Refine Your Search

Search Results

Standard

(R) Truck And Bus Grade Parking Performance Requirements

2004-01-22
HISTORICAL
J293_200401
This SAE Recommended Practice establishes minimum performance requirements for trucks, buses, truck-tractors, full trailers, and semitrailers with gross vehicle weight ratings greater than 4540 kg (10 000 lb) with regard to: a. Vehicle classification b. Vehicle load c. Percent grade d. Application force
Standard

Anti-Lock Brake System (Abs) Road Test Evaluation Procedure for Trucks, Truck-Tractors and Buses

2002-02-07
HISTORICAL
J2536_200202
Test procedure for Anti-Lock brake system (ABS/Anti-Lock) performance for on-highway commercial vehicles over 4536 kg (10 000 lb). This test procedure is intended to determine vehicle stability, maneuverability, stopping capability and system function on various road surface conditions including variable and uniform friction surfaces while brakes are modulated to obtain maximum performance with activation of ABS/Anti-Lock. This procedure does not cover radio frequency interference or power consumption testing. Reference SAE J46 Wheel-Slip Brake Control Road Test Code for passenger car and light truck test procedure.
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

2020-09-19
WIP
J225
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1971-01-01
HISTORICAL
J225_197101
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1993-06-10
HISTORICAL
J225_199306
This SAE Recommended Practice provides a field test procedure and instructions for: a. Instrumentation and Equipment b. Vehicle Preparation c. Test of air-braked single and combination vehicles d. Calculation of brake force distribution e. This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. This code provides a method to determine the brake force distribution (brake system effectiveness) for commercial vehicles.
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1988-08-01
HISTORICAL
J225_198808
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
Standard

Brake Force Distribution Performance Guide - Truck and Bus

2013-09-04
CURRENT
J1854_201309
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air-braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 4536 kg (10 000 lb) designed to be used on the highway in combination with other air-braked vehicles of this type in commercial operations.
Standard

Brake Force Distribution Performance Guide - Truck and Bus

2018-10-02
WIP
J1854
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 10 000 lb designed to be used on the highway in combination with other air braked vehicles of this type in commercial operations. The purpose of this document is to establish target threshold pressures and brake force outputs with reference to brake application pressures as measured at the rear control line gladhand of truck-tractors and towing trucks, the front control line gladhand of non-towing trailers, and the front and rear control line gladhand of towing trailers and dollies.
Standard

Brake Force Distribution Test Procedure - Trucks and Buses

2011-07-13
CURRENT
J1505_201107
This SAE Recommended Practice provides the test procedure and instructions for air braked single unit trucks, buses, and combination vehicles. It also provides recommendations for: a Instrumentation and equipment b Vehicle preparation c Calculating distribution of brake force
Standard

Brake Force Distribution Test Procedure-Trucks and Buses

2018-10-02
WIP
J1505
This SAE Recommended Practice provides the test procedure and instructions for air braked single unit trucks, buses, and combination vehicles. It also provides recommendations for: a. Instrumentation and equipment b. Vehicle preparation c. Calculating distribution of brake force This procedure provides a method to determine the brake force distribution and threshold pressures for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
Standard

Brake Rating Power Requirements - Truck and Bus

2019-07-18
CURRENT
J257_201907
The minimum performance values in this SAE Recommended Practice are applicable to vehicles with brake systems having typical service pressure ranges 0 to 16.6 MPa (0 to 2400 psi) hydraulic or 0 to 945 kPa (0 to 135 psi) air only. SAE J880 not only provides for determining maximum brake rating power capability, but also permits verification of any desired or arbitrary level such as the requirement established herein. The determining criteria for deciding brake rating power capability are: a. Cold brake stopping ability. b. Fade as a result of brake power absorption. c. Hot brake stopping ability following brake power absorption. d. Brake system stability following brake power absorption. e. Functional and structural integrity of brake system following test.
Standard

Brake Rating Power Requirements—Truck and Bus

2011-08-04
HISTORICAL
J257_201108
The minimum performance values in this SAE Recommended Practice are applicable to vehicles with brake systems having typical service pressure ranges 0 to 16.6 MPa (0 to 2400 psi) hydraulic or 0 to 945 kPa (0 to 135 psi) air only. SAE J880 not only provides for determining maximum brake rating power capability, but also permits verification of any desired or arbitrary level such as the requirement established herein. The determining criteria for deciding brake rating power capability are: a Cold brake stopping ability. b Fade as a result of brake power absorption. c Hot brake stopping ability following brake power absorption. d Brake system stability following brake power absorption. e Functional and structural integrity of brake system following test.
Standard

Brake Rating Power Requirements—Truck and Bus

1985-03-01
HISTORICAL
J257_198503
The minimum performance values in this SAE Recommended Practice are applicable to vehicles with brake systems having typical service pressure ranges 0 to 16.6 MPa (0 to 2400 psi) hydraulic or 0 to 945 kPa (0 to 135 psi) air only. SAE J880 not only provides for determining maximum brake rating power capability, but also permits verification of any desired or arbitrary level such as the requirement established herein. The determining criteria for deciding brake rating power capability are: a. Cold brake stopping ability. b. Fade as a result of brake power absorption. c. Hot brake stopping ability following brake power absorption. d. Brake system stability following brake power absorption. e. Functional and structural integrity of brake system following test.
Standard

Brake System Performance Requirements--Truck, Bus, and Combination of Vehicles

1978-03-01
HISTORICAL
J992B_197803
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
Standard

Brake System Performance Requirements--Truck, Bus, and Combination of Vehicles

1971-05-01
HISTORICAL
J992B_197105
This SAE Recommended Practice presents performance requirements for the brake systems of motor vehicles intended for roadway use and falling into the following classifications: Light trucks and buses: 6001-10 000 lb (2700-4500 kg) gvw; Truck and bus: Over 10 000 lb (4500 kg) gvw; combination of vehicles towing vehicles over 10 000 lb (4500 kg) gvw. Acceptable performance requirements are based on data obtained from applicable sections of SAE J786a (March, 1978). The purpose of this recommended practice is to establish the minimum brake system performance requirements with regard to: 3.1 Stopping ability--of cold brakes, as affected by vehicle speed. 3.2 Stopping ability--of hot brakes, as affected by vehicle speed and duty cycle. 3.3 Pedal force (air pressure) requirements--maximum allowable. 3.4 Brake stability. 3.5 stopping ability and recovery of wet brakes. 3.6 Stopping ability of emergency brake system. 3.7 Brake effectiveness distribution for vehicles in combination.
X