Refine Your Search

Search Results

Standard

Anti-Lock Brake System (Abs) Road Test Evaluation Procedure for Trucks, Truck-Tractors and Buses

2002-02-07
HISTORICAL
J2536_200202
Test procedure for Anti-Lock brake system (ABS/Anti-Lock) performance for on-highway commercial vehicles over 4536 kg (10 000 lb). This test procedure is intended to determine vehicle stability, maneuverability, stopping capability and system function on various road surface conditions including variable and uniform friction surfaces while brakes are modulated to obtain maximum performance with activation of ABS/Anti-Lock. This procedure does not cover radio frequency interference or power consumption testing. Reference SAE J46 Wheel-Slip Brake Control Road Test Code for passenger car and light truck test procedure.
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1971-01-01
HISTORICAL
J225_197101
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1993-06-10
HISTORICAL
J225_199306
This SAE Recommended Practice provides a field test procedure and instructions for: a. Instrumentation and Equipment b. Vehicle Preparation c. Test of air-braked single and combination vehicles d. Calculation of brake force distribution e. This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. This code provides a method to determine the brake force distribution (brake system effectiveness) for commercial vehicles.
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1988-08-01
HISTORICAL
J225_198808
This SAE Recommended Practice provides a field test procedure and instructions for: Instrumentation and Equipment Vehicle Preparation Test of air-braked single and combination vehicles Calculation of brake force distribution This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. Purpose This procedure provides a method to determine the brake force distribution (brake system effectiveness) for trucks and buses with a GVWR greater than 4536 kg (10 000 lb).
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

2003-04-29
CURRENT
J225_200304
This SAE Recommended Practice provides a field test procedure and instructions for: a Instrumentation and Equipment b Vehicle Preparation c Test of air-braked single and combination vehicles d Calculation of brake force distribution e This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505.
Standard

Brake Force Distribution Performance Guide - Truck and Bus

2018-10-02
WIP
J1854
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 10 000 lb designed to be used on the highway in combination with other air braked vehicles of this type in commercial operations. The purpose of this document is to establish target threshold pressures and brake force outputs with reference to brake application pressures as measured at the rear control line gladhand of truck-tractors and towing trucks, the front control line gladhand of non-towing trailers, and the front and rear control line gladhand of towing trailers and dollies.
Standard

Brake Force Distribution Performance Guide - Truck and Bus

2013-09-04
CURRENT
J1854_201309
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air-braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 4536 kg (10 000 lb) designed to be used on the highway in combination with other air-braked vehicles of this type in commercial operations.
Standard

Brake Rating Power Requirements - Truck and Bus

2019-07-18
CURRENT
J257_201907
The minimum performance values in this SAE Recommended Practice are applicable to vehicles with brake systems having typical service pressure ranges 0 to 16.6 MPa (0 to 2400 psi) hydraulic or 0 to 945 kPa (0 to 135 psi) air only. SAE J880 not only provides for determining maximum brake rating power capability, but also permits verification of any desired or arbitrary level such as the requirement established herein. The determining criteria for deciding brake rating power capability are: a. Cold brake stopping ability. b. Fade as a result of brake power absorption. c. Hot brake stopping ability following brake power absorption. d. Brake system stability following brake power absorption. e. Functional and structural integrity of brake system following test.
Standard

Brake System Rating Test Code - Commercial Vehicles

2011-10-05
CURRENT
J880_201110
This code is intended for commercial vehicles over 4500 kg (10 000 lb) with brake systems having typical service pressure ranges 0 to 14.1 mPa (0 to 2050 psi) hydraulic or 0 to 830 kPa (0 to 130 psi) air and is not directly applicable to vehicles with other systems. Air over hydraulic systems are to be tested as air systems.
Standard

Brake System Rating Test Code-Commercial Vehicles

2017-10-13
WIP
J880
This code is intended for commercial vehicles over 4500 kg (10 000 lb) with brake systems having typical service pressure ranges 0 to 14.1 mPa (0 to 2050 psi) hydraulic or 0 to 830 kPa (0 to 130 psi) air and is not directly applicable to vehicles with other systems. Air over hydraulic systems are to be tested as air systems.
Standard

Brake System Road Test Code - Truck, Bus, and Combination of Vehicles

1998-12-01
CURRENT
J786A_199812
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new trucks, buses, and combination of vehicles designed for roadway use and falling in the following classifications: Light trucks and buses: 6001–10,000 lb (2700–4500 kg) gvw Truck and bus: Over 10,000 lb (4500 kg) gvw Combination of vehicles (towing vehicle over 10,000 lb (4500 kg) gvw)
Standard

Brake System Road Test Code - Truck, Bus, and Combination of Vehicles

1971-05-01
HISTORICAL
J786A_197105
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new trucks, buses, and combination of vehicles designed for roadway use and falling in the following classifications: Light trucks and buses: 6001–10,000 lb (2700–4500 kg) gvw Truck and bus: Over 10,000 lb (4500 kg) gvw Combination of vehicles (towing vehicle over 10,000 lb (4500 kg) gvw)
Standard

Brake System Road Test Code--Truck, Bus, and Combination of Vehicles

1978-03-01
HISTORICAL
J786A_197803
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new trucks, buses, and combination of vehicles designed for roadway use and falling in the following classifications: Light trucks and buses: 6001-10,000 lb (2700-4500kg) gvw; Truck and bus: Over 10,000 lb (4500 kg) gvw; Combination of vehicles (towing vehicle over 10,000 lb (4500 kg) gvw
Standard

Drawbar Pull Performance Criteria

2012-05-24
CURRENT
J2503_201205
This SAE Performance Criteria code applies to vehicles that are tested in accordance with SAE J1729 and SAE J1626.
Standard

In-Service Brake Performance Test Procedure--Vehicles Over 4500 Kg (10 000 Lb)

1992-11-01
HISTORICAL
J1250_199211
This SAE Recommended Practice establishes a uniform practical series of subprocedures for level road testing of the brake performance of vehicles with gross vehicle weight ratings over 4500 kg (10 000 lb). The purpose of this practice is to establish a uniform method for use by operators and law enforcement agencies, to evaluate the condition of the brake systems of vehicles with GVWRs and GCWRs over 4500 kg (10 000 lb) under any condition of loading. By following the test procedures set forth, the operator and/or law enforcement agencies can ascertain if the vehicle meets the service brake and emergency brake stopping distance requirements of applicable State and Federal regulations.
Standard

In-Service Brake Performance Test Procedure--Vehicles Over 4500 kg (10 000 lb)

2000-09-29
CURRENT
J1250_200009
This SAE Recommended Practice establishes a uniform practical series of subprocedures for level road testing of the brake performance of vehicles with gross vehicle weight ratings over 4500 kg (10 000 lb). The purpose of this practice is to establish a uniform method for use by operators and law enforcement agencies, to evaluate the condition of the brake systems of vehicles with GVWRs and GCWRs over 4500 kg (10 000 lb) under any condition of loading. By following the test procedures set forth, the operator and/or law enforcement agencies can ascertain if the vehicle meets the service brake and emergency brake stopping distance requirements of applicable State and Federal regulations.
X