Refine Your Search

Topic

Search Results

Standard

Cast Shot and Grit Size Specifications for Peening and Cleaning

2017-10-10
CURRENT
J444_201710
This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E 11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.
Standard

Cast Shot and Grit Size Specifications for Peening and Cleaning

2012-09-17
HISTORICAL
J444_201209
This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E 11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.
Standard

Cut Wire Shot

2018-07-23
WIP
J441
This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.
Standard

Cut Wire Shot

2013-10-16
CURRENT
J441_201310
This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.
Standard

Cut Wire Shot

1993-06-01
HISTORICAL
J441_199306
This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.
Standard

Cut Wire Shot

1987-05-01
HISTORICAL
J441_198705
This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.
Standard

Definition for Particle Size

2011-06-01
CURRENT
J391_201106
"Effective particle or domain size" is a phrase used in X-ray diffraction literature to describe the size of the coherent regions within a material which are diffracting. Coherency in this sense means diffracting as a unit. Small particle size causes X-ray line broadening and as such can be measured. It has been shown related to substructure as observed in transmission electron microscopy. Particle size is affected by hardening, cold working, and fatigue; conversely, there is increasing evidence that particle size, per se, affects both static and dynamic strength.
Standard

Definitions for Macrostrain and Microstrain

2011-08-04
CURRENT
J932_201108
In the analysis and measurement of residual stresses of materials, it has been noted that there are frequently differences in interpretation of the terms "macrostrain" and "microstrain." To assist communication among research personnel in this area, definitions for these two terms are suggested by the Fatigue Design and Evaluation Committee of SAE. Since "macrostress" is commonly computed from "macrostrain" in residual stress analysis, to be consistent, the definitions given are for "macrostrain" and "microstrain."
Standard

High-Carbon Cast-Steel Grit

2013-10-16
HISTORICAL
J1993_201310
This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.
Standard

High-Carbon Cast-Steel Grit

2019-02-21
CURRENT
J1993_201902
This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.
Standard

High-Carbon Cast-Steel Grit

1993-03-01
HISTORICAL
J1993_199303
This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.
Standard

High-Carbon Cast-Steel Shot

2019-10-31
CURRENT
J827_201910
This SAE Recommended Practice describes chemical composition and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.
Standard

High-Carbon Cast-Steel Shot

2013-10-16
HISTORICAL
J827_201310
This SAE Recommended Practice describes chemical composition and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.
Standard

High-Carbon Cast-Steel Shot

1969-01-01
HISTORICAL
J827_196901
This SAE Recommended Practice describes chemical composition, and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.
Standard

High-Carbon Cast-Steel Shot

1962-06-01
HISTORICAL
J827_196206
This SAE Recommended Practice describes chemical composition, and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.
Standard

High-Carbon Cast-Steel Shot

1994-07-01
HISTORICAL
J827_199407
This SAE Recommended Practice describes chemical composition, and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.
Standard

High-Carbon Cast-Steel Shot

1990-03-01
HISTORICAL
J827_199003
This SAE Recommended Practice describes chemical composition, and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.
Standard

Medical Device Shot Peening

2019-05-09
WIP
J3020
This SAE Standard and its supplementary detail specifications cover the engineering requirements for the controlled shot peening of a medical device where shot peening is required for enhancement of a material's mechanical properties through the intentional creation of compressive residual stress.
Standard

Medical Device Shot Peening

2014-05-07
CURRENT
J3020_201405
This SAE Standard and its supplementary detail specifications cover the engineering requirements for the controlled shot peening of a medical device where shot peening is required for enhancement of a material's mechanical properties through the intentional creation of compressive residual stress.
X