Refine Your Search

Date

Date

Topic

Topic

Wheels Truck and Bus Brake Supply and Control Components Committee Regulations Durability Chassis Seals and gaskets Quality, Reliability, and Durability

Search Results

Viewing 1 to 20 of 65
123Next >Last >>
Sort by title
Standard

AIR BRAKE GLADHAND SERVICE (CONTROL) AND EMERGENCY (SUPPLY) LINE COUPLERS
1967-11-01
HISTORICAL
J318_196711
This SAE Recommended Practice is intended to provide a design, critical dimensions, performance requirements, and identification for gladhand-type air line couplers used to connect the brake systems of trucks, truck-tractors, and trailers when these vehicles are joined to operate as a combination unit.
Standard

AIR BRAKE VALVE - PERFORMANCE REQUIREMENTS
1986-07-01
HISTORICAL
J1410_198607
This practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include:
Standard

AIR BRAKE VALVES TEST PROCEDURE
1988-06-01
HISTORICAL
J1409_198806
This practice establishes uniform test procedures for air brake systems pneumatic valves with respect to:
Standard

AIR BRAKE VALVE—PERFORMANCE REQUIREMENTS
1986-10-01
HISTORICAL
J1410_198610
This practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAEJ1409. The performance requirements will include:
Standard

AIR RESERVOIR CAPACITY PERFORMANCE GUIDE—COMMERCIAL VEHICLES
1997-07-01
HISTORICAL
J1609_199707
This SAE Recommended Practice establishes performance guidelines for the capacity of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies, with GVWRs over 10 000 lb, designed to be used on the highway in commercial operations.
Standard

AUTOMOTIVE AND OFF-HIGHWAY AIR BRAKE RESERVOIR PERFORMANCE AND IDENTIFICATION REQUIREMENTS
1985-08-01
HISTORICAL
J10_198508
This standard applies to all new production air brake reservoirs used in automotive vehicles and off-road machines. This standard defines an "air brake reservoir" as a reservoir having single or multiple compartments that is used for storage of compressed air. This standard does not apply to accumulators or reservoirs for storage of gases other than compressed air. The reservoirs tested per these requirements shall be selected from production stock and shall be equipped with all permanently attached items such as mounting brackets and fitting bosses.
Standard

Air Brake Valve - Performance Requirements
2020-12-18
CURRENT
J1410_202012
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve - Performance Requirements
2011-02-18
HISTORICAL
J1410_201102
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve - Performance Requirements
2016-07-20
HISTORICAL
J1410_201607
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve Input-Output Characteristic Requirements
2016-06-17
CURRENT
J1861_201606
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements
2007-01-19
HISTORICAL
J1861_200701
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements
2011-09-12
HISTORICAL
J1861_201109
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements
2001-09-13
HISTORICAL
J1861_200109
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force b Pressure differential (input-output)
Standard

Air Brake Valves Test Procedure
2020-12-30
CURRENT
J1409_202012
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic, electronic, and electrical/pneumatic valves with respect to: a Input-output performance b Leakage characteristics c Low temperature evaluation d Elevated temperature evaluation e Corrosion resistance evaluation f Endurance testing g Structural integrity h Vibration testing
Standard

Air Brake Valves Test Procedure
2016-07-20
HISTORICAL
J1409_201607
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing
Standard

Air Brake Valves Test Procedure
2011-02-04
HISTORICAL
J1409_201102
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing
Standard

Air Brake Valves Test Procedure
2004-05-27
HISTORICAL
J1409_200405
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity
Standard

Air Brake Valves Test Procedure
1998-09-01
HISTORICAL
J1409_199809
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Characteristics b Leakage Measurement c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity
123Next >Last >>
X