Search Results

Standard

Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment

2017-08-22

WIP

J2357

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, design requirements and design guidelines for electronic devices.

Standard

Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment

2012-11-01

CURRENT

J2357_201211

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, design requirements and design guidelines for electronic devices.

Standard

Application guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment

2000-01-01

HISTORICAL

J2357_200001

The purpose of this SAE Recommended Practice is to aid in the effective application of automotive exterior lighting equipment driven by electronic devices. This document covers integral and non-integral systems including electronically driven Fog lamps.

Standard

Camera-based Light Measurement Techniques

2014-06-26

WIP

J3100

This recommended practice describes the application of digital cameras to measurement of photometric quantities in the photometric laboratory.

Standard

Color Specification

2002-07-01

HISTORICAL

J578_200207

This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including lamps and reflex reflectors. The document applies to the overall effective color of light emitted by the device in any given direction and not to the color of the light from a small area of the lens. It does not apply to pilot, indicator, or tell-tale lights.

Standard

Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis

2013-03-05

HISTORICAL

J2999_201303

This SAE Standard provides a method for determining the Effective Projected Luminous Lens Area (EPLLA) of a lamp function using design analysis. This standard was created to clarify and address how to determine EPLLA with traditional and new technologies. Lamps can be evaluated using the method described in SAE J3333; however, no lamp is subjected to both methods.

Standard

Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis

2023-02-06

WIP

J2999

This SAE Standard provides a method for determining the Effective Projected Luminous Lens Area (EPLLA) of a lamp function using design analysis. This standard was created to clarify and address how to determine EPLLA with traditional and new technologies.

Standard

Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis

2017-06-09

CURRENT

J2999_201706

This SAE Standard provides a method for determining the Effective Projected Luminous Lens Area (EPLLA) of a lamp function using design analysis. This standard was created to clarify and address how to determine EPLLA with traditional and new technologies.

Standard

FMVSS 108 Adaptive Driving Beam test parameter clarification

2022-10-14

WIP

J3288

Provide industry consensus for various aspects of the FMVSS 108 Adaptive Driving Beam requirements where further clarification is required to promote repeatability and reproducibility of the testing.

Standard

LIGHTING EQUIPMENT FOR MOTOR VEHICLES

1961-06-01

HISTORICAL

J575_196106

This standard covers the requirements and methods for laboratory test—including vibration, moisture, dust, corrosion, color, and photometric tests for: Sealed Beam Headlamp Units for Motor Vehicles—SAE J579 Sealed Beam Headlamp—SAE J580 Electric Supplementary Driving Lamps—SAE J581 Electric Supplementary Passing Lamps—SAE J582 Fog Lamps—SAE J583 Motorcycle and Motor Driven Cycle Headlamps—SAE J584 Tail Lamps—SAE J585 Stop Lamps—SAE J586 License Plate Lamps—SAE J587 Turn Signal Lamps—SAE J588a Turn Signal Operating Units—SAE J589 Spot Lamps—SAE J591 Clearance, Side Marker, Identification, and Parking Lamps—SAE J592 Back-Up Lamps—SAE J593 Reflex Reflectors—SAE J594 Emergency Reflex Reflectors—SAE J774 Warning Signal Lamps for School Buses and Emergency Vehicles—SAE J595 Electric Emergency Lanterns—SAE J596 Liquid Burning Emergency Flares—SAE J597

Standard

PHOTOMETRY LABORATORY ACCURACY GUIDELINES

1982-08-01

HISTORICAL

J1330_198208

The purpose of this information report is to list and explain major equipment, instrumentation, and procedure variables which can affect inter-laboratory differences and repeatability of photometric measurements of various lighting devices listed in SAE Standards and Recommended Practices. The accuracy guidelines listed in the report are for the purpose of controlling variables that are not a direct function of the lighting device being measured. The control of these individual variables is necessary to control the overall accuracy of photometric measurements. These accuracy guidelines apply to the measurement of the luminous intensities and reflected intensities of devices at the specified geometrically distributed test points and areas. These guidelines do not apply to photometric equipment used to measure license plate lamps.

Standard

Photometry Laboratory Accuracy Guidelines

2017-04-24

WIP

J1330

The purpose of this SAE Information Report is to list and explain major equipment, instrumentation, and procedure variables which can affect inter-laboratory differences and repeatability of photometric measurements of various lighting devices listed in SAE Technical Reports. The accuracy guidelines listed in the report are for the purpose of controlling variables that are not a direct function of the lighting device being measured. The control of these individual variables is necessary to control the overall accuracy of photometric measurements. These accuracy guidelines apply to the measurement of the luminous intensities and reflected intensities of devices at the specified geometrically distributed test points and areas. These guidelines do not apply to photometric equipment used to measure license plate lamps.

Standard

Photometry Laboratory Accuracy Guidelines

2000-03-17

HISTORICAL

J1330_200003

The purpose of this SAE Information Report is to list and explain major equipment, instrumentation, and procedure variables which can affect inter-laboratory differences and repeatability of photometric measurements of various lighting devices listed in SAE Technical Reports. The accuracy guidelines listed in the report are for the purpose of controlling variables that are not a direct function of the lighting device being measured. The control of these individual variables is necessary to control the overall accuracy of photometric measurements. These accuracy guidelines apply to the measurement of the luminous intensities and reflected intensities of devices at the specified geometrically distributed test points and areas. These guidelines do not apply to photometric equipment used to measure license plate lamps.

Standard

SAE MINIATURE BULB VIBRATION TEST

1995-05-01

HISTORICAL

J1765_199505

This SAE Recommended Practice was designed to be an accelerated vibration test that subjects bulbs to critical vibration/shock loading typically observed in normal vehicle service and can be employed for conformance of production (COP) testing. The test was designed for external vehicle applications.

Standard

TEST FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

1967-08-01

HISTORICAL

J575D_196708

This standard covers standardized basic tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Standards, Recommended Practices and Information Reports. Table 1 provides a convenient reference indicating which of these tests and requirements in this standard apply to each device or component.

Standard

TEST FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

1966-06-01

HISTORICAL

J575C_196606

This standard covers standardized basic tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Standards, Recommended Practices and Information Reports. Table 1 provides a convenient reference indicating which of these tests and requirements in this standard apply to each device or component.

Standard

TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

1980-06-01

HISTORICAL

J575_198006

This standard covers standardized basic tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Standards, Recommended Practices, and Information Reports.

Standard

TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

1983-07-01

HISTORICAL

J575_198307

This technical report provides standardized laboratory tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE technical reports.

Standard

TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

1977-09-01

HISTORICAL

J575G_197709

This standard covers standardized basic tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Standards, Recommended Practices, and Information Reports.

Standard

TESTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS

1970-08-01

HISTORICAL

J575E_197008

This standard covers standardized basic tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Standards, Recommended Practices and Information Reports.