressure signal. It was found that the regions of flow separation coincide with the regions of maximum fluctuating pressure.

Separated flow is the main generator of aerodynamic noise in passenger vehicles. The flow around the A-pillar is central to the wind noise as many modern vehicles still have high fluctuating pressures due to flow separations in this region. Current production vehicle geometry is restricted due to the amount of three dimensionality possible in laminated windscreen glass (and door opening etc). New materials (e.g., polycarbonate) offer the possibility of more streamlined shapes which allow less or no flow separation. Therefore, a series of experimental investigations have been conducted to study the effects of the A-pillar and windshield geometry and yaw angles on the local flow and noise using a group of idealised road vehicle models. Surface mean and fluctuating pressures were measured on the side window in the A-pillar regions of all models at different Reynolds numbers and yaw angles.

Green racing technologies are described with a focus on two categories of sustainable racing; solar racing, including an overview of the World Solar Challenge (WSC) held in Australia, and Formula SAE-E (Society of Automotive Engineers-Electric). Both types of cars utilise sustainably generated electricity, the former uses solar arrays integrated into the vehicle body and the latter electricity generated from a renewable energy park and stored onboard in lithium polymer cells. The design considerations of both vehicles are contrasted with a focus on energy usage minimisation. The Aurora team (which has broken many records, including winning the World Solar Challenge across Australia) is used to illustrate the importance of minimizing the power requirements by having a low aerodynamic drag, frontal area, a highly efficient powertrain and low rolling resistance. To illustrate the technology behind FSAE Electric the R10E car from RMIT is described.

The function of a rear view mirror is a determining factor in its shape - resulting in a flat rear mirrored face. The resulting bluff body generates unsteady base pressures which generate unsteady forces, leading to movement of the mirror surface and potential image blurring. The objective of this paper was to experimentally determine the fluctuating base pressure on a standard and modified mirror. Half a full-size vehicle was utilised, fixed to the side wall of a wind tunnel. A dynamically responsive multi channel pressure system was used to record the pressures. The modification to the mirror consisted of a series of extensions to the mirror rim, to see if this method would attenuate the fluctuating base pressures. It was found that increasing the length of the extension changed the pressure pattern across the face, and the over all magnitude of the fluctuations reduced with increasing length of extension. It was recommended to further the work via phase measurements.

Future Generation Intelligent Transport Systems (FGITS) will likely implement solutions to increase traffic density and thus throughput on existing infrastructures. Platooning (e.g. the close coupling of vehicles) may be a prominent feature of this solution, placing an understanding of near wake flows paramount to the FGITS case. However the notion of vehicles spaced at greater intervals is not only more commonly associated with present day conditions; it is furthermore characteristic of mixed-fleet conditions. These are likely to span the significant era between present day and complete FGITS fleets. Thus, far wake flows are similarly relevant. Near and far wake analysis of a variable geometry Ahmed Model (a research form able to replicate structured wakes pertinent to practical vehicle flows) is used to explore relevant generic flow structures.

This paper is the first of two papers that address the simulation and effects of turbulence on surface vehicle aerodynamics. This, the first paper, focuses on the characteristics of the turbulent flow field encountered by a road vehicle. The natural wind environment is usually unsteady but is almost universally replaced by a smooth flow in both wind tunnel and computational domains. In this paper, the characteristics of turbulence in the relative-velocity co-ordinate system of a moving ground vehicle are reviewed, drawing on work from Wind Engineering experience. Data are provided on typical turbulence levels, probability density functions and velocity spectra to which vehicles are exposed. The focus is on atmospheric turbulence, however the transient flow field from the wakes of other road vehicles and roadside objects are also considered.

Wind noise sources are described including those from the A-pillar region, cavities and bluff bodies. Hydrodynamic pressure fluctuations results from flow separations (in such areas as the A-pillars and mirrors) that generate relatively broad band in-cabin noise. The influence on local radii of the A-pillar is outlined and shown to be a dominant factor in determining hydrodynamic pressure fluctuations in the side-glass regions. Small cavities (eg. styling or water management channels on the mirror casing) generate high-frequency acoustic tones that can also be heard in the cabin and an example of tones from a whistling mirror cavity is shown. A spectrogram of in-cabin noise obtained whilst driving in strong winds is used to illustrate the variability of noise that can be heard on-road and to consider the influence of the relative wind speed.

Wind tunnels provide a convenient, repeatable method of assessing vehicle engine cooling, yet important draw-backs are the lack of a moving ground and rotating wheels, blockage constraints and, in some tunnels, the inability to simulate ambient temperatures. A series of on-road and wind-tunnel experiments has been conducted to validate a process for evaluating vehicle cooling system performance in a high blockage aerodynamic wind tunnel with a fixed ground simulation. Airflow through the vehicle front air intake was measured via a series of pressure taps and the wind-tunnel velocity was adjusted to match the corresponding pressures found during the road tests. In order to cope with the inability to simulate ambient temperatures, the technique of Specific Dissipation (SD) was used (which has previously been shown to overcome this problem).